DIN-Rail Mount Interface Relays
Prevent damage from voltage spikes, reduce signal interference, and amplify signal with these relays, which interface between your controller and components to isolate input and output circuits. They mount on 35 mm DIN rail (also known as DIN 3 rail) for fast installation.
Relays with spring-clamp terminals connect and disconnect to wires without needing to turn screws. Insert a slotted screwdriver into the wire-release slot to free the spring clamp holding the wire in place.
For technical drawings and 3-D models, click on a part number.
Relays with Relay Sockets | Replacement Relays | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Number of Terminals | Input Voltage  | Control Current, mA | Switching Current @ 240V AC | hp @ Switching Voltage | Ht. | Wd. | Dp. | Each | Each | ||
1 Circuit Controlled with 1 Off (Normally Open) or 1 On (Normally Closed)—SPDT | |||||||||||
With Screw-Clamp Terminals | |||||||||||
| 5 | 24V AC | 45 | 16A | 1/3 hp @ 120 V AC | 3.3" | 0.6" | 2.7" | 0000000 | 000000 | 0000000 | 000000 |
| 5 | 120V AC | 8 | 16A | 1/3 hp @ 120 V AC | 3.3" | 0.6" | 2.7" | 0000000 | 00000 | 0000000 | 00000 |
| 5 | 240V AC | 3 | 6A | __ | 3.5" | 0.2" | 3" | 0000000 | 00000 | 0000000 | 0000 |
| 5 | 240V AC | 3.5 | 16A | 1/4 hp @ 120 V AC | 3.5" | 0.6" | 3" | 0000000 | 00000 | 0000000 | 0000 |
| 5 | 12V AC, 12V DC | 16 | 6A | __ | 3.5" | 0.2" | 3" | 0000000 | 00000 | 0000000 | 0000 |
| 5 | 24V AC, 24V DC | 12 | 6A | __ | 3.5" | 0.2" | 3" | 0000000 | 00000 | 0000000 | 0000 |
| 5 | 120V AC, 120V DC | 5 | 6A | __ | 3.5" | 0.2" | 3" | 0000000 | 00000 | 0000000 | 0000 |
| 5 | 12V DC | 41 | 16A | 1/4 hp @ 120 V AC | 3.5" | 0.6" | 3" | 0000000 | 00000 | 0000000 | 0000 |
| 5 | 24V DC | 20 | 16A | 1/3 hp @ 120 V AC | 3.3" | 0.6" | 2.7" | 0000000 | 00000 | 0000000 | 0000 |
With Spring-Clamp Terminals | |||||||||||
| 5 | 12V AC, 12V DC | 16 | 6A | __ | 3.7" | 0.2" | 3" | 0000000 | 00000 | 0000000 | 0000 |
| 5 | 24V AC, 24V DC | 12 | 6A | __ | 3.7" | 0.2" | 3" | 0000000 | 00000 | 0000000 | 0000 |
| 5 | 120V AC, 120V DC | 5 | 6A | __ | 3.7" | 0.2" | 3" | 0000000 | 00000 | 0000000 | 0000 |
2 Circuits Controlled with 2 Off (Normally Open) or 2 On (Normally Closed)—DPDT | |||||||||||
With Screw-Clamp Terminals | |||||||||||
| 8 | 24V AC | 45 | 8A | 1/4 hp @ 120 V AC | 3.3" | 0.6" | 2.7" | 0000000 | 00000 | 0000000 | 00000 |
| 8 | 120V AC | 8 | 8A | 1/4 hp @ 120 V AC | 3.3" | 0.6" | 2.7" | 0000000 | 00000 | 0000000 | 00000 |
| 8 | 120V AC, 120V DC | 4.5 | 8A | 1/2 hp @ 120 V AC | 3.5" | 0.6" | 3" | 0000000 | 00000 | 0000000 | 0000 |
| 8 | 240V AC, 240V DC | 5 | 8A | 1/2 hp @ 120 V AC | 3.5" | 0.6" | 3" | 0000000 | 00000 | 0000000 | 0000 |
| 8 | 24V DC | 20 | 8A | 1/4 hp @ 120 V AC | 3.3" | 0.6" | 2.7" | 0000000 | 00000 | 0000000 | 0000 |
DIN-Rail Mount Solid State Interface Relays
With no moving parts, these solid state relays last longer, switch faster, and are quieter than mechanical relays. They interface between your controller and components to isolate input and output circuits, which protects components from voltage spikes, amplifies the relay’s signal, and reduces interference for reliable transmission. The included relay socket mounts on 35 mm DIN rail (also known as DIN 3 rail) for fast installation. Relays disconnect from the socket for easy replacement. Rated IP20, they prevent fingers and other objects from touching live circuits.
