Bearing Separators
Clamping
Screw
Separate bearings, collars, hubs, and other shaft-mounted items so you can remove them. After separation, use a puller (not included) to remove them from the shaft.
Separators can be used with Face-Grip Pullers. Select a face-grip puller with a leg thread size that matches the thread size of your separator.
Separators with a clamping screw use screw tension to force separator plates under bearings when there isn’t enough space for them to fit.
For technical drawings and 3-D models, click on a part number.
Bearing/V-Belt Pulley Separator Sets
Separate bearings, collars, hubs, and other shaft-mounted items so you can remove them. After separation, use a puller (not included with all sets) to remove them from the shaft.
Sets that include a clamping screw use screw tension to force separator plates under bearing if there is not enough clearance.
| Thread Size  | Material | Includes | Each | |
| M10 | Steel | Separator (5/16"-2 3/8" Spread) Face-Grip Puller (For 2"-4 3/8" OD; 5 7/8" Reach; M10 Leg Thread Size) with 5 1/8" Long Forcing Screw Pair of Legs (3 7/8" Reach) for Face-Grip Puller Grease Metal Case | 0000000 | 0000000 |
| M10 | Steel | Separator (5/16"-2 3/8" Spread) Face-Grip Puller (For 2"-4 3/8" OD; 5 7/8" Reach; M10 Leg Thread Size) with 5 1/8" Long Forcing Screw Pair of Legs (3 7/8" Reach) for Face-Grip Puller Grease Metal Case | 0000000 | 000000 |
Expanding-Collar Internal Grip Pullers
Get a grip on objects with blind holes—these pullers have an expanding collet that secures bearings and bushings from inside.
Ready-to-use pullers have a nut that you tighten down to expand the collet jaws inside the object you’re pulling. When the collet is secure, use a bridge or a slide hammer (both sold separately) to apply force. A safety catch prevents the puller from overextending.
For technical drawings and 3-D models, click on a part number.
