About Cam Latches and Locks
More
About Push-to-Close Latches
More
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Food Industry T-Handle Cam Latches
![](/prerenderstable/mvPRE/contents/gfx/imagecache/176/1762n11p1-h02d-digital@halfx_637014392411897583.png?ver=imagenotfound)
Designed for food-processing and hygienic applications, this corrosion-resistant latch is FDA compliant for direct food contact and DGUV tested to meet European regulations for use with food. It comes with one straight and two nonreversible offset cams to accommodate different latching distances.
For technical drawings and 3-D models, click on a part number.
Handle | Offset Cam | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance | For Through Hole Dia. | Lg. | Wd. | Projection | Lg. | Wd. | Seal Material | Mounting Fasteners Included | For Use On | Environmental Rating | Specifications Met | Each | |
316 Stainless Steel—Polished | ||||||||||||||
Quarter-Turn Clockwise to Open | ||||||||||||||
5/16" | 3/8", 11/16", 1 1/4" | 7/8" | 3 15/16" | 1 3/16" | 1 9/16" | 1 3/4" | 3/4" | Blue Silicone Rubber | Yes | Metal | IP65, IP67, IP69K | FDA Compliant 21 CFR 177.2600, DGUV GS-NV 2, DGUV GS-NV 6 | 0000000 | 000000 |
Food Industry L-Handle Cam Latches
![](/prerenderstable/mvPRE/contents/gfx/imagecache/176/1762n12p1-h02d-digital@halfx_637014251092298513.png?ver=imagenotfound)
Designed for food-processing and hygienic applications, this corrosion-resistant latch is FDA compliant for direct food contact and DGUV tested to meet European regulations for use with food. It comes with one straight and two nonreversible offset cams to accommodate different latching distances.
For technical drawings and 3-D models, click on a part number.
Handle | Offset Cam | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Latching Distance | For Through Hole Dia. | Lg. | Wd. | Projection | Lg. | Wd. | Seal Material | Mounting Fasteners Included | For Use On | Environmental Rating | Specifications Met | Each | |
316 Stainless Steel—Polished | ||||||||||||||
Quarter-Turn Clockwise to Open | ||||||||||||||
5/16" | 3/8", 11/16", 1 1/4" | 7/8" | 4 15/16" | 1 3/16" | 1 9/16" | 1 3/4" | 3/4" | Blue Silicone Rubber | Yes | Metal | IP65, IP67, IP69K | FDA Compliant 21 CFR 177.2600, DGUV GS-NV 2, DGUV GS-NV 6 | 0000000 | 000000 |
Food Industry Square-Drive Cam Locks
![](/prerenderstable/mvPRE/contents/gfx/imagecache/176/1766n11p1-h02d-digital@halfx_637014348434571920.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/176/1766n12p1-h02d-digital@halfx_637014354291793630.png?ver=imagenotfound)
Designed for food-processing and hygienic applications, this corrosion-resistant cam lock is made of FDA listed materials. It comes with a straight cam and two nonreversible offset cams to accommodate different latching distances.
Replacement keys are sold separately.
For technical drawings and 3-D models, click on a part number.
Locks | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Straight Cam | Offset Cam | Replacement Keys | ||||||||||||||
Square Size, mm | For Max. Thick. | Latching Distance | Key Number | For Through Hole Dia. | Head Dia. | Lg. | Wd. | Lg. | Wd. | Seal Material | Mounting Fasteners Included | Specifications Met | Each | Each | ||
303 Stainless Steel—Polished | ||||||||||||||||
Quarter-Turn Clockwise to Open | ||||||||||||||||
13 | 5/16" | 3/8", 11/16", 1 1/4" | SW13 | 7/8" | 1 3/16" | 1 3/4" | 3/4" | 1 3/4" | 3/4" | Blue Silicone Rubber | Yes | FDA Compliant 21 CFR 177.2600 | 0000000 | 000000 | 00000000 | 00000 |
316 Stainless Steel—Polished | ||||||||||||||||
Quarter-Turn Clockwise to Open | ||||||||||||||||
13 | 5/16" | 3/8", 11/16", 1 1/4" | SW13 | 7/8" | 1 3/16" | 1 3/4" | 3/4" | 1 3/4" | 3/4" | Blue Silicone Rubber | Yes | FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 | 0000000 | 0000 |
Food Industry Tight-Hold Triangle-Drive Cam Locks
![](/prerenderstable/mvPRE/contents/gfx/imagecache/494/4941n11-@halfx_af39f_1722029119.png?ver=imagenotfound)
Designed for food-processing and hygienic applications, these locks are FDA compliant for direct contact with food. They have a smooth finish and round edges, so there are no crevices for contaminants to collect in. A seal helps keep high-pressure, high-temperature washdowns and dust from entering through the lock. This helps you maintain an IP69K rating on sealed enclosures that are often used in food processing plants. Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal. Turn the head a quarter turn to lock, then turn it another quarter turn to create compression and minimize rattling from vibration.
