Filter by
Material
Width
Tolerance Rating
Mechanical Finish
Hardness Rating
Fabrication
Yield Strength
End Type
Appearance
Heat Treatment
Specifications Met
Heat Treatable
Maximum Hardness After Heat Treatment
DFARS Specialty Metals
Maximum Temperature
Elongation
About Carbon Steel, Alloy Steel, Spring Steel, and Cast Iron
More
About Shafts
More
Tight-Tolerance Ultra-Machinable 12L14 Carbon Steel Rods
- Yield Strength: 65,000 psi
- Hardness: Rockwell B80 (Medium)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C65
- Fabrication: Cold Worked
- Specifications Met: ASTM A108
Ready for turning in a lathe, these rods are precision ground and held to a strict straightness tolerance. The lead additive acts as a lubricant, which allows 12L14 carbon steel to withstand very fast machining. It's used to fabricate a wide variety of machine parts, such as shaft couplings, studs, and pins. These rods meet ASTM A108 quality and performance standards. For added wear resistance, they can be surface hardened with heat treating.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Dia. | Dia. Tolerance | Mechanical Finish | Straightness Tolerance | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 4 ft. Lg. | 6 ft. Lg. | 8 ft. Lg. | 12 ft. Lg. | |
| 1/16" | -0.0005" to 0" | Precision Ground | 1/16" per 3 ft. | 00000000 | ||||||||
| 3/32" | -0.0005" to 0" | Precision Ground | 1/16" per 3 ft. | 0000000 | ||||||||
| 1/8" | -0.0005" to 0" | Precision Ground | 1/16" per 3 ft. | 0000000 | ||||||||
| 5/32" | -0.0005" to 0" | Precision Ground | 1/16" per 3 ft. | 0000000 | ||||||||
| 3/16" | -0.0005" to 0" | Precision Ground | 1/16" per 3 ft. | 0000000 | ||||||||
| 1/4" | -0.0005" to 0" | Precision Ground | 1/16" per 3 ft. | 00000000 | ||||||||
| 5/16" | -0.0005" to 0" | Precision Ground | 1/16" per 3 ft. | 00000000 | ||||||||
| 3/8" | -0.0005" to 0" | Precision Ground | 1/16" per 3 ft. | 00000000 | ||||||||
| 7/16" | -0.0005" to 0" | Precision Ground | 1/16" per 3 ft. | 00000000 | ||||||||
| 1/2" | -0.0005" to 0" | Precision Ground | 1/16" per 3 ft. | 00000000 | ||||||||
| 9/16" | -0.0005" to 0" | Precision Ground | 1/16" per 3 ft. | 0000000 | ||||||||
| 5/8" | -0.0005" to 0" | Precision Ground | 1/16" per 3 ft. | 00000000 | ||||||||
| 3/4" | -0.0005" to 0" | Precision Ground | 1/16" per 3 ft. | 00000000 | ||||||||
| 7/8" | -0.0005" to 0" | Precision Ground | 1/16" per 3 ft. | 00000000 | ||||||||
| 1" | -0.0005" to 0" | Precision Ground | 1/16" per 3 ft. | 00000000 | ||||||||
| 1 1/8" | -0.0005" to 0" | Precision Ground | 1/16" per 3 ft. | 0000000 | ||||||||
| 1 1/4" | -0.0005" to 0" | Precision Ground | 1/16" per 3 ft. | 00000000 | ||||||||
| 1 3/8" | -0.0005" to 0" | Precision Ground | 1/16" per 3 ft. | 0000000 | ||||||||
| 1 1/2" | -0.0005" to 0" | Precision Ground | 1/16" per 3 ft. | 00000000 | ||||||||
