About Torque Tools
More
Chuck-Style Torque Tool Testers
![](/prerenderstable/mvPRE/contents/gfx/imagecache/833/83395a14p1-a07a-digital@halfx_637054611536450420.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/glo/global-icon-materialcertification-j081570022381-p9@halfx_637056012007433519.png?ver=imagenotfound)
Finger-tighten the three-jaw chuck onto a torque wrench or screwdriver, then twist either the gauge or tool to check the tool’s accuracy. A pointer on the dial shows torque as it’s measured—no batteries required. Bring these pocket-sized testers anywhere your tools are.
All testers come with a calibration certificate with test data traceable to either NIST or JIS, so they meet standards for accuracy. For the most accurate performance, the maximum torque you're applying should fall near the middle of the tester's torque range. Use with hand tools only.
Testers with memory pointer show the maximum torque reached.
For technical drawings and 3-D models, click on a part number.
Accuracy | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Torque Range | Graduations | Chuck Capacity | Torque-Measuring Direction | Clockwise | Counterclockwise | Dial OD | Features | Material | Chuck Material | Container Type | Each | |
With Calibration Certificate with Test Data Traceable to JIS | ||||||||||||
in.-lbs. | ||||||||||||
0.6 to 6 in.-lbs. | 0.1 in.-lbs. | 11/32" | Clockwise and Counterclockwise | ±2% | ±2% | 2 1/2" | Memory Pointer | Aluminum | Steel | Plastic Case | 00000000 | 0000000 |
2 to 15 in.-lbs. | 0.2 in.-lbs. | 11/32" | Clockwise and Counterclockwise | ±2% | ±2% | 2 1/2" | Memory Pointer | Aluminum | Steel | Plastic Case | 00000000 | 000000 |
Square Drive Torque Tool Testers
![](/prerenderstable/mvPRE/contents/gfx/imagecache/715/7154a11-@halfx_637302348863990652.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/glo/global-icon-materialcertification-j081570022381-p9@halfx_637056012007433519.png?ver=imagenotfound)
Check the accuracy of torque wrenches and screwdrivers—place your tool onto the tester with the included square drive connector and turn. The main pointer shows torque as it's measured; the memory pointer shows the maximum torque reached. Use these testers with hand tools only.
Note: For the most accurate performance, the maximum torque you apply should fall near the middle of the tester’s torque range.
For technical drawings and 3-D models, click on a part number.
Accuracy | Mounting Holes | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Drive Size | Torque Range | Graduations | Torque-Measuring Direction | Clockwise | Counterclockwise | Lg. | Wd. | Ht. | Material | Mounting Fasteners Included | No. of | Dia. | Each | |
With Calibration Certificate Traceable to NIST | ||||||||||||||
in.-lbs. | ||||||||||||||
1/4" | 6 to 30 in.-lbs. | 0.5 in.-lbs. | Clockwise and Counterclockwise | ±2% | ±2% | 8" | 4" | 2 1/4" | Steel | No | 4 | 1/4" | 0000000 | 0000000 |
1/4" | 15 to 75 in.-lbs. | 1 in.-lbs. | Clockwise and Counterclockwise | ±2% | ±2% | 8" | 4" | 2 1/4" | Steel | No | 4 | 1/4" | 0000000 | 000000 |
1/4" | 20 to 100 in.-lbs. | 2 in.-lbs. | Clockwise and Counterclockwise | ±2% | ±2% | 8" | 4" | 2 1/4" | Steel | No | 4 | 1/4" | 0000000 | 000000 |
3/8" | 30 to 150 in.-lbs. | 2.5 in.-lbs. | Clockwise and Counterclockwise | ±2% | ±2% | 8" | 4" | 2 1/4" | Steel | No | 4 | 1/4" | 0000000 | 000000 |
3/8" | 60 to 300 in.-lbs. | 5 in.-lbs. | Clockwise and Counterclockwise | ±2% | ±2% | 8" | 4" | 2 1/4" | Steel | No | 4 | 1/4" | 0000000 | 00000000 |
3/8" | 120 to 600 in.-lbs. | 10 in.-lbs. | Clockwise and Counterclockwise | ±2% | ±2% | 8" | 4" | 2 1/4" | Steel | No | 4 | 1/4" | 0000000 | 00000000 |
Opening-and-Closing Torque Testers for Caps and Knobs
![](/prerenderstable/mvPRE/contents/gfx/imagecache/351/3519n14p2-@halfx_637024919101071742.png?ver=imagenotfound)
Measure the twisting force needed to tighten or loosen caps and knobs with these torque testers. Four adjustable gripping posts clamp round and irregularly-shaped containers. Twist the top by hand to measure force or use it to calibrate your capping machine, so it applies the right amount of force in a production line. For the most accurate performance, the maximum torque you’re applying should fall near the middle of the tester’s torque range. If you accidentally exceed the torque range, these testers have overload protection to prevent damage to the measuring system.
