An SMC filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Wilkerson filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

An ARO filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Parker filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A filter, regulator, and lubricator with push-to-connect fittings are combined to provide clean, lubricated compressed air at your required pressure. Fittings make a tight seal around tubing.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A clear polyurethane bowl makes these filter/regulators chemical resistant for use with synthetic compressor oils and cleaning fluids and allows you to see inside to monitor contents.

Mount these filter/regulators to a 35 mm DIN rail with the included brackets.

No need for thread adapters—these filter/regulators have an NPT inlet and a BSPP outlet.

Connect SMC modular filter/regulator/lubricator components with the same series number.

Connect Norgren modular filter/regulator/lubricator components with the same series number.

Connect Parker modular filter/regulator/lubricator components with the same series number.

Swap out Norgren modular filter/regulator/lubricator components without unthreading your air line connections.

Swap out Festo modular filter/regulator/lubricator components without unthreading your air line connections.

Swap out SMC modular filter/regulator/lubricator components without unthreading your air line connections.

Prevent accidental start-up when servicing equipment.

Prevent accidental start-up when servicing equipment.

Prevent accidental start-up when servicing equipment.

Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up.

Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up.

Replace a damaged bowl, or change the bowl material or drain type on your SMC modular compressed air filter.

Replace a damaged bowl, or change the bowl material or drain type on your Parker modular compressed air filter.

Replace a damaged bowl, or change the drain type on your Festo modular compressed air filter.

Replace the filter element in your SMC modular compressed air filter to trap solid particles and water droplets as small as 5 microns.

Replace the filter element in your Norgren modular compressed air filter to trap solid particles and water droplets as small as 5 microns.

Replace the filter element in your Festo modular compressed air filter to trap solid particles and water droplets.

Replace the filter element in your Aventics modular compressed air filter to trap solid particles and water droplets.

Also known as coalescing filters, these filter elements fit in Wilkerson modular compressed air filters to remove oil and fine particles.

Also known as coalescing filters, these filter elements fit in Parker modular compressed air filters to remove oil and particles as small as 0.01 microns.

Also known as coalescing filters, these filter elements fit in Festo modular compressed air filters to remove oil and particles as small as 0.01 microns.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Use these filters where high water and dirt removal is needed—they have a two-layer filter element made of stainless steel wire mesh and cotton/polyester packing.

Get two stages of filtration—the first stage removes most particles and water droplets; the second captures any remaining particles and water droplets down to 5 microns.

Use these filters to extend the service life of air-powered tools and then throw them away when you're done.

Discharge up to 300 gallons of water and particles per hour—these filters handle compressed air that’s high in moisture content.

Assembled, inspected, and packaged in a clean environment, these filters come sealed in antistatic double bags.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Designed for use in main lines with high contamination, these filters remove oil to extend the service life of air-powered tools and equipment.

Mount these filters to a 35 mm DIN rail with the included brackets.

Housing and bowl are 316 stainless steel to handle extremely corrosive environments and meet NACE (National Association of Corrosion Engineers) specifications.

Use these filters in applications where high-quality air is critical. They remove particles down to 0.003 microns, eliminating small traces of oil vapor and its associated odor.

Replace failing or lost O-rings in SMC modular compressed air filters.

Replace failing or lost O-rings in Aventics modular compressed air filters.

Two-stage filtration is like getting two filters in one—the first stage removes large particles, while the second removes fine particles.

Produce clean air for instrumentation and other applications, such as food or medical device manufacturing.

Often used in medical device manufacturing and food-processing facilities, these filters have a stainless steel element that can be sterilized in an autoclave.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

A lower profile than our other compressed air regulators makes these regulators a better fit in tight spots.

Prevent unauthorized adjustment and unintentional pressure changes with these regulators.

Designed for installation directly to your air-powered tool, these regulators maintain the set air pressure.

Use these regulators to adjust and maintain the pressure of your tubing air lines.

With a greater flow capacity than our standard precision compressed air regulators, use these regulators to adjust and maintain air pressure in sensitive high-flow applications where constant, consistent pressure is important.

Fit these regulators in tight spaces to adjust and maintain air pressure in sensitive applications where constant, consistent pressure is important.

A pressure-calibrated dial allows for easy adjustments to outlet pressure in high-flow applications.

Keep an eye on the output pressure in high-flow applications—these regulators have a display so you can monitor your application locally.

View and control output pressure remotely and at the source.

Connect two or more of these manifold regulators to meet multiple pressure requirements from a single air supply—set a different output pressure with each regulator.

Use a single air supply to meet the pressure requirements of multiple applications—connect one of these manifolds to your air line, and then set a different output pressure for each station.

Add lubrication to your air supply to extend the service life of air-powered tools and equipment.

Add lubrication to your air supply to extend the service life of air-powered tools and equipment.

Add lubrication to your air supply to extend the service life of air-powered tools and equipment.

Add lubrication to your air supply to extend the service life of air-powered tools and equipment.

Replace a cracked or lost sight dome on your Parker modular compressed air lubricator.

Replace a cracked or lost sight dome on your Wilkerson modular compressed air lubricator.

Replace a damaged bowl, or change the bowl material on your SMC modular compressed air lubricator.

Replace a damaged bowl, or change the bowl material on your Parker modular compressed air lubricator.

Replace a damaged bowl, or change the bowl material on your Wilkerson modular compressed air lubricator.