Made of stainless steel, these locks won’t break down in areas that are constantly exposed to moisture. They include multiple cams, so you can change the fixed latching distance. Since you won’t have to adjust the cams into position, these are faster to install than those with an adjustable latching distance.
These locks open with a triangle key, so they're more secure than locks that open with a hex or slotted driver yet still match a common keying system for industrial enclosures and other machinery. They have a concealed design to stop others from tampering with them using pliers.
For technical drawings and 3-D models, click on a part number.
Locks | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Straight Cam | Offset Cam | Replacement Keys | ||||||||||||||
For Max. Thick. | Latching Distance | Triangle Size, mm | For Through Hole Dia. | Head Dia. | Lg. | Wd. | Lg. | Wd. | Seal Material | Mounting Fasteners Included | Environmental Rating | Specifications Met | Each | Each | ||
316 Stainless Steel | ||||||||||||||||
Half-Turn Counterclockwise to Open | ||||||||||||||||
5/16" | 3/8", 11/16", 1 1/4" | 8 | 7/8" | 1 3/16" | 1 3/4" | 3/4" | 1 3/4" | 3/4" | Blue Silicone Rubber | Yes | IP69K | EN 61373, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000000 | 0000000 | 00000 |
Food Industry Magnetic Latches
![](/prerenderstable/mvPRE/contents/gfx/imagecache/668/6680a21--98fe51d3bc1612363856-p9@halfx_637479390597037459.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/668/6680a45c1-1614263782-p9@halfx_637498389885642911.png?ver=imagenotfound)
Made to NSF/ANSI standards, this latch has a completely sealed magnet to eliminate crevices that can trap food particles. Magnetic force holds doors closed.
Note: Maximum pull-strength rating given is based on installation with the furnished strike plate; pull strength may be different based on the application.
For technical drawings and 3-D models, click on a part number.
Strike Plate | Mounting | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Pull Strength, lbs. | Ht. | Wd. | Dp. | Mounting Hole Ctr.-to-Ctr. | Mounting Hole Diameter, mm | Material | Ht. | Wd. | Mounting Hole Ctr.-to-Ctr. | Fasteners Included | Screw Size | Specifications Met | Each | ||
Light Gray Plastic | |||||||||||||||
1 | 3 | 9/16" | 2 1/2" | 3/4" | 2 1/16" | 4.2 | Stainless Steel | 5/8" | 1 15/16" | 1 9/16" | No | M4, No. 6 | NSF/ANSI 2 | 0000000 | 000000 |
1 | 7 | 9/16" | 2 1/2" | 3/4" | 2 1/16" | 4.2 | Stainless Steel | 5/8" | 1 15/16" | 1 9/16" | No | M4, No. 6 | NSF/ANSI 2 | 0000000 | 00000 |
1 | 11 | 9/16" | 2 1/2" | 3/4" | 2 1/16" | 4.2 | Stainless Steel | 5/8" | 1 15/16" | 1 9/16" | No | M3.5, No. 6 | NSF/ANSI 2 | 0000000 | 00000 |
Light Gray Rubber | |||||||||||||||
2 | 4 | 11/16" | 1 3/4" | 1/4" | 1 1/16" | 4.2 | Plastic | 11/16" | 1 3/4" | 1 3/16" | No | M4 | NSF/ANSI 2 | 0000000 | 00000 |
2 | 8 | 11/16" | 2" | 1/4" | 1 1/4" | 4.2 | Plastic | 11/16" | 1 3/4" | 1 3/16" | No | M4 | NSF/ANSI 2 | 0000000 | 00000 |
Dark Gray Rubber | |||||||||||||||
2 | 4 | 11/16" | 1 3/4" | 1/4" | 1 1/16" | 4.2 | Plastic | 11/16" | 1 3/4" | 1 3/16" | No | M4 | NSF/ANSI 2 | 0000000 | 00000 |
2 | 8 | 11/16" | 2" | 1/4" | 1 1/4" | 4.2 | Plastic | 11/16" | 1 3/4" | 1 3/16" | No | M4 | NSF/ANSI 2 | 0000000 | 00000 |