View torque measurements, change operating modes, and switch units of measurement on the LCD screen. Store data on the microSD card, transfer it to your devices via Bluetooth or USB, or print using the DB9 cable. The I/O cable connects to controllers to operate other devices dependent on torque force readings.
Testers with a calibration certificate with test data traceable to NIST meet standards for accuracy.
Accuracy | Clamp | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Torque Range | Graduations | Torque-Measuring Direction | Clockwise | Counterclockwise | Ht. | Wd. | Dp. | Ht. | Opening Range | Voltage | Plug Type | Cord Lg., ft. | Each | |
Testers | ||||||||||||||
lbf-in., gf-m, Nm | ||||||||||||||
0.01 to 17 lbf-in. 0.1 to 200 gf-m 0.001 to 2 Nm | 0.01 lbf-in. 0.1 gf-m 0.001 Nm | Clockwise and Counterclockwise | ±0.5% | ±0.5% | 6" | 9 1/4" | 13 1/2" | 1 1/2" | 0.813" to 7" | 120V AC | Two Prong | 5 | 0000000 | 000000000 |
0.01 to 44 lbf-in. 0.1 to 500 gf-m 0.001 to 5 Nm | 0.01 lbf-in. 0.1 gf-m 0.001 Nm | Clockwise and Counterclockwise | ±0.5% | ±0.5% | 6" | 9 1/4" | 13 1/2" | 1 1/2" | 0.813" to 7" | 120V AC | Two Prong | 5 | 0000000 | 00000000 |
0.1 to 100 lbf-in. 0.1 to 1,000 gf-m 0.1 to 10 Nm | 0.1 lbf-in. 1 gf-m 0.01 Nm | Clockwise and Counterclockwise | ±0.5% | ±0.5% | 6" | 9 1/4" | 13 1/2" | 1 1/2" | 0.813" to 7" | 120V AC | Two Prong | 5 | 0000000 | 00000000 |
Testers with Calibration Certificate with Test Data Traceable to NIST | ||||||||||||||
lbf-in., gf-m, Nm | ||||||||||||||
0.01 to 17 lbf-in. 0.1 to 200 gf-m 0.001 to 2 Nm | 0.01 lbf-in. 0.1 gf-m 0.001 Nm | Clockwise and Counterclockwise | ±0.5% | ±0.5% | 6" | 9 1/4" | 13 1/2" | 1 1/2" | 0.813" to 7" | 120V AC | Two Prong | 5 | 0000000 | 00000000 |
0.01 to 44 lbf-in. 0.1 to 500 gf-m 0.001 to 5 Nm | 0.01 lbf-in. 0.1 gf-m 0.001 Nm | Clockwise and Counterclockwise | ±0.5% | ±0.5% | 6" | 9 1/4" | 13 1/2" | 1 1/2" | 0.813" to 7" | 120V AC | Two Prong | 5 | 0000000 | 00000000 |
0.1 to 100 lbf-in. 0.1 to 1,000 gf-m 0.1 to 10 Nm | 0.1 lbf-in. 1 gf-m 0.01 Nm | Clockwise and Counterclockwise | ±0.5% | ±0.5% | 6" | 9 1/4" | 13 1/2" | 1 1/2" | 0.813" to 7" | 120V AC | Two Prong | 5 | 0000000 | 00000000 |
Torque Testers for Torque-Limiting Power Tools
![](/prerenderstable/mvPRE/contents/gfx/imagecache/347/3472n1-@halfx_637068107658938145.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/347/3472n1-@halfx_637069100382866547.png?ver=imagenotfound)
Calibrate torque-limiting power tools such as air-powered and impact drivers. These testers check clockwise and counterclockwise torque, so fasteners do not fail because they were too loose or over-tightened and deformed. They record the first time your maximum torque is reached (peak down), the maximum torque (peak), and torque as it's measured (real-time). Use the flexible or rigid joints to connect your tools to these testers to simulate your fastening application.
