Housing is plastic.

Check how much force a part can take before it bends, stretches, or breaks.

These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

Measure the tension of wire or cable.

Apply your load directly to the top of these gauges to measure compression force.

Take tension and compression measurements at 0.1% accuracy—the highest accuracy of all our force gauges.

Safely view your tension force measurements on a handheld receiver up to 450 ft. away when moving bulk material with cranes and hoists.

Designed to test the pull and push force of springs, insert these testers into your quality control line right out of the box.

Measure the force needed to carry out tasks in your facility, such as pushing carts, pulling pallet trucks, or lifting containers.

Calibrate these sensors to your desired capacity to measure tension, compression, or both. Also known as load cells, they measure and track the forces of your equipment by converting them into electrical signals.

View weight measurements from your tension and compression force sensor.

Suspend items from the bottom hook and read their weights on the classic dial face.

NTEP certified, these hanging scales are for use with materials sold by weight.

Attach the bar handle to these scales for weighing by hand.

Ten times more accurate than standard bench-top scales, these scales are extremely precise. They’re NTEP approved for measuring materials sold by weight.

IP rated for washdowns and use in dusty and wet environments, these scales are NTEP approved to weigh materials that are sold by weight.

For corrosion resistance in addition to portability, this scale has a powder-coated steel housing and platform.

These scales are often used on small bench tops where larger scales won’t fit.

A stack light and audible alarm alert you when packages, products, and parts are too heavy or too light. Also known as check weighers, these scales verify quality and consistency in packing, parts machining, and other activities.

Place these scales on your bench top and view weights on an easy-to-read digital screen.

Weigh loads on your benchtop without obstructing the display.

Commonly used to prevent overloading a trailer tongue, these scales estimate the weight of large loads that don’t fit on a standard floor scale.

Roll this scale wherever you need to weigh.

Similar in style to a hand truck, this scale tilts back on two rubber wheels to move.

Position the display up to 14 feet from the platform for reading at a safe distance.

IP69K and NTEP approved as legal for trade, use these scales in washdown environments for material that may be sold by weight.