A large dial instead of a scale makes it easier to read the flow rate from a distance.

Measure the flow rate of liquids up to 212° F.

Check the flow rate of liquids up to 200° F from an easy-to-read digital display instead of a scale or dial.

To avoid metal contaminating liquids, such as deionized water, these flowmeters are made entirely of plastic and rubber.

Monitor the flow rate of liquids and use the integrated switch to turn equipment on and off, or activate an alarm when liquid reaches a set flow rate.

Easily install the unthreaded ends of these flowmeters into a PVC piping system.

Install these flowmeters in an instrument panel where they might be exposed to blows and other impact.

No need to disassemble your PVC pipeline—insert these flowmeters into a drilled hole and secure them using the included clamps.

With a spring piston instead of a float, these flowmeters measure the flow rate of oil in any mounting orientation.

Also known as magmeters, these transmitters use a magnetic field to measure flow rate and temperature with high accuracy.

Send flow rate and temperature measurements simultaneously to a programmable logic controller (PLC), data logger, or other receiving device.

Often used in low-flow metering applications for lubricants or antifreeze, these transmitters measure flow rate and send the data to a remote display or programmable logic controller (PLC).

Thread a ring fitting into your pipe connection and insert the probe of these transmitters to measure the flow and temperature of water, oil, or air.

Easy to remove for cleaning and maintenance, these flowmeter/totalizers connect to sanitary quick-clamp fittings (often called tri-clamp fittings) and measure the flow rate and volume of liquid passing through your system.

Using the flanged ends, securely install these flowmeter/totalizers in large, high-flow pipelines to measure the flow rate and total volume of liquid flowing through.

With one meter, these flowmeter/totalizers measure the flow rate and total flow volume of high-temperature liquid up to 200° F.

Meeting NSF/ANSI 61, these totalizers measure the cumulative amount of drinking water flowing through them.

Measure the total amount of liquid flowing through these totalizers.

A digital display makes it easy to check both the total amount of liquid that’s flowed through and the batch total.

Install this totalizer on your grease gun or valve to measure grease dispensing and reduce waste.

Track batches and the total amount of gasoline, diesel fuel, and kerosene passing through your system.

For monitoring flow at a glance, these switches have a plastic window with a rotor indicator that spins when there’s flow.

Accurate even in applications where pressure fluctuates regularly, these flow switches split flow into two paths and measure their difference in pressure drop to calculate the flow rate of liquid.

Quicker to install than adjustable flow switches in high-pressure lines, these switches come factory-set to activate or deactivate equipment at a specific level. They compensate for the viscosity and density changes of liquid.

Measure the flow rate of oil at pressures up to 3,600 psi to activate or deactivate equipment.

UL listed for use where flammable gases or combustible dusts may be present, these flow switches activate or deactivate equipment when your flow rate reaches a set point.