These testers have a calibration certificate with test data traceable to NIST, so they meet standards for accuracy. For the most accurate performance, the maximum torque you're applying should fall near the middle of the tester's torque range.
Testers that meet ISO 17025 have been checked in a laboratory that was evaluated for accuracy.
Connect to computers, laptops, or tablets that run on Microsoft Windows with a USB cable and analyze results with data acquisition software (both sold separately).
For technical drawings and 3-D models, click on a part number.
Accuracy | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Joint Hex Head Wd., mm | Torque Range | Graduations | Torque-Measuring Direction | Clockwise | Counterclockwise | Ht. | Wd. | Dp. | Material | Battery Type | Charger Plug Type | Includes | Each | |
With Calibration Certificate with Test Data Traceable to NIST Certificate of Calibration | ||||||||||||||
lbf-in., kgf-cm, N-cm | ||||||||||||||
14 | 3 to 220 lbf-in. 3 to 250 kgf-cm 30 to 2,500 N-cm | 0.001 kgf-cm 0.1 lbf-in. 1 N-cm | Clockwise and Counterclockwise | ±0.5% | ±0.5% | 3" | 6" | 8 1/2" | Steel | Rechargeable | Two Prong | 1 Drive Adapter (3/8" Hex Shank), 2 Joints (Flexible and Rigid), Carrying Case | 000000 | 000000000 |
With Calibration Certificate with Test Data Traceable to NIST Certificate of Calibration—ISO 17025 | ||||||||||||||
lbf-in., kgf-cm, N-cm | ||||||||||||||
14 | 3 to 220 lbf-in. 3 to 250 kgf-cm 30 to 2,500 N-cm | 0.001 kgf-cm 0.1 lbf-in. 1 N-cm | Clockwise and Counterclockwise | ±0.5% | ±0.5% | 3" | 6" | 8 1/2" | Steel | Rechargeable | Two Prong | 1 Drive Adapter (3/8" Hex Shank), 2 Joints (Flexible and Rigid), Carrying Case | 000000 | 00000000 |
High-Accuracy Torque Tool Testers
![](/prerenderstable/mvPRE/contents/gfx/imagecache/445/4457a41p1-a07a-digital@halfx_637054647025516690.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/glo/global-icon-materialcertification-j081570022381-p9@halfx_637056012007433519.png?ver=imagenotfound)
These testers have a digital display and are accurate to ±1%. Place your torque wrench or screwdriver onto the tester with the included square drive connector and turn. Testers display torque as it's measured and the maximum torque reached. They also show the first torque peak reached to ensure accurate readings when testing click-style wrenches. Use with hand tools only.
Note: The accuracy ratings do not apply to the lower 10% of the torque range.
