Faster and easier to reposition than articulating-arm lights, these gooseneck-arm lights attach to your workspace for additional lighting. They're more rugged than office desk lamps. All are furnished with LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a warm light appearance that casts a yellow tone similar to incandescent lights.

These lights cast a narrower beam than other gooseneck-arm machine lights. Reposition them faster and more easily than articulating-arm lights. They have a durable glass lens that's sealed to keep out fluids, chips, and shavings, so they can be mounted directly inside machines. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. They produce a cool or daylight appearance that highlights white/blue tones, which is good for inspecting.

IP65 lights are dust tight and protect against low-pressure washdowns, such as water from a garden hose. IP67 lights withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they are built tougher than needed for machine environments.

Bases allow you to convert Style A lights with a 24" arm reach and Style C lights from a fastener mount to a clamp-on or magnetic mount.

Power supplies, also known as transformers, convert your facility's 120 or 240 AC voltage into 24V DC voltage.

Gooseneck arms can be repositioned faster and more easily than articulating arms. Mount these lights directly inside machines—they have a heat- and chemical-resistant glass lens that's sealed to keep out fluids, chips, and shavings. They’re rated IP67 to withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they are built tougher than needed for machine environments. These lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light appearance that highlights white/blue tones, which is good for inspecting.

Power supplies, also known as transformers, are for use on the hardwire lights to convert your facility's 120 or 240 AC voltage into 24 DC voltage. They cannot be sold to California or Vermont due to local energy efficiency requirements.

Though not as bright as our miniature fiber-optic lights, these lights have built-in LEDs that last longer, are more efficient, and are more affordable. Use them to illuminate small and microscopic parts. They have a daylight appearance that highlights white/blue tones, which is good for inspecting.

Compared to other dock lights that can only adjust vertically and horizontally, these lights bend at any angle to direct light exactly where it's needed. They have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. These lights emit a neutral white light often found in workspaces.

For technical drawings and 3-D models, click on a part number.

Shine light into hard-to-reach spaces with these flexible-arm flashlights. All have a long-lasting, built-in LED that is more efficient and generates less heat than other light technologies. These flashlights cast a flood beam that creates a uniform spread of light. This is especially good for close-up tasks and inspection work. Use the momentary light setting when you need light for brief periods—the light only turns on when the button is held down. Rated IP04, they withstand liquid splashed from all angles. Their body is knurled for a nonslip grip. All lights meet ANSI/Plato FL 1, so you'll know they meet performance standards for impact resistance, run time, and beam distance.

Clip these little flashlights to a baseball cap or a surface to light up your work. They cast a flood beam with a uniform spread of light that’s ideal for close-up tasks.

Styles A-D can clip onto the brim of a hat. These flashlights are also tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Style C have a gooseneck arm to direct light where you need it. This makes them a good fit for pockets and clipboards.

The red beam lets you see in low light without disrupting your night vision.

IP04- and IP54-rated flashlights are sealed to keep out dripping, splashing, and falling liquids, as well as humidity.

Shine light into hard-to-reach spaces in extreme environments like oil refineries or chemical plants. These flashlights are intrinsically safe, so they won’t spark. They meet NEC standards to reduce the risk of explosions. Make sure they match the hazardous environmental rating of your facility—they’re rated NEC Class I, Division I Groups A, B, C, and D. They’re also rated IP04, so they’ll seal out humidity and liquid from all angles.

Shine them continuously or use the momentary light setting to shine the light only while holding down the button. You’ll keep a firm grip on these lights thanks to their knurled texture.

Flashlights that meet ANSI/Plato FL 1 are tested to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Clip these headlamps right into a mount on your tactical or rescue helmet. You can also clip them onto your gear’s MOLLE strap. These headlamps all have multiple LED color options for different scenarios. Use the red or blue beam in low-light environments to preserve your night vision. The blue beam lets you see more details and color differences than the red beam—you can even read. The green beam shows more contrast than red and blue beams, but it can interfere with your ability to see in dark conditions. Meeting ANSI/Plato F1, these lights have been tested for light output, impact resistance, and run time.

Style A are best for close-up tasks and inspection work—they produce a flood beam with an even spread of light. Direct the light where you need it with the bendable arm. You can program the order the beam colors appear with each push of the button based on your preference. Rated IP04, these headlamps are sealed to keep out dripping, splashing, and falling liquids, as well as humidity. They include common helmet mount adapters such as ARC, M-LOK, MICH, Picatinny, and ABR.

Style B are best for lighting up long distances where water is a concern. Our most water-resistant option, they’re rated IP08 to handle prolonged submersion. Their spot beam has a bright center to illuminate faraway objects. When wearing night-vision goggles, switch these headlamps to infrared light to see clear, crisp images in dim light or pitch black. You can also program the order that the beam colors appear with each push of a button based on your preference. Bend the arm to direct light where you need it. To keep them from turning on accidentally, they have a digital lockout option. These headlamps include common helmet mount adapters such as ARC, M-LOK, MICH, Picatinny, and ABR.

Bend the lamp and magnifying lens to any position—they’re mounted on separate arms for a flexible, hands-free setup. These magnifiers have a weighted base that holds them in place while you inspect parts, record observations, and make repairs with both hands. Peer through the bifocal lens to view parts at four times their size. Or angle the lamp to spot issues that are difficult to detect under overhead light, such as surface scratches or soldering defects.

Inspect dim or dark areas with these illuminated mirrors.

Incandescent mirrors have a thumb wheel on the handle to adjust the mirror angle up to 90°.

Optional direct reflection mirror snaps onto incandescent mirrors for a wider field of view.

Perform hands-free inspections in dimly lit areas—these mirrors have a base that mounts to any magnetic surface and built-in LEDs to illuminate workpieces. Use them to check hard-to-see spots on parts and equipment for wear, damage, and defects. The arm pivots 360° and is more rigid than flexible arms, so it holds steady even when there’s vibration.