| 1 5/8" | -0.0005" to 0" | Precision Ground | 1/16" per 3 ft. | 0000000 | ||||||||
| 1 3/4" | -0.0005" to 0" | Precision Ground | 1/16" per 3 ft. | 0000000 | ||||||||
| 1 7/8" | -0.0005" to 0" | Precision Ground | 1/16" per 3 ft. | 0000000 | ||||||||
| 2" | -0.0005" to 0" | Precision Ground | 1/16" per 3 ft. | 0000000 | ||||||||
| 2 1/2" | -0.0005" to 0" | Precision Ground | 1/16" per 3 ft. | 0000000 | ||||||||
| 2 5/8" | -0.0005" to 0" | Precision Ground | 1/16" per 3 ft. | 0000000 | ||||||||
| 2 3/4" | -0.0005" to 0" | Precision Ground | 1/16" per 3 ft. | 00000000 | ||||||||
| 2mm | -0.012mm to 0mm | Precision Ground | 1/16" per 3 ft. | 00000000 | ||||||||
| 3mm | -0.012mm to 0mm | Precision Ground | 1/16" per 3 ft. | 00000000 | ||||||||
| 4mm | -0.012mm to 0mm | Precision Ground | 1/16" per 3 ft. | 00000000 | ||||||||
| 5mm | -0.012mm to 0mm | Precision Ground | 1/16" per 3 ft. | 00000000 | ||||||||
| 6mm | -0.012mm to 0mm | Precision Ground | 1/16" per 3 ft. | 00000000 | ||||||||
| 7mm | -0.012mm to 0mm | Precision Ground | 1/16" per 3 ft. | 00000000 | ||||||||
| 8mm | -0.012mm to 0mm | Precision Ground | 1/16" per 3 ft. | 00000000 | ||||||||
| 9mm | -0.012mm to 0mm | Precision Ground | 1/16" per 3 ft. | 00000000 | ||||||||
| 10mm | -0.012mm to 0mm | Precision Ground | 1/16" per 3 ft. | 00000000 | ||||||||
| 12mm | -0.012mm to 0mm | Precision Ground | 1/16" per 3 ft. | 00000000 | ||||||||
| 13mm | -0.012mm to 0mm | Precision Ground | 1/16" per 3 ft. | 00000000 | ||||||||
| 14mm | -0.012mm to 0mm | Precision Ground | 1/16" per 3 ft. | 00000000 | ||||||||
| 15mm | -0.012mm to 0mm | Precision Ground | 1/16" per 3 ft. | 00000000 | ||||||||
| 16mm | -0.012mm to 0mm | Precision Ground | 1/16" per 3 ft. | 0000000 | ||||||||
| 18mm | -0.012mm to 0mm | Precision Ground | 1/16" per 3 ft. | 0000000 | ||||||||
| 20mm | -0.012mm to 0mm | Precision Ground | 1/16" per 3 ft. | 00000000 | ||||||||
| 25mm | -0.012mm to 0mm | Precision Ground | 1/16" per 3 ft. | 00000000 | ||||||||
| 30mm | -0.012mm to 0mm | Precision Ground | 1/16" per 3 ft. | 0000000 | ||||||||
| 35mm | -0.012mm to 0mm | Precision Ground | 1/16" per 3 ft. | 0000000 | ||||||||
| 40mm | -0.012mm to 0mm | Precision Ground | 1/16" per 3 ft. | 00000000 | ||||||||
| 45mm | -0.012mm to 0mm | Precision Ground | 1/16" per 3 ft. | 0000000 | ||||||||
| 50mm | -0.012mm to 0mm | Precision Ground | 1/16" per 3 ft. | 0000000 |
Ultra-Machinable 12L14 Carbon Steel Rods
- Yield Strength: 60,000 psi
- Hardness: Rockwell B85 (Medium)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Not Rated
- Specifications Met: ASTM A108
The lead additive acts as a lubricant, which allows 12L14 carbon steel to withstand very fast machining. It's used to fabricate a wide variety of machine parts.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Dia. | Dia. Tolerance | Fabrication | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
