These switches meet MIL-S-3950.

Able to withstand high currents, these switches are often used with motors and pumps.

Built into a terminal block, these switches mount to DIN rail.

These switches are protected from corrosion, high-temperature and high-pressure washdowns, and oil/coolant spraying. Install them in 22 mm dia. cutouts.

Prevent accidental actuation from bumps or vibration—these switches require you to grip and twist the lever to turn the switch. The contact block and actuator are all one piece, so they won’t separate in high-vibration applications.

Prevent accidental actuation from bumps or jostles—these switches require you grip and twist a lever to turn them on or off. Install them in 30 mm dia. cutouts.

Thanks to their ability to handle higher current than switches with contact blocks, these switches are often found in applications from large motors to warehouse lighting systems.

The enclosure not only protects these switches, but also adds options for how you install them.

The wide surface of these switches makes them easy to press on and off, even if your hands are full and you need to use an elbow.

Rated IP67, these switches are protected from temporary submersion.

Also known as high-inrush current switches, these switches can handle starting currents up to 10 times greater than their rating, such as when a motor starts.

Maximize space in a panel—these switches are smaller than most standard rocker switches.

Simple to use, these switches actuate with a quick push.

A durable rubber housing covers the buttons and protects these switches from impact.

These switches withstand temporary submersion.

Never worry about your pendant switch losing power. These pendant switches generate enough power from pushing the button to send a signal to a receiver up to 330 feet away.

Choose an actuator and contact block to make your own 22 mm plastic switch.

Choose an actuator and contact block to make your own 22 mm metal switch.

Control multiple devices with one switch. Turn the shaft to change switch positions.

To prevent accidental actuation and limit access to sensitive equipment, these switches require a key to turn circuits on or off. The contact block and actuator are all one piece, so they won’t separate in high-vibration applications.

These 16 mm switches require a key to turn circuits on or off, limiting access to sensitive equipment.