We will reply to your message within an hour.
For moving heavy products on shipping and assembly lines, these have three times the load capacity of our standard roller conveyors.
These rollers have 2 1/2" or 3 1/2" diameters.
Mix and match conveyors and stands to design a conveyor system that moves parts exactly where they need to go.
Conveyors are made of corrosion-resistant stainless steel, making them suitable for washdown applications.
These conveyors are designed to rest on a work surface instead of a stand.
For more demanding shipping and assembly applications, these conveyors can carry heavy loads. They are made of corrosion-resistant stainless steel making them suitable for washdown applications.
Move delicate items, such as glass and painted parts, through your facility without scratching or denting them.
Also known as line-shaft conveyors, these conveyors are driven by a drive shaft and round belts.
Push glass, painted objects, and other delicate material from one workstation to the next.
Expand, curve, and retract the accordion-style frame to position these conveyors wherever you need them.
Push small items from person to person in areas with frequent washdowns.
Expand, retract, and curve these conveyors wherever you need them—they’re ready to run once you plug them in.
Rollers have a standard 1.9" diameter to fit most roller conveyors.
Rollers have diameters between 2" and 4".
Choose the width you need from 6" to 60" in 1/16" increments.
These rollers have diameters 1 3/8" and below.
These rollers have diameters 1 3/4" and below.
Made from stainless steel, these rollers are suitable for washdown applications. They have a standard 1.9" diameter to fit most roller conveyors.
All stainless steel construction makes these rollers suitable for washdown applications. They have 2 1/2" diameters.
These rollers have 0.78" diameters.
Rollers are made from thick, 12-ga. steel so they're less likely to dent than standard 16-ga. rollers.
Rollers have maintenance-free, precision bearings to reduce conveyor noise.
Improve tracking on curved conveyor sections. Rollers taper so packages maintain their orientation through the curve.
Rollers move in one direction so they won't roll back when idle, keeping packages in place.
Rollers are grooved to accommodate round belts on line-shaft conveyors.
We'll get the between frame width and groove spacing you need in 1/16" increments.
Connect to other rollers with two grooves to power a gravity conveyor or build a custom powered conveyor.
Rollers are tapered for use on curved conveyor sections.
Replace rollers on a chain-driven conveyor.
We'll get the between frame width and sprocket spacing you need in 1/16" increments.
Use these bearings to replace worn and damaged bearings or press-fit them into tubing or pipe to create a roller. All have a hex-shaped axle.
Replace worn and damaged bearings or press-fit bearings into tubing or pipe to create a roller.
Sleeve bearings ride directly on the axle and have no moving parts to wear out.
Also known as pallet brakes, these reducers mount on a gravity conveyor and create friction on the rollers to control the conveyor's speed.
Mount to a conveyor frame to recondition a worn hex axle hole or to convert a round axle hole to a hex axle hole.
Use in pairs to support a conveyor roller or package stop.
Reduce noise, absorb impact, and extend roller life.
Covers fit loosely over the roller to allow packages to accumulate. Rollers can continue spinning inside the cover without causing damage to packages.
Add a package stop on a conveyor to control product flow and allow for accumulation.
Use rails to convey packages and pallets in flow racks and confined spaces.
Configure wheels where you need them on these economical rails that you can cut to length.
All-steel construction and tightly spaced wheels with double ball bearings gives these rails the strength needed to handle heavy loads.
The flange on the wheels separates and guides packages as they flow down the rails.
Rotate materials in any direction on these flow rails.
Side rails keep packages from sliding off.
An accordion-style frame lets you quickly curve, expand, and retract these conveyors. They have skate wheels for flat-bottom objects in assembly lines or packaging and shipping applications.
Replace damaged wheels or use multiple wheels to build a custom conveyor.
These wheels have rollers that rotate around the wheel core to allow movement in any direction.
A flange on these wheels separates material while guiding it down the line.
Create a low-profile conveying surface.
Skate wheel conveyors are for light duty loading and unloading of flat-bottom objects.
Extend these conveyors more than 60 ft. to move items over long stretches and then retract them to a more compact 10 ft. for storage. Often used to load trailers, they’re best for light duty loading of boxes and other flat-bottomed objects.
Also known as ball-bearing parallels, these plates have multidirectional balls that project from the top and bottom to position and move small, heavy items over short distances.
These plates are designed to rest on a flat surface and are good for rotating and positioning heavy workpieces.
Snap these ball transfers together like jigsaw pieces to create a custom ball transfer plate, or use them unconnected to create your own pattern for rotating and positioning material. They have magnets embedded in the frame, so you can mount them on any flat magnetic metal surface and rearrange them as your operations change.
The flange has mounting holes for fastening.
To keep out dirt and debris, these flange-mount ball transfers have a double-sealed ball and side vents that expel contaminants.
These ball transfers have capacities up to 2,400 lbs.
A thick rubber cushion underneath these ball transfers absorbs impact and reduces vibration.
These ball transfers and stops rise when you supply air and retract into the housing when air supply ceases.
Unlike most ball transfers, which have metal balls, these have a plastic outer ball that rolls on stainless steel inner balls, so there's no metal-on-metal contact that could create and release particles into your clean room. They've also been ultrasonically cleaned and then individually bagged to prevent dust contamination.
With a ball recessed into the mounting surface, these ball transfers have a low profile. Their double-sealed ball keeps out dirt and debris, and side vents expel contaminants.
These heavy duty ball transfers recess into the mounting surface for a low profile.
Transfers recess into the mounting surface for a low profile.
These ball transfers have capacities up to 2,200 lbs.
Install these ball transfers in a threaded hole or use a nut to secure.
A double-sealed ball keeps out dirt and debris, and side vents expel contaminants.
The ball in these transfers is spring-loaded to absorb impact.
A large-diameter rubber ball handles delicate or polished surfaces. The stem spins and the ball rotates around the stem.
These ball transfers have capacities up to 3,300 lbs.
Drop-in design makes for easy installation.
Use these 2- to 3-foot conveyor sections alone or add to a roller conveyor to rotate and position material along a conveying line.
Build a mini conveyor in any shape you need. These conveyors have curved, straight, incline, and decline runs that you can quickly join together with the included brackets.
Protect conveyed material from dust, debris, and other contaminants.
Fittings come in two pieces to wrap around rails, so you can quickly modify existing structures without disassembling. Use clamp-on framing and fittings to form temporary partitions, modular conveyors, and workstations.
Add rollers to T-slotted framing to create flow rails, ball transfer tables, and other manual conveyors.
Mount these trolleys to your existing channel to create a cable and hose travel system.
Control the movement of loads on your conveyor—the rod on these air cylinders extends to stop loads and retracts to let them pass.
Space out parts on your conveyor line or vibratory feeder. Also known as escapements, these air cylinders have at least one finger that extends to hold parts and then retracts to release them.
Stop heavy material in its tracks. With the same footprint as regular load-stopping air cylinders, these air cylinders have a lever end that absorbs 30% more force.
Automate stopping loads on a conveyor—the rod on these cylinders extends to stop loads and retracts to let them pass.