| 1/4" | -0.002" to 0" | Cold Worked | 000000000 | |||
| 3/8" | -0.002" to 0" | Cold Worked | 000000000 | |||
| 7/16" | -0.002" to 0" | Cold Worked | 000000000 | |||
| 1/2" | -0.002" to 0" | Cold Worked | 000000000 | |||
| 5/8" | -0.002" to 0" | Cold Worked | 000000000 | |||
| 3/4" | -0.002" to 0" | Cold Worked | 000000000 | |||
| 7/8" | -0.002" to 0" | Cold Worked | 000000000 | |||
| 1" | -0.002" to 0" | Cold Worked | 000000000 | |||
| 1 1/8" | -0.002" to 0" | Cold Worked | 000000000 | |||
| 1 1/4" | -0.002" to 0" | Cold Worked | 000000000 | |||
| 1 3/8" | -0.002" to 0" | Cold Worked | 000000000 | |||
| 1 1/2" | -0.002" to 0" | Cold Worked | 000000000 | |||
| 1 5/8" | -0.003" to 0" | Cold Worked | 00000000 | |||
| 1 3/4" | -0.003" to 0" | Cold Worked | 00000000 | |||
| 1 7/8" | -0.003" to 0" | Cold Worked | 00000000 | |||
| 2" | -0.003" to 0" | Cold Worked | 00000000 | |||
| 2 1/8" | -0.003" to 0" | Cold Worked | 00000000 | |||
| 2 1/4" | -0.003" to 0" | Cold Worked | 00000000 | |||
| 2 3/8" | -0.003" to 0" | Cold Worked | 00000000 | |||
| 2 1/2" | -0.003" to 0" | Cold Worked | 00000000 | |||
| 2 5/8" | -0.004" to 0" | Cold Worked | 00000000 | |||
| 2 3/4" | -0.004" to 0" | Cold Worked | 00000000 | |||
| 2 7/8" | -0.004" to 0" | Cold Worked | 00000000 | |||
| 3" | -0.004" to 0" | Cold Worked | 00000000 | |||
| 3 1/8" | -0.004" to 0" | Cold Worked | 00000000 | |||
| 3 1/4" | -0.004" to 0" | Cold Worked | 00000000 | |||
| 3 1/2" | -0.004" to 0" | Cold Worked | 00000000 | |||
| 3 3/4" | -0.004" to 0" | Cold Worked | 00000000 | |||
| 4" | -0.004" to 0" | Cold Worked | 00000000 |
Ultra-Machinable 12L14 Carbon Steel Bars
- Yield Strength: 60,000 psi
- Hardness: Rockwell B85 (Medium)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C60
- Specifications Met: ASTM A108
The lead additive acts as a lubricant, which allows 12L14 carbon steel to withstand very fast machining. It's used to fabricate a wide variety of machine parts.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Thick. | Thick. Tolerance | Wd. | Heat Treatment | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
| 1/4" | -0.002" to 0" | 1/4" | Annealed (Softened) | 00000000 | |||
| 5/16" | -0.002" to 0" | 5/16" | Annealed (Softened) | 00000000 | |||
| 3/8" | -0.002" to 0" | 3/8" | Annealed (Softened) | 00000000 | |||
| 7/16" | -0.002" to 0" | 7/16" | Annealed (Softened) | 00000000 | |||
| 1/2" | -0.002" to 0" | 1/2" | Annealed (Softened) | 00000000 | |||
| 9/16" | -0.002" to 0" | 9/16" | Annealed (Softened) | 0000000 | |||
| 5/8" | -0.002" to 0" | 5/8" | Annealed (Softened) | 0000000 | |||
| 3/4" | -0.002" to 0" | 3/4" | Annealed (Softened) | 0000000 | |||