Relays with Relay Sockets | Replacement Relays | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Number of Terminals | Input Voltage | Output Voltage | Control Current | Switching Current @ Voltage | Max. Switching Voltage | Ht. | Wd. | Dp. | Each | Each | ||
1 Circuit Controlled with 1 Off (Normally Open)—SPST-NO | ||||||||||||
| 4 | 120V AC, 120V DC | __ | 5.5mA | 2 A @ 240 V AC | 275V AC | 3.5" | 0.2" | 3" | 0000000 | 000000 | 0000000 | 000000 |
| 4 | 120V AC, 120V DC | __ | 5.5mA | 6 A @ 24 V DC | 33V DC | 3.5" | 0.2" | 3" | 0000000 | 00000 | 0000000 | 00000 |
| 4 | 24V DC | __ | 10.5mA | 2 A @ 240 V AC | 275V AC | 3.5" | 0.2" | 3" | 0000000 | 00000 | 0000000 | 00000 |
| 5 | 24V AC, 48V AC, 120V AC, 240V AC, 24V DC, 48V DC, 60V DC, 120V DC, 240V DC | 0-48V DC | 100mA | 100 mA @ 48 V DC | 48V DC | 3.5" | 0.2" | 3.4" | 0000000 | 00000 | 0000000 | 00000 |
| 5 | 24V AC, 48V AC, 120V AC, 240V AC, 24V DC, 48V DC, 60V DC, 120V DC, 240V DC | __ | 3.5A | 3.5 A @ 30 V DC | 30V DC | 3.5" | 0.5" | 3.4" | 0000000 | 00000 | 0000000 | 00000 |
| 5 | 24V DC | __ | 8.5mA | 3 A @ 30 V DC | 33V DC | 3.1" | 0.2" | 3.6" | 0000000 | 00000 | 000000 | 00 |
| 5 | 24V DC | 3-48V DC | 100mA | 100 mA @ 48 V DC | 48V DC | 3.1" | 0.2" | 3.7" | 0000000 | 00000 | 000000 | 00 |
DIN-Rail Mount Solid State Relays
Unlike mechanical relays, these solid state relays have no moving parts, so they require less maintenance and last longer, switch faster, and are quieter. They mount on 35 mm DIN rail (also known as DIN 3) for fast installation. An LED indicator lights up when these relays are connected, so you can quickly confirm that they’re wired correctly. IP20 rated, their terminals are recessed, so they prevent fingers and other objects from touching live circuits.
Relays with an integrated heat sink disperse heat to increase the relay’s current rating.
