About Glove Sizing
More
About Cut-Resistant Gloves
More
Coated Cut-Protection Gloves
The coating on these gloves provides extra protection and wear resistance. All meet the ANSI/ISEA 105 standard, which designates levels of cut resistance based on the force needed to cut through the material of the glove using a razor blade.
Kevlar aramid gloves absorb moisture. Dyneema gloves are thinner, more breathable, and more form fitting than Kevlar gloves.
Palm-coated gloves have an uncoated back side that makes the gloves more comfortable and breathable. Fully coated gloves provide the same protection for the front and back of the hand.
Nitrile-coated gloves are oil resistant and have better abrasion resistance than other coated gloves. Polyurethane-coated gloves offer good tactility for precision handling and delicate tasks.
Style A provide cut protection without hindering dexterity. They are textured to provide added grip. For a secure fit, they have a knit cuff.
Style C are suitable for working with oily heavy metal parts with sharp, rough edges. They have a smooth surface. Open cuffs make them convenient to put on and take off.
Available Sizes | |
|---|---|
| Size | Glove Size |
| S | 7 |
| M | 8 |
| L | 9 |
| XL | 10 |
| 2XL | 11 |
Coating | Pair | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Cut Resistance | Texture | Material | Coverage | Lg. | Cuff Style | Color | Specifications Met | Choose a Size | 1-11 | 12-Up | |
Style A | |||||||||||
Dyneema Fabric | |||||||||||
| ANSI Level A3 | Textured | Polyurethane Rubber | Palm | 10" | Knit | Black/Gray | ANSI/ISEA 105 | 000000 | 000000 | 000000 | |
Style C | |||||||||||
Kevlar Aramid Fabric | |||||||||||
| ANSI Level A3 | Smooth | Nitrile Rubber | Full | 11" | Open | Black | ANSI/ISEA 105 | 00000000 | 00000 | 00000 | |
Cut-Protection Gloves
These gloves meet the ANSI/ISEA 105 standard, which designates levels of cut resistance based on the force needed to cut through the material of the glove using a razor blade. They are made from kevlar aramid, so they absorb moisture. Knit cuffs provide a secure fit.
Style B gloves have raised dots on both sides for a secure grip in wet and oily conditions. Gloves are ambidextrous and can be worn on either hand for convenience or to extend use when the grip on one side wears down.
Available Sizes | |
|---|---|
| Size | Glove Size |
| XS | 6 |
| S | 7 |
| M | 8 |
| L | 9 |
| XL | 10 |
Grip | Pair | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Cut Resistance | Texture | Coverage | Pattern | Lg. | Cuff Style | Color | Specifications Met | Choose a Size | 1-11 | 12-Up | |
Gloves | ||||||||||||
Kevlar Aramid Fabric | ||||||||||||
| A | ANSI Level A3 | __ | __ | __ | 9 1/2" | Knit | Yellow | ANSI/ISEA 105 | 0000000 | 00000 | 00000 | |
PVC-Plastic Grip Kevlar Aramid Fabric | ||||||||||||
| B | ANSI Level A3 | Textured | Full | Dot | 9 1/2" | Knit | Yellow | ANSI/ISEA 105 | 0000000 | 0000 | 0000 | |
Heat- and Cut-Protection Gloves
Protect your hands from intermittent handling of hot objects. All of these gloves meet the ANSI/ISEA 105 standard, which designates levels of cut resistance based on the force needed to cut through the material of the glove using a razor blade. Holding heavy objects may decrease temperature rating.
Nitrile-coated cotton and Kevlar/cotton terry gloves provide a good grip on oily surfaces.
Oil- and Cut-Protection Gloves
Often used on machine assembly jobs where protection against oil and cuts is essential, these gloves are thin enough for precision work. They resist tearing and degradation from oil and grease. All of these gloves meet the ANSI/ISEA 105 standard, which designates levels of cut resistance based on the force needed to cut through the material of the glove using a razor blade.
Gloves with open cuffs are more convenient to put on and take off than other gloves.