| 7/8" | -0.003" to 0" | 7/8" | Annealed (Softened) | 0000000 | |||
| 1" | -0.003" to 0" | 1" | Annealed (Softened) | 0000000 | |||
| 1 1/8" | -0.003" to 0" | 1 1/8" | Annealed (Softened) | 0000000 | |||
| 1 1/4" | -0.003" to 0" | 1 1/4" | Annealed (Softened) | 0000000 | |||
| 1 3/8" | -0.003" to 0" | 1 3/8" | Annealed (Softened) | 00000000 | |||
| 1 1/2" | -0.003" to 0" | 1 1/2" | Annealed (Softened) | 0000000 | |||
| 1 3/4" | -0.004" to 0" | 1 3/4" | Annealed (Softened) | 0000000 | |||
| 2" | -0.004" to 0" | 2" | Annealed (Softened) | 0000000 | |||
| 2 1/4" | -0.004" to 0" | 2 1/4" | Annealed (Softened) | 0000000 | |||
| 2 1/2" | -0.004" to 0" | 2 1/2" | Annealed (Softened) | 0000000 |
Ultra-Machinable 12L14 Carbon Steel Hex Bars
- Yield Strength: 60,000 psi
- Hardness: Rockwell B85 (Medium)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C60
- Specifications Met: ASTM A108
The lead additive acts as a lubricant, which allows 12L14 carbon steel to withstand very fast machining. It's used to fabricate a wide variety of machine parts.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Wd. | Wd. Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
| 3/16" | -0.002" to 0" | 00000000 | |||
| 1/4" | -0.002" to 0" | 00000000 | |||
| 5/16" | -0.002" to 0" | 00000000 | |||
| 3/8" | -0.002" to 0" | 00000000 | |||
| 7/16" | -0.002" to 0" | 00000000 | |||
| 1/2" | -0.002" to 0" | 00000000 | |||
| 9/16" | -0.002" to 0" | 00000000 | |||
| 5/8" | -0.002" to 0" | 00000000 | |||
| 11/16" | -0.002" to 0" | 00000000 | |||
| 3/4" | -0.002" to 0" | 00000000 | |||
| 13/16" | -0.003" to 0" | 00000000 | |||
| 7/8" | -0.003" to 0" | 0000000 | |||
| 15/16" | -0.003" to 0" | 00000000 | |||
| 1" | -0.003" to 0" | 0000000 | |||
| 1 1/8" | -0.003" to 0" | 00000000 | |||
| 1 1/4" | -0.003" to 0" | 0000000 | |||
| 1 3/8" | -0.003" to 0" | 0000000 | |||
| 1 1/2" | -0.003" to 0" | 0000000 | |||
| 1 3/4" | -0.004" to 0" | 0000000 | |||
| 2" | -0.004" to 0" | 0000000 | |||
| 3" | -0.005" to 0" | 0000000 |
Rotary Shafts
Combine these general purpose drive shafts with gears, sprockets, and bearings to transmit rotary motion. All are turned, precision ground, and polished to meet tight diameter and straightness tolerances. This means these shafts evenly distribute loads, reduce vibration, and improve accuracy and stability.
Steel shafts are generally stronger than stainless steel shafts but not as corrosion resistant. Carbon steel shafts balance high strength and good machinability, making them ideal for general purpose use. 12L14 carbon steel shafts have a lead additive that makes them easier to machine than any other rotary shaft but also more prone to wear.
Shafts with chamfered edges reduce damage to bearings, housings, and other components during installation.