For technical drawings and 3-D models, click on a part number.
| Number of Terminals | Input Voltage | Control Current, mA | Switching Current @ Voltage (Load Type) | Max. Switching Voltage | Ht. | Wd. | Dp. | Features | Each | |
1 Circuit Controlled with 1 Off (Normally Open)—SPST-NO | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Single Phase | ||||||||||
| 4 | 90V AC, 120V AC, 240V AC, 280V AC | 12 | 4.5 A @ 24 V AC (Full Load) 8 A @ 24 V AC (Resistive Load) 10 A @ 24 V AC | 280V AC | 3.54" | 0.69" | 2.56" | Integrated Heat Sink, LED Indicator | 0000000 | 0000000 |
| 4 | 4V DC, 6V DC, 12V DC, 24V DC, 30V DC | 12 | 4.5 A @ 24 V AC (Full Load) 8 A @ 24 V AC (Resistive Load) 15 A @ 3 V DC | 50V DC | 3.54" | 0.69" | 2.56" | Integrated Heat Sink, LED Indicator | 0000000 | 000000 |
Spade-Terminal Relays
Spring-Clamp
Terminals
Using a low-current signal, these relays are often used to control small motors and heaters. These relays attach to quick-disconnect terminals.
Surface-mount relays have a slot on the flange for mounting them to flat surfaces. Relay-socket mount relays plug into a socket (sold separately).
Relay sockets mount directly on 35 mm DIN rail (also known as DIN 3 rail) for fast installation. Relay sockets with screw terminals can also mount to a flat surface. Relay sockets with spring-clamp terminals connect and disconnect to wires without needing to turn screws. Insert a slotted screwdriver into the wire-release slot to free the spring clamp holding the wire in place.
For technical drawings and 3-D models, click on a part number.
Relays | Relay Sockets with Screw Terminals | Relay Sockets with Spring-Clamp Terminals | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Number of Terminals | Input Voltage | Control Current, mA | Switching Current @ Voltage | Maximum Switching Voltage | Ht. | Wd. | Dp. | Quick-Disconnect Tab Wd. | Each | Each | Each | |||
1 Circuit Controlled with 1 Off (Normally Open) or 1 On (Normally Closed)—SPDT | ||||||||||||||
Relay-Socket Mount | ||||||||||||||
| 5 | 24V AC | 44 | 10 A @ 120 V AC/24 V DC | 380V AC | 1.1" | 0.5" | 1.4" | 0.187" | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 |
| 5 | 120V AC | 8 | 10 A @ 120 V AC/24 V DC | 380V AC | 1.1" | 0.5" | 1.4" | 0.187" | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
| 5 | 240V AC | 4 | 10 A @ 120 V AC/24 V DC | 380V AC | 1.1" | 0.5" | 1.4" | 0.187" | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 0000 |
| 5 | 6V DC | 87 | 10 A @ 120 V AC/24 V DC | 380V AC | 1.1" | 0.5" | 1.4" | 0.187" | 0000000 | 0000 | 0000000 | 0000 | 0000000 | 0000 |
| 5 | 12V DC | 43 | 10 A @ 120 V AC/24 V DC | 380V AC | 1.1" | 0.5" | 1.4" | 0.187" | 0000000 | 0000 | 0000000 | 0000 | 0000000 | 0000 |
| 5 | 24V DC | 22 | 10 A @ 120 V AC/24 V DC | 380V AC | 1.1" | 0.5" | 1.4" | 0.187" | 0000000 | 0000 | 0000000 | 0000 | 0000000 | 0000 |
| 5 | 48V DC | 11 | 10 A @ 120 V AC/24 V DC | 380V AC | 1.1" | 0.5" | 1.4" | 0.187" | 0000000 | 0000 | 0000000 | 0000 | 0000000 | 0000 |
| 8 | 24V AC | 46 | 15 A @ 120 V AC/24 V DC | 250V AC | 1.1" | 0.9" | 1.6" | 0.197" | 00000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
