We will reply to your message within an hour.
More
Typically used with cylindrical, surface, and ID grinders, these wheels are specially designed to grind the inside diameter of workpieces.
The flexible backing on these wheels conforms to curved and rough surfaces.
Use these wheels for heavy material removal in one spot or along a weld seam. They are also known as Type 1 wheels and snagging wheels.
Wheels remove more material than other grinding wheels with cotton laminate.
A combination of cotton laminate and aluminum oxide abrasive creates a smoother surface than other grinding wheels with similar grits.
The abrasive grains in these discs are blended with rubber, which cushions during grinding to produce a smoother surface texture than other discs with similar grits. Discs attach to your grinder with a shank.
Set at an angle and widely spaced, the flaps reach into corners.
A special fastener on the back of these discs allows you to easily swap one disc for another.
The premium abrasive stays sharp longer.
These discs have a harder abrasive than standard quick-change discs.
The heavy duty construction provides more support than standard discs for heavy material removal.
The outer 3/8" of these discs is extremely flexible to prevent marring or gouging your work when sanding a radius or contour.
These discs have a harder abrasive than standard flexible-edge quick-change discs.
Debur, clean, and blend faster than other nylon mesh discs.
The abrasive-embedded nylon mesh construction gives you more control over sanding pressure.
Thicker, more pliable, and less aggressive than standard nylon mesh quick-change discs, use these for finer sanding on curved surfaces.
Used for heavy cleaning and stripping, these discs have an abrasive-embedded nylon mesh construction that gives you more control over sanding pressure.
These discs have a long-lasting diamond abrasive.
Press onto a compatible sanding tool or backup pad; peel off to remove.
A coating prevents dust and debris from building up on the abrasive surface.
The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.
The thick, abrasive-embedded nylon mesh construction gives you maximum control over sanding pressure.
These discs are abrasive-embedded cloth with a cushioned layer.
Secure the shank into the collet or chuck of your tool.
Use these wheels to cut through metal such as iron, stainless steel, and steel.
Run these high-density aluminum oxide wheels at higher speeds than standard cutoff wheels to make quick cuts in aluminum, iron, stainless steel, and steel.
Premium-grade abrasive materials and two layers of fiberglass mesh reinforcement give these wheels a longer life than standard cutoff wheels when cutting metal such as iron, stainless steel, and steel.
A ceramic alumina abrasive cuts through stainless steel.