For technical drawings and 3-D models, click on a part number.
| Lg. | Lg. Tolerance | Straightness Tolerance | Edge Type | Hardness Rating | Hardness | Each | |
Inch—12L14 Carbon Steel | |||||||
|---|---|---|---|---|---|---|---|
1/32" Dia. (Tolerance: -0.0002" to 0") | |||||||
| 3" | -0.01" to 0.01" | Not Rated | Chamfered | Medium | Brinell 167 | 000000 | 00000 |
| 4" | -0.01" to 0.01" | Not Rated | Chamfered | Medium | Brinell 167 | 000000 | 0000 |
| 5" | -0.01" to 0.01" | Not Rated | Chamfered | Medium | Brinell 167 | 000000 | 0000 |
| 6" | -0.01" to 0.01" | Not Rated | Chamfered | Medium | Brinell 167 | 0000000 | 0000 |
| 9" | -0.01" to 0.01" | Not Rated | Chamfered | Medium | Brinell 167 | 000000 | 00000 |
| 12" | -0.01" to 0.01" | Not Rated | Chamfered | Medium | Brinell 167 | 0000000 | 00000 |
| 18" | -0.01" to 0.01" | Not Rated | Chamfered | Medium | Brinell 167 | 0000000 | 00000 |
1/16" Dia. (Tolerance: -0.0002" to 0") | |||||||
| 3" | -0.01" to 0.01" | Not Rated | Chamfered | Medium | Brinell 167 | 0000000 | 0000 |
| 4" | -0.01" to 0.01" | Not Rated | Chamfered | Medium | Brinell 167 | 0000000 | 0000 |
| 6" | -0.01" to 0.01" | Not Rated | Chamfered | Medium | Brinell 167 | 0000000 | 0000 |
| 9" | -0.01" to 0.01" | Not Rated | Chamfered | Medium | Brinell 167 | 0000000 | 0000 |
| 12" | -0.01" to 0.01" | Not Rated | Chamfered | Medium | Brinell 167 | 0000000 | 0000 |
| 18" | -0.01" to 0.01" | Not Rated | Chamfered | Medium | Brinell 167 | 0000000 | 00000 |
| 24" | -0.01" to 0.01" | Not Rated | Chamfered | Medium | Brinell 167 | 0000000 | 00000 |
| 36" | -0.01" to 0.01" | Not Rated | Chamfered | Medium | Brinell 167 | 0000000 | 00000 |
1/8" Dia. (Tolerance: -0.0002" to 0") | |||||||
| 3" | -0.01" to 0.01" | 0.0036" per ft. | Chamfered | Medium | Brinell 167 | 0000000 | 0000 |
| 4" | -0.01" to 0.01" | 0.0036" per ft. | Chamfered | Medium | Brinell 167 | 0000000 | 0000 |
| 5" | -0.01" to 0.01" | 0.0036" per ft. | Chamfered | Medium | Brinell 167 | 0000000 | 0000 |
| 6" | -0.01" to 0.01" | 0.0036" per ft. | Chamfered | Medium | Brinell 167 | 0000000 | 0000 |
| 9" | -0.01" to 0.01" | 0.0036" per ft. | Chamfered | Medium | Brinell 167 | 0000000 | 0000 |
| 12" | -0.01" to 0.01" | 0.0036" per ft. | Chamfered | Medium | Brinell 167 | 0000000 | 0000 |
| 18" | -0.01" to 0.01" | 0.0036" per ft. | Chamfered | Medium | Brinell 167 | 0000000 | 00000 |
| 24" | -0.01" to 0.01" | 0.0036" per ft. | Chamfered | Medium | Brinell 167 | 0000000 | 00000 |
| 36" | -0.01" to 0.01" | 0.0036" per ft. | Chamfered | Medium | Brinell 167 | 0000000 | 00000 |
3/16" Dia. (Tolerance: -0.0002" to 0") | |||||||
| 3" | -0.01" to 0.01" | 0.0036" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 0000 |
| 4" | -0.01" to 0.01" | 0.0036" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 0000 |
| 5" | -0.01" to 0.01" | 0.0036" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 0000 |
| 6" | -0.01" to 0.01" | 0.0036" per ft. | Chamfered | Medium | Brinell 167 | 0000000 | 0000 |
| 9" | -0.01" to 0.01" | 0.0036" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 0000 |
| 12" | -0.01" to 0.01" | 0.0036" per ft. | Chamfered | Medium | Brinell 167 | 0000000 | 0000 |
| 18" | -0.01" to 0.01" | 0.0036" per ft. | Chamfered | Medium | Brinell 167 | 0000000 | 00000 |