| 8 | 120V AC | 9 | 15 A @ 120 V AC/24 V DC | 250V AC | 1.1" | 0.9" | 1.6" | 0.197" | 00000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
| 8 | 24V DC | 37 | 15 A @ 120 V AC/24 V DC | 250V AC | 1.1" | 0.9" | 1.6" | 0.197" | 00000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
Surface Mount | ||||||||||||||
| 5 | 24V AC | 37 | 10 A @ 120 V AC/24 V DC | 380V AC | 0.6" | 1.8" | 1.16" | 0.187" | 0000000 | 00000 | 000000 | 00 | 000000 | 00 |
| 5 | 120V AC | 7 | 10 A @ 120 V AC/24 V DC | 380V AC | 0.6" | 1.8" | 1.16" | 0.187" | 0000000 | 00000 | 000000 | 00 | 000000 | 00 |
| 5 | 24V DC | 21 | 10 A @ 120 V AC/24 V DC | 380V AC | 0.6" | 1.8" | 1.16" | 0.187" | 0000000 | 0000 | 000000 | 00 | 000000 | 00 |
2 Circuits Controlled with 2 Off (Normally Open) or 2 On (Normally Closed)—DPDT | ||||||||||||||
Relay-Socket Mount | ||||||||||||||
| 8 | 24V AC | 44 | 5 A @ 120 V AC/24 V DC | 380V AC | 1.1" | 0.5" | 1.4" | 0.098" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
| 8 | 24V AC | 50 | 10 A @ 120 V AC/24 V DC | 300V AC | 1.1" | 0.9" | 1.6" | 0.11" | 000000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
| 8 | 24V AC | 50 | 15 A @ 120 V AC 12 A @ 24 V DC | 300V AC | 1.1" | 0.9" | 1.6" | 0.187" | 00000000 | 00000 | 0000000 | 0000 | 000000 | 00 |
| 8 | 120V AC | 8 | 5 A @ 120 V AC/24 V DC | 380V AC | 1.1" | 0.5" | 1.4" | 0.098" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
| 8 | 120V AC | 10 | 10 A @ 120 V AC/24 V DC | 300V AC | 1.1" | 0.9" | 1.6" | 0.11" | 000000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
| 8 | 120V AC | 10 | 15 A @ 120 V AC 12 A @ 24 V DC | 300V AC | 1.1" | 0.9" | 1.6" | 0.187" | 00000000 | 00000 | 0000000 | 0000 | 000000 | 00 |
| 8 | 240V AC | 4 | 5 A @ 120 V AC/24 V DC | 380V AC | 1.1" | 0.5" | 1.4" | 0.098" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
| 8 | 240V AC | 5 | 10 A @ 120 V AC/24 V DC | 300V AC | 1.1" | 0.9" | 1.6" | 0.11" | 000000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
| 8 | 240V AC | 5 | 15 A @ 120 V AC 12 A @ 24 V DC | 300V AC | 1.1" | 0.9" | 1.6" | 0.187" | 00000000 | 00000 | 0000000 | 0000 | 000000 | 00 |
| 8 | 6V DC | 87 | 5 A @ 120 V AC/24 V DC | 380V AC | 1.1" | 0.5" | 1.4" | 0.098" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
| 8 | 12V DC | 43 | 5 A @ 120 V AC/24 V DC | 380V AC | 1.1" | 0.5" | 1.4" | 0.098" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
| 8 | 12V DC | 75 | 15 A @ 120 V AC 12 A @ 24 V DC | 300V AC | 1.1" | 0.9" | 1.6" | 0.187" | 00000000 | 00000 | 0000000 | 0000 | 000000 | 00 |
| 8 | 12V DC | 92 | 10 A @ 120 V AC/24 V DC | 300V AC | 1.1" | 0.9" | 1.6" | 0.11" | 000000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
| 8 | 24V DC | 22 | 5 A @ 120 V AC/24 V DC | 380V AC | 1.1" | 0.5" | 1.4" | 0.098" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
| 8 | 24V DC | 38 | 15 A @ 120 V AC 12 A @ 24 V DC | 300V AC | 1.1" | 0.9" | 1.6" | 0.187" | 00000000 | 00000 | 0000000 | 0000 | 000000 | 00 |
| 8 | 24V DC | 46 | 10 A @ 120 V AC/24 V DC | 300V AC | 1.1" | 0.9" | 1.6" | 0.11" | 000000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
3 Circuits Controlled with 3 Off (Normally Open) or 3 On (Normally Closed)—3PDT | ||||||||||||||
Relay-Socket Mount | ||||||||||||||
