About Sanding Abrasives
More
Grinding Bit Sets for Nonmetals
Best for grinding composites, fiberglass, plaster, plastic, rubber, and wood without generating heat, these sets include a selection of our most popular tungsten carbide bits. The bits are also known as mounted points and die grinder bits.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
| No. of Pieces | Includes | Abrasive Material | Shank Lg. | Grit (Surface Texture) | Each | |
For Composites, Fiberglass, Plaster, Plastic, Rubber, Wood | ||||||
|---|---|---|---|---|---|---|
1/8" Shank Dia. | ||||||
| 7 | 1 1/4" Dia. Cutoff Wheel, Barrel Grinding Bit, Disc Grinding Bit, Two Cone Bits, Two Cylindrical Bits | Tungsten Carbide | 7/8" | 50 grit (Rough) Bronze | 0000000 | 0000000 |
Long-Life Spiral-Wound Sanding Rolls
The premium abrasive stays sharp longer. Use these rolls in channels, fillets, recesses, contours, sidewalls, and other hard-to-reach spots. As the outer layer wears away, new abrasive is exposed. Also known as cartridge rolls. A shank adapter is required (sold separately).
Straight
| Dia. | Lg. | Arbor Hole Dia. | Max. Speed, rpm | Abrasive Material | Abrasive Backing Material | For Use On | For Use With | Pkg. Qty. | Choose a Grit | Pkg. | |
For Rough Finish | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/2" | 1" | 1/8" | 26,000 | Zirconia Alumina | Cloth | Steel, Wood | Grinders for Bits and Burs | 25 | 50 | 0000000 | 000000 |
| 1/2" | 1 1/2" | 1/8" | 26,000 | Zirconia Alumina | Cloth | Steel, Wood | Grinders for Bits and Burs | 25 | 50 | 0000000 | 00000 |
| 5/8" | 1" | 3/16" | 18,000 | Zirconia Alumina | Cloth | Steel, Wood | Grinders for Bits and Burs | 10 | 50 | 0000000 | 00000 |
| 5/8" | 1 1/2" | 3/16" | 18,000 | Zirconia Alumina | Cloth | Steel, Wood | Grinders for Bits and Burs | 10 | 50 | 0000000 | 00000 |
| 3/4" | 1" | 3/16" | 18,000 | Zirconia Alumina | Cloth | Steel, Wood | Grinders for Bits and Burs | 10 | 0000000 | 00000 | |
| 3/4" | 1 1/2" | 3/16" | 18,000 | Zirconia Alumina | Cloth | Steel, Wood | Grinders for Bits and Burs | 10 | 50 | 0000000 | 00000 |
Required Shank Adapters
| Shank Dia. | Overall Lg. | Each | |
For 3/4" and 1" Lg. Rolls with 1/8" Arbor Hole Dia. | |||
|---|---|---|---|
| 1/8" | 2 3/4" | 0000000 | 00000 |
| 1/4" | 2 1/2" | 0000000 | 0000 |
| 1/4" | 4" | 0000000 | 0000 |
| 1/4" | 6" | 0000000 | 0000 |
For 3/4" and 1" Lg. Rolls with 3/16" Arbor Hole Dia. | |||
| 1/4" | 2 3/4" | 0000000 | 0000 |
For 1 1/2" Lg. Rolls with 1/8" Arbor Hole Dia. | |||
| 1/8" | 3" | 0000000 | 0000 |
| 1/4" | 2 3/4" | 0000000 | 0000 |
| 1/4" | 4" | 0000000 | 0000 |
| 1/4" | 6" | 0000000 | 0000 |
For 1 1/2" Lg. Rolls with 3/16" Arbor Hole Dia. | |||
| 1/4" | 3" | 0000000 | 0000 |
Spiral-Wound Sanding Rolls
As the outer layer wears away, new abrasive is exposed. Also known as cartridge rolls. A shank adapter is required (sold separately).
Straight rolls are for use in channels, fillets, recesses, contours, sidewalls, and other hard-to-reach spots.
Tapered rolls are for use on angles, corners, concave contours, funnel-shaped recesses, and other intricate shapes. The diameter listed is for the large end of the roll.