| 24" | -0.01" to 0.01" | 0.0036" per ft. | Chamfered | Medium | Brinell 167 | 0000000 | 00000 |
| 36" | -0.01" to 0.01" | 0.0036" per ft. | Chamfered | Medium | Brinell 167 | 0000000 | 00000 |
1/4" Dia. (Tolerance: -0.0002" to 0") | |||||||
| 3" | -0.01" to 0.01" | 0.0036" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 0000 |
| 4" | -0.01" to 0.01" | 0.0036" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 0000 |
| 5" | -0.01" to 0.01" | 0.0036" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 0000 |
| 6" | -0.01" to 0.01" | 0.0036" per ft. | Chamfered | Medium | Brinell 167 | 0000000 | 0000 |
| 9" | -0.01" to 0.01" | 0.0036" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 0000 |
| 12" | -0.01" to 0.01" | 0.0036" per ft. | Chamfered | Medium | Brinell 167 | 0000000 | 0000 |
| 18" | -0.01" to 0.01" | 0.0036" per ft. | Chamfered | Medium | Brinell 167 | 0000000 | 00000 |
| 24" | -0.01" to 0.01" | 0.0036" per ft. | Chamfered | Medium | Brinell 167 | 0000000 | 00000 |
| 36" | -0.01" to 0.01" | 0.0036" per ft. | Chamfered | Medium | Brinell 167 | 0000000 | 00000 |
| 48" | -0.01" to 0.01" | 0.0036" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 00000 |
5/16" Dia. (Tolerance: -0.0002" to 0") | |||||||
| 3" | -0.01" to 0.01" | 0.0048" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 0000 |
| 4" | -0.01" to 0.01" | 0.0048" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 0000 |
| 5" | -0.01" to 0.01" | 0.0048" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 0000 |
| 6" | -0.01" to 0.01" | 0.0048" per ft. | Chamfered | Medium | Brinell 167 | 0000000 | 0000 |
| 9" | -0.01" to 0.01" | 0.0048" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 0000 |
| 12" | -0.01" to 0.01" | 0.0048" per ft. | Chamfered | Medium | Brinell 167 | 0000000 | 00000 |
| 18" | -0.01" to 0.01" | 0.0048" per ft. | Chamfered | Medium | Brinell 167 | 0000000 | 00000 |
| 24" | -0.01" to 0.01" | 0.0048" per ft. | Chamfered | Medium | Brinell 167 | 0000000 | 00000 |
| 36" | -0.01" to 0.01" | 0.0048" per ft. | Chamfered | Medium | Brinell 167 | 0000000 | 00000 |
3/8" Dia. (Tolerance: -0.0002" to 0") | |||||||
| 12" | -0.01" to 0.01" | 0.0048" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 00000 |
| 18" | -0.01" to 0.01" | 0.0048" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 00000 |
| 24" | -0.01" to 0.01" | 0.0048" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 00000 |
| 36" | -0.01" to 0.01" | 0.0048" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 00000 |
| 48" | -0.01" to 0.01" | 0.0048" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 00000 |
1/2" Dia. (Tolerance: -0.0002" to 0") | |||||||
| 12" | -0.01" to 0.01" | 0.0048" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 00000 |
| 18" | -0.01" to 0.01" | 0.0048" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 00000 |
| 24" | -0.01" to 0.01" | 0.0048" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 00000 |
| 36" | -0.01" to 0.01" | 0.0048" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 00000 |
| 48" | -0.01" to 0.01" | 0.0048" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 00000 |
5/8" Dia. (Tolerance: -0.0004" to 0") | |||||||
| 12" | -0.01" to 0.01" | 0.0096" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 00000 |