| 11 | 24V AC | 63 | 15 A @ 120 V AC 12 A @ 24 V DC | 300V AC | 1.1" | 1.2" | 1.6" | 0.187" | 00000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
| 11 | 120V AC | 13 | 15 A @ 120 V AC 12 A @ 24 V DC | 300V AC | 1.1" | 1.2" | 1.6" | 0.187" | 00000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
| 11 | 240V AC | 6 | 15 A @ 120 V AC 12 A @ 24 V DC | 300V AC | 1.1" | 1.2" | 1.6" | 0.187" | 00000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
| 11 | 12V DC | 117 | 15 A @ 120 V AC 12 A @ 24 V DC | 300V AC | 1.1" | 1.2" | 1.6" | 0.187" | 00000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
| 11 | 24V DC | 58 | 15 A @ 120 V AC 12 A @ 24 V DC | 300V AC | 1.1" | 1.2" | 1.6" | 0.187" | 00000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
4 Circuits Controlled with 4 Off (Normally Open) or 4 On (Normally Closed)—4PDT | ||||||||||||||
Relay-Socket Mount | ||||||||||||||
| 14 | 24V AC | 50 | 8 A @ 120 V AC/24 V DC | 300V AC | 1.1" | 0.9" | 1.6" | 0.11" | 000000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
| 14 | 24V AC | 63 | 15 A @ 120 V AC 12 A @ 24 V DC | 300V AC | 1.1" | 1.6" | 1.6" | 0.187" | 00000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
| 14 | 120V AC | 10 | 8 A @ 120 V AC/24 V DC | 300V AC | 1.1" | 0.9" | 1.6" | 0.11" | 000000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
| 14 | 120V AC | 13 | 15 A @ 120 V AC 12 A @ 24 V DC | 300V AC | 1.1" | 1.6" | 1.6" | 0.187" | 00000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
| 14 | 240V AC | 5 | 8 A @ 120 V AC/24 V DC | 300V AC | 1.1" | 0.9" | 1.6" | 0.11" | 000000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
| 14 | 240V AC | 6 | 15 A @ 120 V AC 12 A @ 24 V DC | 300V AC | 1.1" | 1.6" | 1.6" | 0.187" | 00000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
| 14 | 12V DC | 92 | 8 A @ 120 V AC/24 V DC | 300V AC | 1.1" | 0.9" | 1.6" | 0.11" | 000000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
| 14 | 12V DC | 125 | 15 A @ 120 V AC 12 A @ 24 V DC | 300V AC | 1.1" | 1.6" | 1.6" | 0.187" | 00000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
| 14 | 24V DC | 6 | 15 A @ 120 V AC 12 A @ 24 V DC | 300V AC | 1.1" | 1.6" | 1.6" | 0.187" | 00000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
| 14 | 24V DC | 46 | 8 A @ 120 V AC/24 V DC | 300V AC | 1.1" | 0.9" | 1.6" | 0.11" | 000000000 | 00000 | 0000000 | 00000 | 000000 | 00 |
Solid State Spade-Terminal Relays
Often used for high-speed switching at low-current levels, these solid state relays have no moving parts, so they switch faster, last longer, and are quieter than mechanical switches.
Relay sockets mount directly on 35 mm DIN rail (also known as DIN 3 rail) for fast installation.
Relay sockets with screw terminals can also mount to a flat surface.
Circuit Board Relays
Smaller than relays with electrical wiring, these relays fit in compact devices. Mount them through holes on circuit boards with their solder pin terminals. Use them to control heaters, fans, and other high-power components from a low-power circuit.
Solid state relays have no moving parts, so they require less maintenance and last longer, switch faster, and are quieter than mechanical relays.
