Housing is brass.

Measure tension force as well as weight.

Press the side of the gauge tip against an object to record the amount of tension required to move it.

Measure the tension of wire and filament without pausing your operation.

Use the included Windows-compatible software to upload measurement data.

Read tension and compression measurements with a glance—these gauges have three color-coded indicator lights to show you if a part is at your desired force. Red means the force is too high, orange means too low, and green is just right.

Safely view your tension force measurements on a handheld receiver up to 450 ft. away when moving bulk material with cranes and hoists.

Grip paper, film, and thin plastic.

A chuck-style grip with a round opening gets a secure hold on pins.

Often used on packaging films, food seals, and gloves, these tools test the puncture strength of thin materials.

Check that your products have the right balance of grip and slip. For quality control, these testers are commonly used to measure friction generated by packaging materials such as plastic film and cardboard.

Stress test an electrical connection to make sure it won't come apart.

Designed to test the pull and push force of springs, insert these testers into your quality control line right out of the box.

Calibrate these sensors to your desired capacity to measure tension, compression, or both. Also known as load cells, they measure and track the forces of your equipment by converting them into electrical signals.

Already calibrated, these sensors are ready to use right out of the box.

Thinner than a credit card, these force sensors fit into narrow spaces to measure the applied load between two surfaces.

Finger-tighten the three-jaw chuck onto a torque wrench or screwdriver, then twist either the gauge or tool to check the tool’s accuracy.

Accurate to within ±1%, these torque testers are often used to check the accuracy of torque wrenches and screwdrivers on assembly lines.

Measure the twisting force needed to tighten or loosen caps and knobs with these torque testers.

Calibrate torque-limiting power tools such as air-powered and impact drivers.

Make sure blades are straight between your guides.

Measure belt tension up to 2,200 lbs.