| 18" | -0.01" to 0.01" | 0.0096" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 00000 |
| 24" | -0.01" to 0.01" | 0.0096" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 00000 |
| 36" | -0.01" to 0.01" | 0.0096" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 00000 |
| 48" | -0.01" to 0.01" | 0.0096" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 00000 |
3/4" Dia. (Tolerance: -0.0004" to 0") | |||||||
| 12" | -0.01" to 0.01" | 0.0096" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 00000 |
| 18" | -0.01" to 0.01" | 0.0096" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 00000 |
| 24" | -0.01" to 0.01" | 0.0096" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 00000 |
| 36" | -0.01" to 0.01" | 0.0096" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 00000 |
| 48" | -0.01" to 0.01" | 0.0096" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 000000 |
7/8" Dia. (Tolerance: -0.0004" to 0") | |||||||
| 12" | -0.01" to 0.01" | 0.0096" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 00000 |
| 18" | -0.01" to 0.01" | 0.0096" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 00000 |
| 24" | -0.01" to 0.01" | 0.0096" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 000000 |
| 36" | -0.01" to 0.01" | 0.0096" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 000000 |
1" Dia. (Tolerance: -0.0004" to 0") | |||||||
| 12" | -0.01" to 0.01" | 0.0096" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 00000 |
| 18" | -0.01" to 0.01" | 0.0096" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 00000 |
| 24" | -0.01" to 0.01" | 0.0096" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 000000 |
| 36" | -0.01" to 0.01" | 0.0096" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 000000 |
| 48" | -0.01" to 0.01" | 0.0096" per ft. | Chamfered | Medium | Brinell 167 | 00000000 | 000000 |
Metric—12L14 Carbon Steel | |||||||
3mm Dia. (Tolerance: -0.005mm to 0mm) | |||||||
| 50mm | -0.25mm to 0.25mm | 0.12 mm per 300 mm | Chamfered | Medium | Rockwell B83 | 00000000 | 0000 |
| 100mm | -0.25mm to 0.25mm | 0.12 mm per 300 mm | Chamfered | Medium | Rockwell B83 | 00000000 | 0000 |
| 200mm | -0.25mm to 0.25mm | 0.12 mm per 300 mm | Chamfered | Medium | Rockwell B83 | 00000000 | 0000 |
| 400mm | -0.25mm to 0.25mm | 0.12 mm per 300 mm | Chamfered | Medium | Rockwell B83 | 00000000 | 00000 |
4mm Dia. (Tolerance: -0.005mm to 0mm) | |||||||
| 50mm | -0.25mm to 0.25mm | 0.12 mm per 300 mm | Chamfered | Medium | Rockwell B83 | 00000000 | 0000 |
| 100mm | -0.25mm to 0.25mm | 0.12 mm per 300 mm | Chamfered | Medium | Rockwell B83 | 00000000 | 0000 |
| 200mm | -0.25mm to 0.25mm | 0.12 mm per 300 mm | Chamfered | Medium | Rockwell B83 | 00000000 | 0000 |
| 400mm | -0.25mm to 0.25mm | 0.12 mm per 300 mm | Chamfered | Medium | Rockwell B83 | 00000000 | 00000 |
5mm Dia. (Tolerance: -0.005mm to 0mm) | |||||||
| 50mm | -0.25mm to 0.25mm | 0.12 mm per 300 mm | Chamfered | Medium | Rockwell B83 | 00000000 | 0000 |
| 100mm | -0.25mm to 0.25mm | 0.12 mm per 300 mm | Chamfered | Medium | Rockwell B83 | 0000000 | 0000 |
| 200mm | -0.25mm to 0.25mm | 0.12 mm per 300 mm | Chamfered | Medium | Rockwell B83 | 00000000 | 0000 |
| 400mm | -0.25mm to 0.25mm | 0.12 mm per 300 mm | Chamfered | Medium | Rockwell B83 | 00000000 | 00000 |