Straight
Tapered
| Dia. | Lg. | Arbor Hole Dia. | Max. Speed, rpm | Abrasive Material | Abrasive Backing Material | For Use On | For Use With | Pkg. Qty. | Grit | Pkg. | |
Straight Rolls | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
For Rough Finish | |||||||||||
| 1/4" | 1" | 1/8" | 26,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 25 | 50 | 00000000 | 00000 |
| 1/4" | 1 1/2" | 1/8" | 26,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 25 | 50 | 00000000 | 00000 |
| 5/16" | 1" | 1/8" | 26,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 25 | 50 | 00000000 | 00000 |
| 5/16" | 1 1/2" | 1/8" | 26,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 25 | 50 | 00000000 | 00000 |
| 3/8" | 1" | 1/8" | 26,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 25 | 50 | 00000000 | 00000 |
| 3/8" | 1 1/2" | 1/8" | 26,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 25 | 50 | 00000000 | 00000 |
| 1/2" | 3/4" | 1/8" | 26,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 25 | 50 | 00000000 | 00000 |
| 1/2" | 1" | 1/8" | 26,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 25 | 50 | 00000000 | 00000 |
| 1/2" | 1 1/2" | 1/8" | 26,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 25 | 50 | 00000000 | 00000 |
| 5/8" | 1" | 3/16" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 10 | 50 | 00000000 | 0000 |
| 5/8" | 1 1/2" | 3/16" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 10 | 50 | 00000000 | 00000 |
| 5/8" | 2" | 3/16" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 10 | 50 | 00000000 | 00000 |
| 3/4" | 1" | 3/16" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 10 | 50 | 00000000 | 00000 |
| 3/4" | 1 1/2" | 3/16" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 10 | 50 | 00000000 | 00000 |
| 3/4" | 2" | 3/16" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 10 | 50 | 00000000 | 00000 |
| 1" | 1" | 3/16" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 10 | 50 | 00000000 | 00000 |
| 1" | 1 1/2" | 3/16" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 10 | 50 | 00000000 | 00000 |
| 1" | 2" | 3/16" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 5 | 50 | 00000000 | 00000 |
Tapered Rolls | |||||||||||
For Rough Finish | |||||||||||
| 3/8" | 1" | 1/8" | 26,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 25 | 50 | 00000000 | 00000 |
| 3/8" | 1 1/2" | 1/8" | 26,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 25 | 50 | 00000000 | 00000 |
| 1/2" | 1" | 1/8" | 26,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 25 | 50 | 00000000 | 00000 |
| 1/2" | 1 1/2" | 1/8" | 26,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 10 | 50 | 00000000 | 00000 |
| 5/8" | 1" | 1/8" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 10 | 50 | 00000000 | 00000 |
| 5/8" | 1 1/2" | 1/8" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 10 | 50 | 00000000 | 00000 |
| 3/4" | 1 1/2" | 3/16" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 10 | 50 | 00000000 | 00000 |
| 3/4" | 2" | 3/16" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 10 | 50 | 00000000 | 00000 |
| 7/8" | 1 1/2" | 3/16" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 10 | 50 | 00000000 | 00000 |
| 1" | 1" | 3/16" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 10 | 50 | 00000000 | 00000 |
| 1" | 1 1/2" | 3/16" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 10 | 50 | 00000000 | 00000 |
| 1" | 2" | 3/16" | 18,000 | Aluminum Oxide | Cloth | Steel, Wood | Grinders for Bits and Burs | 10 | 50 | 00000000 | 00000 |
Required Shank Adapters
| Shank Dia. | Overall Lg. | Each | |
For 3/4" and 1" Lg. Rolls with 1/8" Arbor Hole Dia. | |||
|---|---|---|---|
| 1/8" | 2 3/4" | 0000000 | 00000 |
| 1/4" | 2 1/2" | 0000000 | 0000 |
| 1/4" | 4" | 0000000 | 0000 |
| 1/4" | 6" | 0000000 | 0000 |
For 3/4" and 1" Lg. Rolls with 3/16" Arbor Hole Dia. | |||
| 1/4" | 2 3/4" | 0000000 | 0000 |
For 1 1/2" Lg. Rolls with 1/8" Arbor Hole Dia. | |||
| 1/8" | 3" | 0000000 | 0000 |
| 1/4" | 2 3/4" | 0000000 | 0000 |
| 1/4" | 4" | 0000000 | 0000 |
| 1/4" | 6" | 0000000 | 0000 |
For 1 1/2" Lg. Rolls with 3/16" Arbor Hole Dia. | |||
| 1/4" | 3" | 0000000 | 0000 |
For 2" Lg. Rolls with 3/16" Arbor Hole Dia. | |||
| 1/4" | 3 1/2" | 0000000 | 0000 |