Accuracy | Mounting Holes | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Square Drive Size | Torque Range | Graduations | Torque-Measuring Direction | Clockwise | Counterclockwise | Ht. | Wd. | Dp. | Material | Mounting Fasteners Included | No. of | Dia. | Batteries Included | Each | |
With Calibration Certificate with Test Data Traceable to NIST Certificate of Calibration | |||||||||||||||
in.-lbs., ft.-lbs., Nm | |||||||||||||||
1/4" | 5 to 50 in.-lbs. 0.4 to 4.17 ft.-lbs. 0.56 to 5.65 Nm | 0.01 in.-lbs. 0.01 ft.-lbs. 0.01 Nm | Clockwise and Counterclockwise | ±1% | ±1% | 4 1/2" | 6" | 6" | Steel | No | 8 | 3/8" | Yes | 0000000 | 000000000 |
3/8" | 25 to 250 in.-lbs. 2 to 21 ft.-lbs. 2.8 to 28.2 Nm | 0.1 in.-lbs. 0.01 ft.-lbs. 0.01 Nm | Clockwise and Counterclockwise | ±1% | ±1% | 4 1/2" | 6" | 6" | Steel | No | 8 | 3/8" | Yes | 0000000 | 00000000 |
3/8" | 60 to 600 in.-lbs. 5 to 50 ft.-lbs. 6.78 to 67.8 Nm | 0.1 in.-lbs. 0.01 ft.-lbs. 0.1 Nm | Clockwise and Counterclockwise | ±1% | ±1% | 4 1/2" | 6" | 6" | Steel | No | 8 | 3/8" | Yes | 0000000 | 00000000 |
1/2" | 300 to 3,000 in.-lbs. 25 to 250 ft.-lbs. 33.8 to 338 Nm | 1 in.-lbs. 0.1 ft.-lbs. 0.1 Nm | Clockwise and Counterclockwise | ±1% | ±1% | 4 1/2" | 6" | 6" | Steel | No | 8 | 3/8" | Yes | 0000000 | 00000000 |
3/4" | 720 to 7,200 in.-lbs. 60 to 600 ft.-lbs. 81.3 to 813 Nm | 1 in.-lbs. 0.1 ft.-lbs. 0.1 Nm | Clockwise and Counterclockwise | ±1% | ±1% | 4 1/2" | 6" | 6" | Steel | No | 8 | 3/8" | Yes | 0000000 | 00000000 |
Torque Tool Testers for Torque Screwdrivers
![](/prerenderstable/mvPRE/contents/gfx/imagecache/347/3473n1-@halfx_637068158248772899.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/347/3473n1-@halfx_637069036744652127.png?ver=imagenotfound)
Measure the force of hand and non-impact electric torque screwdrivers to keep fasteners from failing due to under or overtightening. A chuck-like adapter simulates your fastener joint during testing. Return the fastener to its starting position with the press of a button to reduce time between tests. These testers record the first time you reach the maximum torque (peak down), the maximum torque (peak), and torque as it's measured (real-time). A track mode lets you monitor fluctuating torque. For quick pass/fail testing, these testers have programmable high/low set points with lights and an alarm. They include a calibration certificate with test data traceable to NIST that states they have passed tests for accuracy.
Testers that meet ISO 17025 have been checked in a laboratory that was evaluated for accuracy.
Use data acquisition software and a USB cable (each sold separately) to analyze results and connect to computers, laptops, or tablets that run on Microsoft Windows.
For technical drawings and 3-D models, click on a part number.
