Filter by
Material
System of Measurement
Hardness Rating
Tolerance Rating
Yield Strength
Mechanical Finish
Fabrication
Hardness
Maximum Hardness After Heat Treatment
Specifications Met
DFARS Specialty Metals
Appearance
REACH
RoHS
Edge Type
Heat Treatable
Shaft Motion
Elongation
About Carbon Steel, Alloy Steel, Spring Steel, and Cast Iron
More
About Shafts
More
Easy-to-Machine 1117 Carbon Steel
- Yield Strength: 58,000 psi
- Hardness: Rockwell B75 (Medium)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell B89
- Specifications Met: ASTM A108
1117 carbon steel responds to surface-hardening heat treatment better than other easy-to-machine carbon steels. Use these rods to fabricate shaft couplings, studs, pins, and universal joints.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Dia. | Dia. Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
| 1/4" | -0.002" to 0" | 0000000 | |||
| 5/16" | -0.002" to 0" | 0000000 | |||
| 3/8" | -0.002" to 0" | 0000000 | |||
| 1/2" | -0.002" to 0" | 0000000 | |||
| 9/16" | -0.002" to 0" | 0000000 | |||
| 5/8" | -0.002" to 0" | 0000000 | |||
| 3/4" | -0.002" to 0" | 0000000 | |||
| 7/8" | -0.002" to 0" | 0000000 | |||
| 1" | -0.002" to 0" | 0000000 | |||
| 1 1/8" | -0.002" to 0" | 0000000 | |||
| 1 1/4" | -0.002" to 0" | 0000000 | |||
| 1 1/2" | -0.002" to 0" | 0000000 | |||
| 1 5/8" | -0.003" to 0" | 0000000 | |||
| 1 3/4" | -0.003" to 0" | 0000000 | |||
| 2" | -0.003" to 0" | 0000000 | |||
| 2 1/8" | -0.003" to 0" | 0000000 | |||
| 2 1/4" | -0.003" to 0" | 0000000 | |||
| 2 1/2" | -0.003" to 0" | 0000000 |
Threaded Rotary Shafts
Threaded End × Straight End
Attach threaded accessories, such as mixer propellers and fan blades, to the end of these shafts. The edges are chamfered to remove sharp corners, reducing damage to bearings, housings, and other components during installation. All are turned, ground, and polished to tight diameter and straightness tolerances. Made of carbon steel, these shafts balance high strength and good machinability, making them ideal for general purpose use.
For technical drawings and 3-D models, click on a part number.
Threaded End | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Lg. Tolerance | Size | Lg. | Step Lg. | Straightness Tolerance | Edge Type | Hardness Rating | Hardness | Each | |
Inch—1117 Carbon Steel | ||||||||||
1/4" Dia. (Tolerance: -0.0002" to 0") | ||||||||||
| 6" | -0.125" to 0.125" | 10-32 | 3/8" | 7/16" | 0.0048" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 000000 |
| 6" | -0.125" to 0.125" | 1/4"-20 | 1/2" | __ | 0.0048" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 12" | -0.125" to 0.125" | 10-32 | 3/8" | 7/16" | 0.0048" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 12" | -0.125" to 0.125" | 1/4"-20 | 1/2" | __ | 0.0048" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 24" | -0.125" to 0.125" | 10-32 | 3/8" | 7/16" | 0.0048" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 24" | -0.125" to 0.125" | 1/4"-20 | 1/2" | __ | 0.0048" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
1/2" Dia. (Tolerance: -0.0002" to 0") | ||||||||||
| 6" | -0.125" to 0.125" | 3/8"-16 | 3/4" | 7/8" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 6" | -0.125" to 0.125" | 1/2"-13 | 1" | __ | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 12" | -0.125" to 0.125" | 3/8"-16 | 3/4" | 7/8" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 12" | -0.125" to 0.125" | 1/2"-13 | 1" | __ | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 24" | -0.125" to 0.125" | 3/8"-16 | 3/4" | 7/8" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 24" | -0.125" to 0.125" | 1/2"-13 | 1" | __ | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
3/4" Dia. (Tolerance: -0.0004" to 0") | ||||||||||
| 6" | -0.125" to 0.125" | 1/2"-13 | 1" | 1 5/32" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 6" | -0.125" to 0.125" | 3/4"-10 | 1 1/2" | __ | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 12" | -0.125" to 0.125" | 1/2"-13 | 1" | 1 5/32" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 12" | -0.125" to 0.125" | 3/4"-10 | 1 1/2" | __ | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 24" | -0.125" to 0.125" | 1/2"-13 | 1" | 1 5/32" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 24" | -0.125" to 0.125" | 3/4"-10 | 1 1/2" | __ | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