For technical drawings and 3-D models, click on a part number.
| Number of Terminals | Input Voltage | Control Current, mA | Switching Current @ Voltage | Max. Switching Voltage | Mechanical Life Cycles | Ht. | Wd. | Dp. | Pin Lg. | Each | |
Mechanical | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
1 Circuit Controlled with 1 Off (Normally Open) or 1 On (Normally Closed)—SPDT | |||||||||||
| 5 | 12V AC, 12V DC | 14 | 6 A @ 240 V AC | 250V AC | 10,000,000 | 1.1" | 0.2" | 0.6" | 0.14" | 0000000 | 00000 |
| 5 | 24V AC, 24V DC | 12 | 6 A @ 240 V AC | 250V AC | 10,000,000 | 1.1" | 0.2" | 0.6" | 0.14" | 0000000 | 0000 |
| 5 | 120V AC | 8.4 | 10 A @ 240 V AC | 250V AC | 10,000,000 | 1.1" | 0.5" | 1" | 0.21" | 0000000 | 0000 |
| 5 | 5V DC | 106 | 10 A @ 240 V AC/30 V DC | 380V AC/125V DC | 10,000,000 (AC Voltage) 20,000,000 (DC Voltage) | 1.1" | 0.5" | 1" | 0.16" | 0000000 | 0000 |
| 5 | 12V DC | 44 | 10 A @ 240 V AC/30 V DC | 380V AC/125V DC | 10,000,000 (AC Voltage) 20,000,000 (DC Voltage) | 1.1" | 0.5" | 1" | 0.16" | 0000000 | 0000 |
| 5 | 24V DC | 22 | 10 A @ 240 V AC/30 V DC | 380V AC/125V DC | 10,000,000 (AC Voltage) 20,000,000 (DC Voltage) | 1.1" | 0.5" | 1" | 0.16" | 0000000 | 0000 |
| 5 | 60V DC | 3 | 6 A @ 240 V AC | 250V AC | 10,000,000 | 1.1" | 0.2" | 0.6" | 0.14" | 0000000 | 0000 |
| 8 | 12V DC | 33 | 16 A @ 240 V AC | 250V AC | 10,000,000 | 1.1" | 0.5" | 0.6" | 0.1" | 0000000 | 0000 |
| 8 | 110V DC | 4.5 | 16 A @ 240 V AC | 250V AC | 10,000,000 | 1.1" | 0.5" | 0.6" | 0.1" | 0000000 | 0000 |
2 Circuits Controlled with 2 Off (Normally Open)—DPST-NO | |||||||||||
| 6 | 12V DC | 141 | 50 A @ 400 V AC | 400V AC | 1,000,000 | 2" | 1.3" | 2.3" | 0.18" | 0000000 | 00000 |
| 14 | 12V DC | 240 | 100 A @ 400 V AC | 400V AC | 1,000,000 | 2.1" | 2.1" | 2.3" | 0.18" | 0000000 | 00000 |
| 14 | 24V DC | 120 | 100 A @ 400 V AC | 400V AC | 1,000,000 | 2.1" | 2.1" | 2.3" | 0.18" | 0000000 | 00000 |
2 Circuits Controlled with 2 Off (Normally Open) or 2 On (Normally Closed)—DPDT | |||||||||||
| 8 | 120V AC | 8.4 | 8 A @ 240 V AC | 250V AC | 10,000,000 | 1.1" | 0.5" | 1" | 0.21" | 0000000 | 00000 |
| 8 | 5V DC | 106 | 5 A @ 240 V AC/30 V DC | 380V AC/125V DC | 10,000,000 (AC Voltage) 20,000,000 (DC Voltage) | 1.1" | 0.5" | 1" | 0.16" | 0000000 | 0000 |
| 8 | 12V DC | 44 | 5 A @ 240 V AC/30 V DC | 380V AC/125V DC | 10,000,000 (AC Voltage) 20,000,000 (DC Voltage) | 1.1" | 0.5" | 1" | 0.16" | 0000000 | 0000 |
| 8 | 24V DC | 22 | 5 A @ 240 V AC/30 V DC | 380V AC/125V DC | 10,000,000 (AC Voltage) 20,000,000 (DC Voltage) | 1.1" | 0.5" | 1" | 0.16" | 0000000 | 0000 |
| 8 | 110V DC | 4.5 | 8 A @ 240 V AC | 250V AC | 10,000,000 | 1.1" | 0.5" | 0.6" | 0.1" | 0000000 | 0000 |
3 Circuits Controlled with 3 Off (Normally Open)—3PST-NO | |||||||||||
| 8 | 12V DC | 224 | 50 A @ 400 V AC | 400V AC | 1,000,000 | 2" | 1.3" | 2.3" | 0.18" | 0000000 | 00000 |