Accuracy | |||||||||
---|---|---|---|---|---|---|---|---|---|
Screw Size | Torque Range | Graduations | Clockwise | Counterclockwise | Battery Type | Charger Plug Type | Includes | Each | |
With Calibration Certificate with Test Data Traceable to NIST Certificate of Calibration | |||||||||
lbf-in., kgf-cm, N-cm | |||||||||
No. 2 | 0.02 to 6.97 lbf-in. 0.02 to 8 kgf-cm 0.2 to 78.6 N-cm | 0.001 lbf-in. 0.001 kgf-cm 0.01 N-cm | ±0.5% | ±0.5% | Rechargeable | Two Prong | 2 Joints (High- and Low-Torque), Carrying Case | 000000 | 000000000 |
lbf-in., kgf-cm, N-cm, Nm | |||||||||
No. 2, No. 3 | 0.2 to 69.70 lbf-in. 0.2 to 80.00 kgf-cm 2 to 786.00 N-cm 0.02 to 7.86 Nm | 0.01 lbf-in. 0.01 kgf-cm 0.1 N-cm 0.001 Nm | ±0.5% | ±0.5% | Rechargeable | Two Prong | 2 Joints (High- and Low-Torque), Carrying Case | 000000 | 00000000 |
With Calibration Certificate with Test Data Traceable to NIST Certificate of Calibration—ISO 17025 | |||||||||
lbf-in., kgf-cm, N-cm | |||||||||
No. 2 | 0.02 to 6.97 lbf-in. 0.02 to 8 kgf-cm 0.2 to 78.6 N-cm | 0.001 lbf-in. 0.001 kgf-cm 0.01 N-cm | ±0.5% | ±0.5% | Rechargeable | Two Prong | 2 Joints (High- and Low-Torque), Carrying Case | 000000 | 00000000 |
lbf-in., kgf-cm, N-cm, Nm | |||||||||
No. 2, No. 3 | 0.2 to 69.70 lbf-in. 0.2 to 80.00 kgf-cm 2 to 786.00 N-cm 0.02 to 7.86 Nm | 0.01 lbf-in. 0.01 kgf-cm 0.1 N-cm 0.001 Nm | ±0.5% | ±0.5% | Rechargeable | Two Prong | 2 Joints (High- and Low-Torque), Carrying Case | 000000 | 00000000 |
Data-Recording Torque Gauges
Use these gauges with changeable sensors and square-drive sockets (sold separately) to display, collect, and download torque readings. They display torque as it's measured and the maximum torque reached. Gauges can also be used to convert any hand-turned square drive tool into a precise torque-measuring tool. For the most accurate performance, the maximum torque you're applying should fall near the middle of the gauge's torque range.
Wrench-attachable sensors fit between your wrench and socket. Use with hand tools only.
Hand-turned sensors don't require a tool; place into your socket and turn them with your hand.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/583/5833a11p2-a07a-digital@halfx_637054669967059438.png?ver=imagenotfound)
Features | Lg. | Wd. | Ht. | Data Log Cap. | Batteries Included | Includes | Container Type | Each | |
in.-oz., in.-lbs., ft.-lbs., Nm, cNm, m-kg, cm.-kg | |||||||||
---|---|---|---|---|---|---|---|---|---|
Torque Measurement Memory, Programmable Torque Settings, Maximum Torque Display, Keypad, Headphone Jack, Audible Alarm | 6" | 3" | 2 1/2" | 3,500 | Yes | 3-ft Long USB Cable | Plastic Case | 0000000 | 000000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/583/5833a23c1-1594837728-p9@halfx_637304165496926182.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/583/5833a24p1-a07a-digital@halfx_637054639226858426.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/glo/global-icon-materialcertification-j081570022381-p9@halfx_637056012007433519.png?ver=imagenotfound)
