These gaskets have a carbon steel outer ring and a 304 stainless steel inside sealing element with a PTFE filler that’s virtually chemically inert. They're also known as spiral-wound gaskets.

Instead of bolt holes, these gaskets have tines that easily fit around flange bolts to ensure they’re properly aligned with pipe openings. The tine design also means you won’t have to retorque the flange for alignment, saving time.

In addition to withstanding temperatures up to 450° F, these silicone rubber gaskets resist water and salts.

These blended carbon/Buna-N rubber gaskets are unaffected by oil and temperatures up to 650° F.

These gaskets are made from a blend of graphite and Buna-N rubber to withstand temperatures up to 650° F.

Furnished with enough nuts and bolts to create a connection between two steel pipe flanges.

Also known as Gore GR.

Made of soft expanded PTFE, these gaskets are reinforced with a stainless steel insert for added strength. They can hold their shape better than gaskets without an insert.

Reinforced with fiberglass filler for strength, these PTFE gaskets won't thin out when compressed.

Resistant to boric acid, citric acid, isopropyl alcohol, fuel, oil, and transmission fluid.

These neoprene gaskets also resist salts.

The all-SBR rubber construction of these gaskets provides better abrasion resistance than blended aramid/SBR gaskets.

Each gasket comes with enough bolts and nuts to create a connection between two steel pipe flanges.

The included plastic sleeves and washers provide a layer of protection against dielectric corrosion, which occurs when different metals are joined.

Aramid fibers are blended with SBR rubber to resist inert gases. These gaskets also resist abrasion.

Furnished with plastic sleeves and washers to provide a layer of protection against dielectric corrosion, which occurs when different metals are joined.

Also known as Gore GR.

Reinforced with a stainless steel insert, these gaskets are stronger and can hold their shape better than gaskets without an insert.

A fiberglass filler in these PTFE gaskets provides strength to prevent them from thinning out when compressed.

Resistant to water and salts, these silicone rubber gaskets can handle temperatures up to 450° F.

Carbon is blended with Buna-N rubber for gaskets that are unaffected by oil and temperatures up to 650° F.

Stronger and able to withstand higher pressures than other types of aramid/Buna-N.

Made of FDA-listed material for use with food and beverage.

This material is made with neoprene for resistance to refrigerants.

This paper-thin material is commonly used for light-duty gasketing.

For use in high-pressure applications up to 3,000 psi.

Also resistant to inert gases and abrasion, this material is made from blended aramid fiber/SBR rubber.

In addition to water and oil, this pliable leather gasket material resists salts, grease, and detergents.

Able to withstand pressure up to 10,000 psi, this is our highest pressure-rated gasket material. It handles temperatures up to 850° F.

In addition to withstanding temperatures up to 450° F, these silicone rubber gasket sheets resist water and salts.

In addition to handling temperatures up to 1800° F, this vermiculite material resists most acids, alkalies, and detergents.

Our highest temperature gasket material, this is made of high-alumina ceramic and can withstand temperatures up to 2600° F.

Made of FDA-listed material for use with food and beverage.

A fiberglass filler in this PTFE gasket material provides strength and prevents it from thinning out when compressed.

Made of FDA-listed material for use with food and beverage.

Fit these gaskets over connectors that plug in to your enclosure to absorb interference and prevent signal problems.

Made of vinyl rubber, these seals also resist salts and detergents. Hollow construction provides compressibility.

The hollow construction on these seals provides better compressibility than solid rubber seals. Made of silicone rubber, they also resist water and salts.

It’s the hollow construction that makes these seals more compressible than solid seals. Made of silicone foam rubber, they also resist water and salts.

Use these Viton® fluoroelastomer rubber seals with fuels and aggressive chemicals, such as petroleum oil, hydrofluoric acid, and propyl alcohol.

These seals have solid construction.

These hollow seals offer better compressibility than solid seals.

Hollow construction on these vinyl rubber seals provides better compressibility than seals with a foam core. They also resist salts and detergents.

Made of Viton® fluoroelastomer rubber, these seals stand up to fuels and aggressive chemicals, such as petroleum oil, hydrofluoric acid, and propyl alcohol.

These loosely-knitted fiberglass seals are more flexible and conformable than High-Temperature Slotted Edge Seals. They resist grease, oil, hydraulic fluid, and solvents and can withstand temperatures up to 1000° F.

These loosely knitted fiberglass seals are more flexible, compressible, and conformable than High-Temperature Rope Edge Seals.

Made of 96% silica, these seals resist temperatures up to 1800° F.

Alumina silicate is loosely woven to create these ceramic seals that are stronger and more flexible than Ultra High- and Low-Temperature Rope Seals. They can handle temperatures from –300° to 2300° F.

These seals have a strong Inconel core covered with woven silica yarn that’s been treated to withstand temperatures up to 2300° F. They resist most refrigerants, salts, and grease.