1" Dia. (Tolerance: -0.0004" to 0") | ||||||||||
| 6" | -0.125" to 0.125" | 5/8"-11 | 1 1/4" | 1 7/16" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 6" | -0.125" to 0.125" | 1"-8 | 2" | __ | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 12" | -0.125" to 0.125" | 5/8"-11 | 1 1/4" | 1 7/16" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 12" | -0.125" to 0.125" | 1"-8 | 2" | __ | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 24" | -0.125" to 0.125" | 5/8"-11 | 1 1/4" | 1 7/16" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 24" | -0.125" to 0.125" | 1"-8 | 2" | __ | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
Tapped Rotary Shafts
Straight End x Tapped End
Connect these internally threaded shafts directly to threaded components, or use a fastener to secure. The edges are chamfered to remove sharp corners, reducing damage to bearings, housings, and other components during installation. All are turned, ground, and polished to tight diameter and straightness tolerances. Made of carbon steel, these shafts balance high strength and good machinability, making them ideal for general purpose use.
For technical drawings and 3-D models, click on a part number.
Tapped End | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Lg. Tolerance | Thread Size | Thread Lg. | Straightness Tolerance | Edge Type | Hardness Rating | Hardness | Each | |
Inch—1117 Carbon Steel | |||||||||
3/8" Dia. (Tolerance: -0.0002" to 0") | |||||||||
| 6" | -0.125" to 0.125" | 10-32 | 3/8" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 000000 |
| 6" | -0.125" to 0.125" | 1/4"-20 | 1/2" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 12" | -0.125" to 0.125" | 10-32 | 3/8" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 12" | -0.125" to 0.125" | 1/4"-20 | 1/2" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 24" | -0.125" to 0.125" | 10-32 | 3/8" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 24" | -0.125" to 0.125" | 1/4"-20 | 1/2" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
1/2" Dia. (Tolerance: -0.0002" to 0") | |||||||||
| 6" | -0.125" to 0.125" | 1/4"-20 | 1/2" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 6" | -0.125" to 0.125" | 3/8"-16 | 3/4" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 12" | -0.125" to 0.125" | 1/4"-20 | 1/2" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 12" | -0.125" to 0.125" | 3/8"-16 | 3/4" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 24" | -0.125" to 0.125" | 1/4"-20 | 1/2" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 24" | -0.125" to 0.125" | 3/8"-16 | 3/4" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
3/4" Dia. (Tolerance: -0.0004" to 0") | |||||||||
| 6" | -0.125" to 0.125" | 1/4"-20 | 1/2" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 6" | -0.125" to 0.125" | 3/8"-16 | 3/4" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 12" | -0.125" to 0.125" | 1/4"-20 | 1/2" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 12" | -0.125" to 0.125" | 3/8"-16 | 3/4" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 24" | -0.125" to 0.125" | 1/4"-20 | 1/2" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 24" | -0.125" to 0.125" | 3/8"-16 | 3/4" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
1" Dia. (Tolerance: -0.0004" to 0") | |||||||||
| 6" | -0.125" to 0.125" | 3/8"-16 | 3/4" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 6" | -0.125" to 0.125" | 1/2"-13 | 1" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 6" | -0.125" to 0.125" | 5/8"-18 | 1 1/4" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 12" | -0.125" to 0.125" | 3/8"-16 | 3/4" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 12" | -0.125" to 0.125" | 1/2"-13 | 1" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 12" | -0.125" to 0.125" | 5/8"-18 | 1 1/4" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 00000 |
| 24" | -0.125" to 0.125" | 3/8"-16 | 3/4" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 000000 |
| 24" | -0.125" to 0.125" | 1/2"-13 | 1" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 000000 |
| 24" | -0.125" to 0.125" | 5/8"-18 | 1 1/4" | 0.0072" per ft. | Chamfered | Medium | Rockwell B75 | 0000000 | 000000 |