Accuracy | |||||||
---|---|---|---|---|---|---|---|
Square Drive Size (Gender) | Torque Range | Torque-Measuring Direction | Clockwise | Counterclockwise | Cord Lg., ft. | Each | |
in.-oz., in.-lbs., ft.-lbs., Nm, cNm, m-kg, cm-kg | |||||||
1/4" (Female) × 1/4" (Male) | 80 to 800 in.-oz. 5 to 50 in.-lbs. 0.417 to 4.17 ft.-lbs. 0.565 to 5.65 Nm 56.5 to 565 cNm 0.058 to 0.576 m-kg 5.76 to 57.6 cm-kg | Clockwise and Counterclockwise | ±1% | ±1% | 4 | 0000000 | 0000000 |
1/4" (Female) × 1/4" (Male) | 320 to 3,200 in.-oz. 20 to 200 in.-lbs. 1.67 to 16.7 ft.-lbs. 2.26 to 22.6 Nm 226 to 2,260 cNm 0.23 to 2.3 m-kg 23 to 230 cm-kg | Clockwise and Counterclockwise | ±1% | ±1% | 4 | 0000000 | 000000 |
3/8" (Female) × 3/8" (Male) | 120 to 1,200 in.-lbs. 10 to 100 ft.-lbs. 13.6 to 136 Nm 1,356 to 13,560 cNm 1.38 to 13.8 m-kg 138 to 1,383 cm-kg | Clockwise and Counterclockwise | ±1% | ±1% | 4 | 0000000 | 000000 |
1/2" (Female) × 1/2" (Male) | 300 to 3,000 in.-lbs. 25 to 250 ft.-lbs. 33.9 to 339 Nm 3,390 to 33,900 cNm 3.46 to 34.6 m-kg 346 to 3,456 cm-kg | Clockwise and Counterclockwise | ±1% | ±1% | 4 | 0000000 | 000000 |
3/4" (Female) × 3/4" (Male) | 720 to 7,200 in.-lbs. 60 to 600 ft.-lbs. 81.3 to 813 Nm 8,135 to 81,350 cNm 8.3 to 83 m-kg 830 to 8,295 cm-kg | Clockwise and Counterclockwise | ±1% | ±1% | 8 | 0000000 | 000000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/583/5833a25p1-a07a-digital@halfx_637054632426475925.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/glo/global-icon-materialcertification-j081570022381-p9@halfx_637056012007433519.png?ver=imagenotfound)
Accuracy | |||||||
---|---|---|---|---|---|---|---|
Square Drive Size (Gender) | Torque Range | Torque-Measuring Direction | Clockwise | Counterclockwise | Cord Lg., ft. | Each | |
in.-oz., in.-lbs., ft.-lbs., Nm, cNm, m-kg, cm-kg | |||||||
1/4" (Male) | 2 to 20 in.-oz. 0.125 to 1.25 in.-lbs. 0.01 to 0.104 ft.-lbs. 0.014 to 0.141 Nm 1.41 to 14.1 cNm 0.001 to 0.014 m-kg 0.144 to 1.44 cm-kg | Clockwise and Counterclockwise | ±2% | ±2% | 4 | 0000000 | 0000000 |
1/4" (Male) | 16 to 160 in.-oz. 1 to 10 in.-lbs. 0.083 to 0.833 ft.-lbs. 0.113 to 1.13 Nm 11.3 to 113 cNm 0.012 to 0.115 m-kg 1.15 to 11.5 cm-kg | Clockwise and Counterclockwise | ±2% | ±2% | 4 | 0000000 | 000000 |
Torque-Measuring Screwdrivers
![](/prerenderstable/mvPRE/contents/gfx/imagecache/569/5699a18p2-a07a-digital@halfx_637098990307871153.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/i14/i142-global-icon-materialcertification-original-1612275126-p9@halfx_637478503355600064.png?ver=imagenotfound)
A dial shows how torque measurements change as you turn the driver. Use these tools to fasten to a specific torque, determine fastener torque specifications, and identify the torque required to loosen tightened fasteners.
Calibration certificate traceable to NIST states the product has passed a test for accuracy.