Blue Rubber | |||||||||||||||
2 | 4 | 11/16" | 1 3/4" | 1/4" | 1 1/16" | 4.2 | Plastic | 11/16" | 1 3/4" | 1 3/16" | No | M4 | NSF/ANSI 2 | 0000000 | 00000 |
2 | 8 | 11/16" | 2" | 1/4" | 1 1/4" | 4.2 | Plastic | 11/16" | 1 3/4" | 1 3/16" | No | M4 | NSF/ANSI 2 | 0000000 | 00000 |
Keyed Push-to-Close Locks with Handle
![](/prerenderstable/mvPRE/contents/gfx/imagecache/126/1266a7--2e19ab6106b1583160430-p9@halfx_637187356326441911.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/157/1576ac1-h02d-master1565818293-p9@halfx_637014321790687126.png?ver=imagenotfound)
Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame. They're keyed alike, choose them if you need several locks that open with the same key.
Locks have an adjustable strike plate to compensate for changes in offset caused by sagging doors and worn or flattened gaskets. Door offset is the space between the door face and the frame when the door is closed.
For technical drawings and 3-D models, click on a part number.
Mounting Hole Ctr.-to-Ctr. | Strike Plate Mounting Hole Ctr.-to-Ctr. | Mounting | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Door Offset | Lg. | Projection | (A) | (B) | (C) | (D) | (E) | (F) | Fasteners Included | Screw Size | Key Number | Number of Keys Included | Specifications Met | Each | |
Zinc—Dull | |||||||||||||||
-1/8" to 1/4" | 11 1/8" | 2 7/16" | 3 3/8" | 2 1/8" | 2 1/2" | 15/16" | 2 5/16" | 2 9/16" | No | 1/4" | 105 | 2 | NSF/ANSI 2 | 0000000 | 0000000 |
3/4" to 1 1/2" | 11 1/8" | 2 7/16" | 3 3/8" | 2 1/8" | 2 1/2" | 15/16" | 2 5/16" | 2 9/16" | No | 1/4" | 105 | 2 | NSF/ANSI 2 | 0000000 | 000000 |
Sanitary Twist-to-Lock Knob-Style Retractable Spring Plungers
![](/prerenderstable/mvPRE/contents/gfx/imagecache/971/97158a110multipositive_front_positive_top_standard15_1588769343_130@halfx_637243482034561669.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/971/97158a130multipositive_front_positive_top_standard15_1588769387_675@halfx_637243482329879041.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/spr/spring-plunger-1588853795-p9@halfx_637244326225525892.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/971/97158a150blue-medium-gloss-plasticpositive_top_positive_front_washer_1588769430_840@halfx_637243482580671180.png?ver=imagenotfound)
Quickly align, join, or hold machine components in place in food, pharmaceutical, and other sanitary environments. Pulling the plunger knob and twisting it 90° will lock the nose into its retracted position. All of these plungers have a long nose that offers a large bearing surface to handle side loads. They’re often used for maintenance jobs.
Made of stainless steel, these plungers won’t corrode from frequent washdowns with harsh cleaners and sanitizers. All are self-draining with rounded edges and polished surfaces, so there are no crevices for bacteria to grow, reducing the chance of a foodborne illness. Seals block out water and keep contaminants from getting trapped in threads or grooves. They’re also bright blue, so you can easily spot broken pieces that fall into your line. The seals are FDA compliant for direct contact with food, but the lubricant is rated for incidental contact.
