The accordion design prevents the sleeve from collapsing and allows more air circulation. For applications that require frequent glove changes, the sleeves stay connected to the glove box so you can quickly change the size or type of glove being used. Use these gloves in glove boxes to safely handle hazardous substances or avoid contaminating sensitive materials. They fit 8" diameter glove box access holes. Attach gloves to sleeves using the included sleeve-to-glove connecting spring clamp and sleeve-to-glove connecting ring clamp. Attach sleeves to a glove box using glove box mounting clamps (sold separately).

Latex gloves offer the most dexterity of the glove box gloves we carry. They have moderate chemical resistance.

Nitrile gloves have good resistance to punctures, solvents, oils, and greases.

These gloves provide the protection you need when working in abrasive blasting cabinets.

More flexible and portable than glove boxes, these glove bags are temporary enclosures that protect you while you work with hazardous or unknown material and isolate the material from outside air and moisture. They come with built-in gloves to shield your hands and prevent hand oils from getting inside. All have one or two zipper openings for depositing material and equipment. They collapse for storage and are sturdy enough to be used again, but replace them if they become contaminated.

Polyethylene bags have a tubing connector for inflating them with a gas supply. They come with polyethylene gloves, which resist ozone and many oxidizing chemicals. For extra protection, there are also cotton liner gloves.

PVC bags have a support frame for assembling them. To fill them with inert gas, use their barbed gas port fitting. They come with butyl gloves, which have excellent resistance to chemicals, vapors, and gases.

Safely handle hazardous and sensitive material in an enclosed space that keeps out air and moisture. These boxes have built-in gloves for protecting your hands and a viewing window for seeing your work. Position them on any flat work surface.

Use boxes with gas port fittings to exhaust the gas within and replace it with a different gas that works for your application.

Polyethylene boxes are lightweight, so they’re easy to move around your facility. They have a side door for inserting material and equipment.

Steel boxes are durable and stand up to frequent use. To deposit material and equipment without letting in air and moisture, they have a side chamber with one interior and one exterior door. There’s also a front door in case you need a bigger opening. Use the included humidity meter to make sure that sensitive material isn’t exposed to too much moisture.

Not for use with silica sand, steel shot, baking soda, and plastic grit.

Cabinet with a dust collector has a safety switch that shuts off airflow when the cabinet door is opened. The dust collector removes dust from the cabinet.

Cabinet without a dust collector can be hooked up to dust collector (sold separately) or a shop vacuum using the cabinet's 2 1/4" port.

Lift the front door to load and remove parts. A dust collector removes dust from inside the cabinet. Not for use with silica sand, steel shot, baking soda, and plastic grit.