Grinding Bits for Metals
Made of aluminum oxide, these bits are well suited for use on most metals and materials that are not heat sensitive.
Bits are also known as mounted points and die grinder bits. Head diameter is measured at the widest point.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
For technical drawings and 3-D models, click on a part number.
Head | Abrasive | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Max. Speed, rpm | Shape No. | Material | Bond Material | Shank Lg. | Choose a Grit (Surface Texture) | Pkg. Qty. | Pkg. | ||
1/4" Shank Dia. | |||||||||||
For Steel, Stainless Steel, Iron | |||||||||||
| 13 | 11/16" | 1 1/4" | 48,000 | A12 | Aluminum Oxide | Vitrified Clay | 1 1/2" | 5 | 00000000 | 000000 | |
Rubber-Cushioned Abrasive Grinding Bits for Metals
The abrasive grains in these bits are blended with rubber, which cushions during grinding to produce a smoother surface texture than other bits with similar grits. Bits are also known as mounted points and die grinder bits. Head diameter is measured at the widest point.
Bits for steel are aluminum oxide, which is the most common abrasive used in grinding metal.
Bits for aluminum, brass, and bronze are silicon carbide, which cuts through soft metals without generating much heat or causing material buildup.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
For technical drawings and 3-D models, click on a part number.
Head | Abrasive | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Max. Speed, rpm | Shape No. | Shape | Material | Bond Material | Shank Lg. | Choose a Grit (Surface Texture) | Each | ||
For Steel | |||||||||||
1/4" Shank Dia. | |||||||||||
| 5 | 11/16" | 1 1/4" | 48,000 | A12 | Cone | Aluminum Oxide | Rubber | 1 1/2" | 00000000 | 000000 | |
For Aluminum, Brass, Bronze | |||||||||||
1/4" Shank Dia. | |||||||||||
| 5 | 11/16" | 1 1/4" | 48,000 | A12 | Cone | Silicon Carbide | Rubber | 1 1/2" | 00000000 | 00000 | |
Hex-Shank Grinding Bits for Metals
Use bits in any drill chuck that accepts a 1/4" hex shank.
Bits are aluminum oxide, which is the most common abrasive used in grinding metal. They are also known as mounted points and die grinder bits. Head diameter is measured at the widest point.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Head | Abrasive | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Max. Speed, rpm | Shape No. | Shape | Material | Bond Material | Shank Lg. | Grit (Surface Texture) | Each | ||
For Steel, Iron | |||||||||||
1/4" Shank Hex Size | |||||||||||
| 6 | 11/16" | 1 1/4" | 48,000 | A12 | Cone | Aluminum Oxide | Vitrified Ceramic | 1 1/2" | 60 (Rough) Gray | 0000000 | 00000 |
Grinding Bits for Stainless Steel
Bits are specially formulated to stay cool during grinding, so they won’t mar or discolor stainless steel. They are also known as mounted points and die grinder bits. Head diameter is measured at the widest point.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
For technical drawings and 3-D models, click on a part number.
Head | Abrasive | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Max. Speed, rpm | Shape No. | Shape | Material | Bond Material | Shank Lg. | Grit (Surface Texture) | Each | ||
For Stainless Steel | |||||||||||
1/4" Shank Dia. | |||||||||||
| 3 | 11/16" | 1 1/4" | 48,000 | A12 | Cone | Aluminum Oxide | Vitrified Ceramic | 1 1/2" | 60 (Rough) Pink | 00000000 | 00000 |
Cotton-Laminate Grinding Bits for Metals
Made of cotton fiber layers embedded with aluminum-oxide grains, these bits grind and finish in one step. They’re ideal for light deburring, blending, and finishing metal. These grinding bits remove material more efficiently than rubber-cushioned bits. While grinding, they resist the buildup of aluminum, brass, bronze, and other nonferrous metal. They’re also known as mounted points and die grinder bits. Head diameter is measured at the widest point.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
For technical drawings and 3-D models, click on a part number.
Head | Abrasive | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Lg. | Max. Speed, rpm | Shape No. | Shape | Material | Bond Material | Shank Lg. | Grit (Surface Texture) | Each | ||
For Steel, Stainless Steel, Aluminum, Brass, Copper, Iron, Nickel, Titanium | |||||||||||
1/4" Shank Dia. | |||||||||||
| 3 | 11/16" | 1 1/4" | 38,050 | A12 | Cone | Cotton Laminate/Aluminum Oxide Blend | Rubber | 1 1/2" | 80 (Smooth) Blue-Gray | 00000000 | 000000 |