Spring plungers with a sealing nut can be held in place with the nut after threading them to your desired depth. The nut completely covers the threads and has two seals to block out water and other contaminants.
Extended nose force is the force required to begin to depress the nose. Compressed nose force is the force required to depress the nose flush with the body. When using a plunger as a detent or stop, a lighter nose force with a shallower hole releases more easily, while a heavier force with a deeper hole holds more securely.
For technical drawings and 3-D models, click on a part number.
Thread | Nose | Nose Force, lbs. | Handle | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Pitch, mm | Lg., mm | Extended Lg., mm | Dia., mm | Extended | Compressed | Dia., mm | Texture | Includes | Locking Type | Body Lg., mm | Each | |
316 Stainless Steel Body and 316 Stainless Steel Nose | |||||||||||||
M12 | 1.5 | 12 | 6 | 6 | 4.5 | 8.1 | 35 | Smooth | __ | Without Thread Locker | 62 | 000000000 | 0000000 |
M14 | 1.5 | 12 | 6 | 6 | 4.5 | 8.1 | 35 | Smooth | Sealing Nut | Without Thread Locker | 72 | 000000000 | 000000 |
M14 | 1.5 | 12 | 8 | 8 | 5 | 7.2 | 35 | Smooth | Sealing Nut | Without Thread Locker | 77 | 000000000 | 000000 |
M16 | 1.5 | 12 | 8 | 8 | 5 | 7.2 | 35 | Smooth | __ | Without Thread Locker | 66 | 000000000 | 000000 |
Replacement Seal | 000000000 | Each | 00000 |
Cam-and-Groove Hose Couplings for Food and Beverage
![](/prerenderstable/mvPRE/contents/gfx/imagecache/911/91105k571--3a05dec73f41625057035-p9@halfx_637606358507125974.png?ver=imagenotfound)
Made of FDA listed materials, these couplings are suitable for food and beverage applications and won’t impart tastes or odors to the product. They also meet NSF/ANSI 61 safety standards for use with drinking water systems. A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug. Plugs and sockets are polypropylene, which is lightweight with good abrasion and corrosion resistance.
Plugs with male threaded end are also known as F adapters.
Plugs with female threaded end are also known as A adapters.
Plugs with barbed end are also known as E adapters. Insert the barbed end into rubber hose and secure with a clamp.
Sockets with male threaded end are also known as B couplers.
Sockets with female threaded end are also known as D couplers.
Sockets with barbed end are also known as C couplers. Insert the barbed end into hose and secure with a clamp.
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.
Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/911/91105k791p1-c01h-digitall@halfx_637084794296974170.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: 10° to 180° F
- Specifications Met: FDA Compliant 21 CFR 176.170
FDA Compliant 21 CFR 178.3297
NSF/ANSI 61
Coupling Size | Plug OD | Pipe Size | Thread Type | Color | Max. Pressure | Each | |
Polypropylene Plastic | |||||||
---|---|---|---|---|---|---|---|
3/4 | 1 1/4" | 1/2 | NPT | White | 125 psi @ 72° F | 000000000 | 00000 |
3/4 | 1 1/4" | 3/4 | NPT | White | 125 psi @ 72° F | 000000000 | 0000 |
1 | 1 7/16" | 1 | NPT | White | 125 psi @ 72° F | 000000000 | 0000 |
1 1/2 | 2 1/8" | 1 1/4 | NPT | White | 100 psi @ 72° F | 000000000 | 0000 |
1 1/2 | 2 1/8" | 1 1/2 | NPT | White | 100 psi @ 72° F | 00000000 | 0000 |
1 1/2 | 2 1/8" | 1 1/2 | BSPT | White | 100 psi @ 72° F | 000000000 | 00000 |
2 | 2 1/2" | 2 | NPT | White | 100 psi @ 72° F | 00000000 | 0000 |
2 | 2 1/2" | 2 | BSPT | White | 100 psi @ 72° F | 000000000 | 00000 |
3 | 3 5/8" | 3 | NPT | White | 50 psi @ 72° F | 00000000 | 00000 |
3 | 3 5/8" | 3 | BSPT | White | 50 psi @ 72° F | 000000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/911/91105k521p1-c01h-digitall@halfx_637084800102098337.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: 10° to 180° F