The PTFE coating on these fiberglass seals is slippery, so they are easier than the other seals to press fit into oven, furnace, and boiler doors. These seals resist steam, most refrigerants, salts, and grease. They can withstand temperatures up to 500° F.

In addition to having good resistance to water, sunlight, and oxidation, these neoprene foam sheets and strips resist swelling when they come into contact with oil.

Just like the material found in wetsuits, these neoprene foam sheets are encased in nylon fabric for additional protection from wear caused by rubbing and abrasion.

Because this natural rubber foam readily bounces back to shape after compression, it’s a good choice for repetitive sealing applications, such as on doors.

These vinyl foam sheets and strips are so conformable that once they're compressed they won't fully spring back. Use them to fill gaps and seal uneven surfaces.

These sheets and strips will bounce back to shape, even after extended compression.

Prevent the spread of flames with these self-extinguishing silicone foam sheets and strips.

A thin layer of aluminized fiberglass on this silicone foam reflects heat to protect sensitive equipment.

In addition to being lighter in weight than silicone foam, this polyimide foam also remains soft and conformable across a broader temperature range.

Even after extended compression, these high-performance polyurethane foam sheets and strips bounce back to shape faster than any other foam we offer. Also known as Poron urethane, they also stand up to wear caused by rubbing and scraping.

Good for tough vacuum-sealing and low closure-force applications, these polyurethane foam sheets and strips have open/closed cells to keep water, air, and gases from being absorbed when they are compressed at least 25%. Even after extended compression, all bounce back to shape faster than other foams we offer.

Often used for impact pads, gaskets, and enclosure seals, these polyurethane foam sheets and strips absorb shock better than other resilient foam.

Commonly called memory foam and Confor, these sheets and strips have the best cushioning qualities of all the foam we offer.

Made of FDA-listed materials, these polyethylene foam sheets are often used as packaging for food products to absorb shock and damp vibration.

Often used as padding in helmets, gloves, and boots, this super-strong EVA foam absorbs shock and resists tearing better than other types of foam.

There are hundreds of cushioning pillows in every foot of these pliable mesh sheets. They're often used as a protective liner in drawers and cabinets and anywhere a nonskid surface is required.

Also called plucking foam, these scored foam sheets allow you to pull out individual cubes for custom-shaped packaging.

Made of Epichlorohydrin, an alternative to Buna-N, these foam sheets have excellent resistance to oil.

An economical alternative to Viton® fluoroelastomer foam, these semi-rigid nylon foam sheets offer good resistance to a wide range of chemicals.

Protect electronic components from electrostatic shocks and chemicals while safeguarding them from bumps and drops during shipping and storing.

These polyurethane foam egg-crate sheets divert static electricity to protect sensitive equipment from damage.

This rubber has better shock absorbing qualities and will provide longer life than Standard Multipurpose Neoprene.

Stronger and more durable than High-Strength Multipurpose Neoprene, this rubber can handle high-tension applications such as belting.

This neoprene dissipates static electrical charge, which can damage or cause equipment to malfunction.

These sheets and strips have one layer of cotton/polyester fabric for every 1/16" of thickness, so they maintain their size and shape under heavy compression better than the standard nonreinforced multipurpose neoprene. Use them as gaskets.

Greater strength than standard High-Temperature Silicone translates into better shock-absorbing qualities and longer life.

Made of FDA-listed materials, these sheets and strips are for use with food.

One layer of fiberglass cloth is inserted between two layers of silicone rubber to give these sheets and strips the strength to stand up to high stress and flex. Use them as flange gaskets and anywhere heavy compression would squeeze nonreinforced silicone rubber out of place.

With greater strength than standard Weather-Resistant EPDM, these sheets and strips provide better shock-absorbing qualities and longer life.

A cross between plastic and rubber, Santoprene offers good resistance to weather and chemicals while retaining its stretchability.

These EPDM sheets and strips meet transportation industry standards for flammability, smoke, and toxicity. Use them as weather-resistant seals on windows and doors, pads to reduce vibration between panels, and exterior trim.

Even after repetitive compression, these super-soft sheets and strips maintain their cushioning ability. Use them to dampen noise and isolate vibration.

Use in food-processing environments for cutting surfaces, liners, and other high-wear applications. These sheets and strips are FDA compliant for direct contact with food.

With one layer of polyester fabric for every 1/16” of thickness, these sheets and strips maintain their size and shape under heavy compression better than the nonreinforced abrasion-resistant SBR.

These sheets and strips offer better shock-absorbing qualities and longer life than standard Oil-Resistant Buna-N.

The addition of vinyl make these sheets the strongest Food Industry Oil-Resistant rubber we offer. Use them for high-tension applications, such as belting. They’re made from FDA-listed materials for use with food and offer good resistance to animal and vegetable oils.