| 8 | 24V DC | 71 | 50 A @ 400 V AC | 400V AC | 1,000,000 | 2" | 1.3" | 2.3" | 0.18" | 0000000 | 00000 |
Solid State | |||||||||||
1 Circuit Controlled with 1 Off (Normally Open)—SPST-NO | |||||||||||
| 4 | 24V DC | 7 | 2 A @ 240 V AC | 250V AC | __ | 1.1" | 0.2" | 0.6" | 0.14" | 0000000 | 00000 |
| 4 | 60V DC | 3.5 | 2 A @ 240 V AC | 250V AC | __ | 1.1" | 0.2" | 0.6" | 0.14" | 0000000 | 00000 |
| 4 | 60V DC | 7 | 6 A @ 24 V DC | 24V DC | __ | 1.1" | 0.2" | 0.6" | 0.14" | 0000000 | 00000 |
Circuit Board Safety Relays
Reduce connection errors on circuit boards that control machine guards and other safety devices. Also known as force-guided contact relays, they have contacts that won’t close at the same time, causing contacts to stick or weld shut. These relays take up less space on a board than those with electrical wiring because their solder pin terminals mount directly through circuit board holes. Use them to control high-power components, such as fans and heaters, from a low-power circuit.
For technical drawings and 3-D models, click on a part number.
| Number of Terminals | Input Voltage | Control Current, mA | Switching Current @ Voltage | Max. Switching Voltage | Mechanical Life Cycles | Ht. | Wd. | Dp. | Pin Lg. | Each | |
2 Circuits Controlled with 2 Off (Normally Open) or 2 On (Normally Closed)—DPDT | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 8 | 24V DC | 29 | 8 A @ 240 V AC | 250V AC | 10,000,000 | 1.1" | 0.5" | 1" | 0.2" | 0000000 | 000000 |
Weatherproof High-Starting-Current Vehicle Relays
Crimp-On
Terminals
The extended housing covers and protects terminals. Also known as automotive relays, they can handle high starting (inrush) currents. They have a tab for added security in high-vibration applications.
Relays | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Switching Current @ Voltage | Relay Sockets with Crimp-On Terminals | Relay Sockets with Wire Leads | ||||||||||||||
| Number of Terminals | Input Voltage | Off (Normally Open) Circuit Position | On (Normally Closed) Circuit Position | Max. Switching Voltage | Max. Starting Current, A | Control Current, mA | Ht. | Wd. | Dp. | Quick-Disconnect Tab Wd. | Each | Each | Each | |||
1 Circuit Controlled with 1 Off (Normally Open) or 1 On (Normally Closed)—SPDT | ||||||||||||||||
| 5 | 12V DC | 40 A @ 12 V DC | 20 A @ 12 V DC | 18V DC | 150 | 138 | 1.4" | 1.4" | 1.8" | 0.25" | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 000000 |
| 5 | 24V DC | 20 A @ 24 V DC | 10 A @ 24 V DC | 40V DC | 120 | 107 | 1.4" | 1.4" | 1.8" | 0.25" | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 |
High-Starting-Current Vehicle Relays
Relay Socket and
Surface Mounting
Crimp-On
Terminals
Also known as automotive relays, these relays can handle high starting (inrush) currents.