- Specifications Met: FDA Compliant 21 CFR 176.170
FDA Compliant 21 CFR 178.3297
NSF/ANSI 61
Coupling Size | Plug OD | Pipe Size | Thread Type | Color | Max. Pressure | Each | |
Polypropylene Plastic | |||||||
---|---|---|---|---|---|---|---|
3/4 | 1 1/4" | 1/2 | NPT | White | 125 psi @ 72° F | 000000000 | 00000 |
3/4 | 1 1/4" | 3/4 | NPT | White | 125 psi @ 72° F | 000000000 | 0000 |
1 | 1 7/16" | 1 | NPT | White | 125 psi @ 72° F | 000000000 | 0000 |
1 1/2 | 2 1/8" | 1 1/4 | NPT | White | 100 psi @ 72° F | 000000000 | 0000 |
1 1/2 | 2 1/8" | 1 1/2 | NPT | White | 100 psi @ 72° F | 00000000 | 0000 |
1 1/2 | 2 1/8" | 1 1/2 | BSPP | White | 100 psi @ 72° F | 000000000 | 00000 |
2 | 2 1/2" | 2 | NPT | White | 100 psi @ 72° F | 00000000 | 0000 |
2 | 2 1/2" | 2 | BSPP | White | 100 psi @ 72° F | 000000000 | 00000 |
3 | 3 5/8" | 3 | NPT | White | 50 psi @ 72° F | 00000000 | 00000 |
3 | 3 5/8" | 3 | BSPP | White | 50 psi @ 72° F | 000000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/911/91105k741p1-c01h-digitall@halfx_637084794542639698.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: 10° to 180° F
- Attachment Type: Use Worm-Drive Clamps or Band-and-Buckle Clamps
- Specifications Met: FDA Compliant 21 CFR 176.170
FDA Compliant 21 CFR 178.3297
NSF/ANSI 61
Coupling Size | Plug OD | For Hose ID | Color | Max. Pressure | Each | |
Polypropylene Plastic | ||||||
---|---|---|---|---|---|---|
3/4 | 1 1/4" | 1/2" | White | 125 psi @ 72° F | 000000000 | 00000 |
3/4 | 1 1/4" | 3/4" | White | 125 psi @ 72° F | 000000000 | 0000 |
1 | 1 7/16" | 1" | White | 125 psi @ 72° F | 000000000 | 0000 |
1 1/2 | 2 1/8" | 1 1/4" | White | 100 psi @ 72° F | 000000000 | 0000 |
1 1/2 | 2 1/8" | 1 1/2" | White | 100 psi @ 72° F | 00000000 | 0000 |
2 | 2 1/2" | 2" | White | 100 psi @ 72° F | 00000000 | 0000 |
3 | 3 5/8" | 3" | White | 50 psi @ 72° F | 00000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/911/91105k911p1-c01h-digitall@halfx_637084793297129503.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: 10° to 180° F
- Specifications Met: FDA Compliant 21 CFR 176.170
FDA Compliant 21 CFR 178.3297
NSF/ANSI 61
![](/prerenderstable/mvPRE/contents/gfx/imagecache/911/91105k571p1-c01h-digitall@halfx_637084793083253928.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: 10° to 180° F
- Specifications Met: FDA Compliant 21 CFR 176.170
FDA Compliant 21 CFR 178.3297
NSF/ANSI 61
Sockets | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | Protective Plugs | |||||||||||||
Coupling Size | Socket ID | Pipe Size | Thread Type | Color | No. of | Material | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Polypropylene Plastic | |||||||||||||||
3/4 | 1 1/4" | 1/2 | NPT | White | 2 | 304 Stainless Steel | Stainless Steel | 125 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 000000 | 000000 | 00 |
3/4 | 1 1/4" | 3/4 | NPT | White | 2 | 304 Stainless Steel | Stainless Steel | 125 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 00000 | 000000 | 00 |
1 | 1 7/16" | 1 | NPT | White | 2 | 304 Stainless Steel | Stainless Steel | 125 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 00000 | 000000 | 00 |
1 1/2 | 2 1/8" | 1 1/4 | NPT | White | 2 | 304 Stainless Steel | Stainless Steel | 100 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 00000 | 000000 | 00 |
1 1/2 | 2 1/8" | 1 1/2 | NPT | White | 2 | 304 Stainless Steel | Stainless Steel | 100 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000 | 00 |
1 1/2 | 2 1/8" | 1 1/2 | BSPT | White | 2 | 304 Stainless Steel | Stainless Steel | 100 psi @ 72° F | 000000000 | 00000 | __ | 000000 | 00 | 000000 | 00 |
