Keep personnel safe from electric shock by adding ground fault protection. Also known as hospital-grade receptacles, these have an extra-tight fit when mated with plugs to remain secure in high-vibration environments.

For technical drawings and 3-D models, click on a part number.

All connectors have a multiple-ring seal and rubber housing to keep out liquid. They resist heat, oil, and chemicals. When mated, connectors meet NEMA 6P, NEMA 12, and either IP67 or IP69K.

Connectors that meet IP67 resist temporary submersion.

Receptacles with GFCI keep personnel safe from electric shock.

Note: The current rating of your plug should not exceed that of your socket or receptacle.

For technical drawings and 3-D models, click on a part number.

Keep personnel safe from electric shock by adding ground fault protection. Receptacles mount to DIN rail so you can bring power closer to where you need it. The housing is impact-resistant plastic.

For technical drawings and 3-D models, click on a part number.

When mated, connectors meet NEMA 6P for protection against corrosion and washdowns. All have a multiple-ring seal and rubber housing to keep out liquid. They resist heat, oil, and chemicals. A quarter turn locks them in place to remain secure in high-vibration applications and prevent accidental disconnection.

Receptacles with GFCI keep personnel safe from electric shock.

For technical drawings and 3-D models, click on a part number.

Hardwire one of these converters to an extension cord to keep personnel safe from electric shock.

Converters with automatic GFCI reset immediately regain power after ground is established.

Converters with manual GFCI reset prevent unexpected start-up.

Prevent electric shocks from extension cords connected to boats, RVs, and other large electrical systems. These ELCI (equipment leakage circuit interrupters) converters monitor the flow of current to and from an electrical system. If they detect an imbalance, they cut off the power. They’re similar to GFCI converters, but they monitor an entire system rather than one device. They also tolerate a higher level of imbalance before they trip. These converters have a manual reset to keep equipment from starting unexpectedly.

Keep personnel safe from electric shock with ground fault protection.

90° elbow plugs fit flush against a wall outlet, so they fit behind machinery or in areas where space is tight.

Outlet strips with a circuit breaker prevent damage from current overload and short circuits.

Flip-down covers protect outlets from dust when not in use.

Outlet strips with a manual reset prevent equipment from starting up unexpectedly after ground is established. Strips with an automatic reset immediately regain power after ground is established.

Turn a single outlet into five outlets with ground fault protection to minimize the risk of electric shock. These splitters automatically reset to regain power after ground is established.

For technical drawings and 3-D models, click on a part number.

Minimize the risk of electric shock by adding ground fault protection to standard outlets.

Automatic reset adapters automatically regain power after ground is established.

Manual reset adapters prevent unexpected equipment start-up.

For technical drawings and 3-D models, click on a part number.