Relays for surface mounting have a tab for added security in high-vibration applications.
Relays | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Switching Current @ Voltage | Relay Sockets with Crimp-On Terminals | Relay Sockets with Wire Leads | ||||||||||||||
| Number of Terminals | Input Voltage | Off (Normally Open) Circuit Position | On (Normally Closed) Circuit Position | Max. Switching Voltage | Max. Starting Current, A | Control Current, mA | Ht. | Wd. | Dp. | Quick-Disconnect Tab Wd. | Each | Each | Each | |||
For Relay Socket | ||||||||||||||||
1 Circuit Controlled with 1 Off (Normally Open)—SPST-NO | ||||||||||||||||
| 5 | 24V DC | 20 A @ 24 V DC | __ | 40V DC | 120 | 69 | 1" | 1" | 0.9" | 0.25" | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 000000 |
1 Circuit Controlled with 1 Off (Normally Open) or 1 On (Normally Closed)—SPDT | ||||||||||||||||
| 5 | 12V DC | 30 A @ 12 V DC | 20 A @ 12 V DC | 18V DC | 150 | 138 | 1.02" | 1.02" | 0.94" | 0.25" | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 |
| 5 | 24V DC | 20 A @ 24 V DC | 10 A @ 24 V DC | 36V DC | 150 | 99 | 1" | 1" | 1" | 0.25" | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 |
For Relay Socket and Surface Mounting | ||||||||||||||||
1 Circuit Controlled with 1 Off (Normally Open)—SPST-NO | ||||||||||||||||
| 4 | 12V DC | 50 A @ 12 V DC | __ | 18V DC | 150 | 138 | 1.2" | 1" | 1" | 0.25" and 0.375" | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 |
| 4 | 24V DC | 70 A @ 24 V DC | __ | 40V DC | 200 | 75 | 1.5" | 1.4" | 1" | 0.25" and 0.375" | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 |
| 5 | 12V DC | 40 A @ 12 V DC | __ | 20V DC | 150 | 141 | 1" | 1" | 0.9" | 0.25" | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 |
1 Circuit Controlled with 1 Off (Normally Open) or 1 On (Normally Closed)—SPDT | ||||||||||||||||
| 5 | 12V DC | 30 A @ 12 V DC | 20 A @ 12 V DC | 18V DC | 150 | 138 | 1.1" | 1.1" | 1" | 0.25" | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
| 5 | 24V DC | 20 A @ 24 V DC | 10 A @ 24 V DC | 40V DC | 120 | 109 | 1" | 1" | 0.9" | 0.25" | 0000000 | 00000 | 0000000 | 0000 | 0000000 | 00000 |
Solid State High-Starting-Current Vehicle Relays
Crimp-On
Terminals
With no moving parts, these solid state relays require less maintenance and last longer, switch faster, and are quieter than mechanical relays. They can handle high starting (inrush) currents. The blade terminals meet ISO 8092-1 dimensions, ensuring they are compatible with the electrical connections in road vehicles you need to maintain or repair. Also known as ISO relays or automotive relays.
Relays | Relay Sockets with Crimp-On Terminals | Relay Sockets with Wire Leads | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Number of Terminals | Input Voltage | Switching Current @ 12V DC | Max. Switching Voltage | Max. Starting Current, A | Control Current, mA | Ht. | Wd. | Dp. | Quick-Disconnect Tab Wd. | Each | Each | Each | |||
1 Circuit Controlled with 1 Off (Normally Open)—SPST-NO | |||||||||||||||
| 4 | 12V DC | 20A | 16V DC | 80 | 10 | 1.1" | 1.1" | 1" | 0.25" | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 000000 |