2 | 2 1/2" | 2 | NPT | White | 2 | 304 Stainless Steel | Stainless Steel | 100 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 0000000 | 000000 |
2 | 2 1/2" | 2 | BSPT | White | 2 | 304 Stainless Steel | Stainless Steel | 100 psi @ 72° F | 000000000 | 00000 | __ | 000000 | 00 | 0000000 | 00000 |
3 | 3 5/8" | 3 | NPT | White | 2 | 304 Stainless Steel | Stainless Steel | 50 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 0000000 | 00000 |
3 | 3 5/8" | 3 | BSPT | White | 2 | 304 Stainless Steel | Stainless Steel | 50 psi @ 72° F | 000000000 | 00000 | __ | 000000 | 00 | 0000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/911/91105k681p1-c01h-digitall@halfx_637084792663395247.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: 10° to 180° F
- Specifications Met: FDA Compliant 21 CFR 176.170
FDA Compliant 21 CFR 178.3297
NSF/ANSI 61
Sockets | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | Protective Plugs | |||||||||||||
Coupling Size | Socket ID | Pipe Size | Thread Type | Color | No. of | Material | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Polypropylene Plastic | |||||||||||||||
3/4 | 1 1/4" | 1/2 | NPT | White | 2 | 304 Stainless Steel | Stainless Steel | 125 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 000000 | 000000 | 00 |
3/4 | 1 1/4" | 3/4 | NPT | White | 2 | 304 Stainless Steel | Stainless Steel | 125 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 00000 | 000000 | 00 |
1 | 1 7/16" | 1 | NPT | White | 2 | 304 Stainless Steel | Stainless Steel | 125 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 00000 | 000000 | 00 |
1 1/2 | 2 1/8" | 1 1/4 | NPT | White | 2 | 304 Stainless Steel | Stainless Steel | 100 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 00000 | 000000 | 00 |
1 1/2 | 2 1/8" | 1 1/2 | NPT | White | 2 | 304 Stainless Steel | Stainless Steel | 100 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000 | 00 |
1 1/2 | 2 1/8" | 1 1/2 | BSPP | White | 2 | 304 Stainless Steel | Stainless Steel | 100 psi @ 72° F | 000000000 | 00000 | __ | 000000 | 00 | 000000 | 00 |
2 | 2 1/2" | 2 | NPT | White | 2 | 304 Stainless Steel | Stainless Steel | 100 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 0000000 | 000000 |
2 | 2 1/2" | 2 | BSPP | White | 2 | 304 Stainless Steel | Stainless Steel | 100 psi @ 72° F | 000000000 | 00000 | __ | 000000 | 00 | 0000000 | 00000 |
3 | 3 5/8" | 3 | NPT | White | 2 | 304 Stainless Steel | Stainless Steel | 50 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 0000000 | 00000 |
3 | 3 5/8" | 3 | BSPP | White | 2 | 304 Stainless Steel | Stainless Steel | 50 psi @ 72° F | 000000000 | 00000 | __ | 000000 | 00 | 0000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/911/91105k631p1-c01h-digitall@halfx_637084792324378559.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: 10° to 180° F
- Attachment Type: Use Worm-Drive Clamps or Band-and-Buckle Clamps
- Specifications Met: FDA Compliant 21 CFR 176.170
FDA Compliant 21 CFR 178.3297
NSF/ANSI 61
Sockets | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | Protective Plugs | ||||||||||||
Coupling Size | Socket ID | For Hose ID | Color | No. of | Material | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | |||
Polypropylene Plastic | ||||||||||||||
3/4 | 1 1/4" | 1/2" | White | 2 | 304 Stainless Steel | Stainless Steel | 125 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 000000 | 000000 | 00 |
3/4 | 1 1/4" | 3/4" | White | 2 | 304 Stainless Steel | Stainless Steel | 125 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 00000 | 000000 | 00 |
1 | 1 7/16" | 1" | White | 2 | 304 Stainless Steel | Stainless Steel | 125 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 00000 | 000000 | 00 |