Accuracy | Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Torque Range | Graduations | For Bit Hex Shank Size | Clockwise | Counterclockwise | Certification | O'all Lg. | Shaft | Handle | Includes | Each | |
in.-lbs. | |||||||||||
0-100 in.-lbs. | 5 in.-lbs. | 1/4" | ±3% | __ | Calibration Certificate Traceable to NIST | 12" | Steel | Plastic | No. 2 Phillips Screwdriver Bit 1/4" Slotted Screwdriver Bit 1/4" Square Drive Socket Adapter | 0000000 | 0000000 |
0-12 in.-lbs. | 0.5 in.-lbs. | 1/4" | ±3% | ±3% | Calibration Certificate Traceable to NIST | 8" | Steel | Plastic | No. 2 Phillips Screwdriver Bit 1/4" Slotted Screwdriver Bit 1/4" Square Drive Socket Adapter | 0000000 | 000000 |
0-25 in.-lbs. | 1 in.-lbs. | 1/4" | ±3% | __ | Calibration Certificate Traceable to NIST | 10" | Steel | Plastic | No. 2 Phillips Screwdriver Bit 1/4" Slotted Screwdriver Bit 1/4" Square Drive Socket Adapter | 0000000 | 000000 |
0-50 in.-lbs. | 2 in.-lbs. | 1/4" | ±3% | __ | Calibration Certificate Traceable to NIST | 10" | Steel | Plastic | No. 2 Phillips Screwdriver Bit 1/4" Slotted Screwdriver Bit 1/4" Square Drive Socket Adapter | 0000000 | 000000 |
0-6 in.-lbs. | 0.25 in.-lbs. | 1/4" | ±3% | ±3% | Calibration Certificate Traceable to NIST | 8" | Steel | Plastic | No. 2 Phillips Screwdriver Bit 1/4" Slotted Screwdriver Bit 1/4" Square Drive Socket Adapter | 0000000 | 000000 |
Digital Torque-Measuring Screwdrivers
![](/prerenderstable/mvPRE/contents/gfx/imagecache/340/3406n13-@halfx_636994033861063431.png?ver=imagenotfound)
A green light and a beep alert you when you've reached 90% of your set torque, and a steady tone sounds once you've hit your target. Set your torque in cNm, cm-Kg, or in.-lbs. and quickly check the LCD for real-time measurements along the way. A red light warns if you begin to overtighten. In addition to applying the correct torque to a fastener, these screwdrivers can help determine fastener torque specifications and identify the torque required to loosen tightened fasteners. They store up to nine torque settings to save time when working on multiple fasteners. They're compatible with any bit that has a 1/4" hex shank. All require one AAA battery (included). To save battery power, the display turns off after five minutes of idle time. You can also turn the display off manually.
Accurate to within 2% of the set torque in the clockwise direction, and 3% in the counterclockwise direction, these screwdrivers are more precise than standard torque screwdrivers. All screwdrivers come with a calibration certificate from the manufacturer. Screwdrivers with calibration certificate with test data traceable to NIST include the test measurements that confirm accuracy.
Accuracy | Material | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Torque Range | Graduations | For Bit Hex Shank Size | Clockwise | Counterclockwise | O'all Lg. | Shaft | Handle | Batteries Included | Each | |
Calibration Certificate | ||||||||||
in.-lbs., cNm, cm-kg | ||||||||||
0.45-4.4 in.-lbs. 5-50 cNm 0.5-5 cm-kg | 0.01 in.-lbs. 0.1 cNm 0.01 cm-kg | 1/4" | ±2% | ±3% | 8" | Steel | Plastic | Yes | 0000000 | 0000000 |
1.7-17.7 in.-lbs. 20-200 cNm 2-20 cm-kg | 0.01 in.-lbs. 0.1 cNm 0.01 cm-kg | 1/4" | ±2% | ±3% | 8" | Steel | Plastic | Yes | 0000000 | 000000 |
3.5-35 in.-lbs. 40-400 cNm 4-40 cm-kg | 0.01 in.-lbs. 0.1 cNm 0.01 cm-kg | 1/4" | ±2% | ±3% | 8" | Steel | Plastic | Yes | 0000000 | 000000 |
Calibration Certificate with Test Data Traceable to NIST Certificate of Calibration | ||||||||||
in.-lbs., cNm, cm-kg | ||||||||||
0.45-4.4 in.-lbs. 5-50 cNm 0.5-5 cm-kg | 0.01 in.-lbs. 0.1 cNm 0.01 cm-kg | 1/4" | ±2% | ±3% | 8" | Steel | Plastic | Yes | 0000000 | 000000 |
1.7-17.7 in.-lbs. 20-200 cNm 2-20 cm-kg | 0.01 in.-lbs. 0.1 cNm 0.01 cm-kg | 1/4" | ±2% | ±3% | 8" | Steel | Plastic | Yes | 0000000 | 000000 |
3.5-35 in.-lbs. 40-400 cNm 4-40 cm-kg | 0.01 in.-lbs. 0.1 cNm 0.01 cm-kg | 1/4" | ±2% | ±3% | 8" | Steel | Plastic | Yes | 0000000 | 000000 |