A plastic-coated handle and hook prevents the release of particles from metal-to-metal contact, which makes these latches good for clean room applications.

These latches use downward compression to pull surfaces together for sealing gasketed doors.

These latches are typically used to secure hoods and covers.

Designed with compression springs to withstand vibration better than standard draw latches, these offer a more secure hold.

To prevent accidental opening, these latches have a safety catch.

Adjust the latching distance for a tight fit over gasketing and to compensate for misalignment.

A safety catch prevents accidental opening.

These latches hook into a lip or notch and have an adjustable latching distance to compensate for gasketing and misalignment.

Lift and turn the handle 180° to open and close these latches.

Draw lightweight surfaces together with these latches.

To secure overlapping components, pull the slide over the stud until they snap together. These latches resist shock and vibration.

Mount these latches on a corner to draw perpendicular surfaces together. They have a safety catch to prevent accidental opening.

An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.

For use on gasketed doors, these latches use downward compression to pull surfaces together. They have a safety catch to prevent accidental opening.

Add a padlock to secure these latches, which reach around corners to pull two surfaces together.

Lift and turn the handle 180° to open and close these latches. Add a padlock to secure.

Lift and turn the handle 180° to open and close this lock.

Secure cases, toolboxes, and other containers—these locks reach around outside corners to draw two surfaces together.

When not in use, fold the handle into the recess to keep it out of the way. Also known as compression cam locks, these locks create a tighter hold than traditional cam locks, making them useful for doors that have a seal.

Fold the ring handle into the recess to stay out of the way when not in use. Also known as compression cam latches, these latches create a tighter hold than traditional cam latches, making them useful for doors that have a seal.

To help maintain a sealed enclosure's IP65 and NEMA 4 rating, these locks have a gasket that prevents water from getting past the lock during low-pressure washdowns. Press the button to pop the handle out; push the handle shut for a secure hold. Since they lock with a hex key, these locks are great if you want to secure an enclosure with a simple keying system.

Help maintain your sealed enclosure’s IP65 and NEMA 4 ratings—these locks have a gasket that prevents water from getting past the lock during low-pressure washdowns. Press the button to pop the handle out; push the handle shut for a secure hold. These locks close with a slotted screwdriver, so they’re ideal for keeping a simple keying system.

Secure these locks with a Phillips screwdriver to keep a simple keying system around your facility. When you close them, a lever raises to tightly press your door or drawer shut with an attached screw.

Often installed on server cabinets and electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door. Choose these locks if you need several locks that open with the same key.

Fold the ring handle into the recess to stay out of the way when not in use. Also known as compression cam latches, these latches create a tighter hold than traditional cam latches, making them useful for doors that have a seal.

Prevent water, dust, and dirt from getting into a sealed enclosure through the latch. Press the button and the handle pops out; push the handle shut for a secure hold.

Fold the ring handle into the recess to stay out of the way when not in use.

Raise the handle and it swings smoothly for easy latching and unlatching.

Secure these locks with a three-number combination or a key. Often used on sealed server cabinets and electrical panels, they have a gasket that keeps low-pressure washdowns and dust from getting through the lock.

Help keep your sealed enclosure's contents safe from dust and water damage—these locks help maintain an enclosure's IP or NEMA rating for low- or high-pressure washdowns. Often installed on electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door.

Multiple gaskets help keep dust and high-pressure washdowns from entering through these latches. This helps you maintain your sealed enclosure's IP or NEMA rating. Often installed on server cabinets and electrical panels, these latches have a handle that swings smoothly when you lift it to latch and unlatch the door.

A slotted screwdriver opens and closes these locks, so you can avoid a complicated keying system. Often installed on server cabinets and electrical panels, they have a handle that swings smoothly when you lift it to latch and unlatch the door. Add a padlock for extra security.

Install these hasps over a cam lock and secure them with a padlock to increase security on cabinets and chests.

The steel housing conceals the mounting bolts and included padlock for extra security, preventing others from prying it open.

Quickly push these hasps closed to conveniently secure doors. They’re nonlocking, and there’s no opening for a padlock.

When released, the spring-loaded ring handle returns to its recessed position to stay out of the way.

A flat grip and recessed T-handle keep clothing and other objects from bumping or catching on these latches.