1 1/2 | 2 1/8" | 1 1/4" | White | 2 | 304 Stainless Steel | Stainless Steel | 100 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 00000 | 000000 | 00 |
1 1/2 | 2 1/8" | 1 1/2" | White | 2 | 304 Stainless Steel | Stainless Steel | 100 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 000000 | 00 |
2 | 2 1/2" | 2" | White | 2 | 304 Stainless Steel | Stainless Steel | 100 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 0000000 | 000000 |
3 | 3 5/8" | 3" | White | 2 | 304 Stainless Steel | Stainless Steel | 50 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 0000000 | 00000 |
![](/prerenderstable/mvPRE/contents/gfx/imagecache/911/91105k851p2-c01h-digitall@halfx_637084796874040741.png?ver=imagenotfound)
- Maximum Pressure: See table
- Temperature Range: 10° to 180° F
- Specifications Met: FDA Compliant 21 CFR 176.170
FDA Compliant 21 CFR 178.3297
NSF/ANSI 61
Sockets | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Levers | Replacement Gaskets | 6" Retaining Chains | 12" Retaining Chains | ||||||||||||
Coupling Size | Socket ID | Color | No. of | Material | Pull Ring Material | Max. Pressure | Each | Pkg. Qty. | Pkg. | Each | Each | ||||
Polypropylene Plastic | |||||||||||||||
3/4 | 1 1/4" | White | 2 | 304 Stainless Steel | Stainless Steel | 125 psi @ 72° F | 000000000 | 000000 | 10 | 0000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 |
1 | 1 7/16" | White | 2 | 304 Stainless Steel | Stainless Steel | 125 psi @ 72° F | 000000000 | 00000 | 10 | 0000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 |
1 1/2 | 2 1/8" | White | 2 | 304 Stainless Steel | Stainless Steel | 100 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 |
2 | 2 1/2" | White | 2 | 304 Stainless Steel | Stainless Steel | 100 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 |
3 | 3 5/8" | White | 2 | 304 Stainless Steel | Stainless Steel | 50 psi @ 72° F | 00000000 | 00000 | 10 | 0000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 |
Protective Plastic Plugs for Cam-and-Groove
Hose Sockets for Food and Beverage
![](/prerenderstable/mvPRE/contents/gfx/imagecache/572/5720n12-@halfx_esi06_1718991374.png?ver=imagenotfound)
A cap, bumper, and handle in one. Not only do these fittings seal your food or beverage line, they extend past the socket’s levers, so they take the brunt of damage from bumps and drops. Grab the handle to haul and maneuver your hose into place. Made of FDA listed materials, these plugs won’t impart tastes or odors to the product. To install, insert into your cam-and-groove socket and press its levers down.
For technical drawings and 3-D models, click on a part number.
Metal- and X-Ray-Detectable Pull-Tight Loop Tamper-Seal Tags
![](/prerenderstable/mvPRE/contents/gfx/imagecache/695/6957n21p1-n12-gray-@halfx_637347233634238201.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/695/6957n11p1-n12-gray-@halfx_637347234088924502.png?ver=imagenotfound)
Seal valves, latches, containers, and other devices with these traceable, tamper-evident tags, which are designed for food, pharmaceutical, and other sanitary environments. They contain metal and chemical additives that will set off metal detectors and show up on X-rays if any part of them falls into your line. Use them to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs to make sure contaminated food doesn’t leave your plant. Available in a variety of colors for color-coding the different lines and areas of your plant, they help you follow Good Manufacturing Practices (GMPs).
These tags cinch tight like cable ties and have a pull tab to remove them without tools. They’re stamped with the message "SEALED" and numbered sequentially, which helps you track if any tags have been tampered with. Not offered blank for security reasons.