About Foam
More
Gaskets for 37° Flared Tube Fittings
Prevent leaks from temperature fluctuations and vibration that can loosen 37° flared tube fittings. In general, you should match your gasket material to your fitting material. But, if you have a brass fitting, you can use a copper gasket.
Gaskets without a coating are best for fittings that are exposed to harsh chemicals, such as antifreeze, which can dissolve the threadlocker coating.
Threadlocker-coated gaskets offer a more secure hold than uncoated gaskets, so they’re best for areas with high vibration.
For technical drawings and 3-D models, click on a part number.
Thread | Temperature, °F | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Tube OD | Dash Size | Size | Type | Thickness | Maximum Pressure, psi | Min. | Max. | Each | |
304 Stainless Steel | |||||||||
| 1/2" | 08 | 3/4"-16 | UN/UNF (JIC) | 0.26" | 20,000 | Not Rated | 2500° | 00000000 | 00000 |
Threadlocker-Coated 304 Stainless Steel—Orange | |||||||||
| 1/2" | 08 | 3/4"-16 | UN/UNF (JIC) | 0.26" | 20,000 | -40° | 300° | 00000000 | 0000 |
316 Stainless Steel | |||||||||
| 1/2" | 08 | 3/4"-16 | UN/UNF (JIC) | 0.26" | 20,000 | Not Rated | 2500° | 00000000 | 0000 |
Threadlocker-Coated 316 Stainless Steel—Black | |||||||||
| 1/2" | 08 | 3/4"-16 | UN/UNF (JIC) | 0.26" | 20,000 | -40° | 1200° | 00000000 | 0000 |
Threadlocker-Coated 316 Stainless Steel—Green | |||||||||
| 1/2" | 08 | 3/4"-16 | UN/UNF (JIC) | 0.26" | 20,000 | -40° | 300° | 00000000 | 0000 |
Aluminum | |||||||||
| 1/2" | 08 | 3/4"-16 | UN/UNF (JIC) | 0.26" | 3,000 | Not Rated | 1200° | 00000000 | 0000 |
Copper | |||||||||
| 1/2" | 08 | 3/4"-16 | UN/UNF (JIC) | 0.26" | 20,000 | -420° | 800° | 00000000 | 0000 |
Threadlocker-Coated Copper—Purple | |||||||||
| 1/2" | 08 | 3/4"-16 | UN/UNF (JIC) | 0.26" | 20,000 | -40° | 300° | 00000000 | 0000 |
Gaskets for 45° Flared Tube Fittings
Stop leaks from variations in temperature and vibration that can loosen 45° flared tube fittings. Made of copper, these gaskets are for use with brass fittings.
Threadlocker-coated gaskets offer a more secure hold than uncoated gaskets, so they’re best for areas with high vibration.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Tube OD | Dash Size | Size | Type | Thickness | Maximum Pressure, psi | Temperature Range, °F | Color | Each | |
Threadlocker-Coated Copper | |||||||||
| 5/8" | 10 | 7/8"-14 | UN/UNF (SAE 45°) | 0.26" | 20,000 | -40° to 300° | Purple | 0000000 | 00000 |
Fabric-Covered Multipurpose Neoprene Foam Sheets
Just like the material found in wetsuits, these neoprene foam sheets are encased in nylon fabric for additional protection from wear caused by rubbing and abrasion. Neoprene foam has good resistance to water, sunlight, and oxidation, and it resists swelling when it comes into contact with oil. This foam has closed-cell construction, which restricts water, air, and gases from being absorbed.
For technical drawings and 3-D models, click on a part number.
- Color: Black with Black Cover
- Temperature Range: 15° to 150° F
- Cell Type: Closed
- For Use Outdoors: Yes
- Density: 11 lbs./cu. ft.
- Pressure to Compress 25%: Not Rated
- Tensile Strength Rating: Good
- Oil-Resistance Rating: Good