1 1/2 Pipe Size Flow Transmitters

Filter by

Pipe Size

Maximum Flow

Body Material

Calibrated With

For Use With

Flow Measurement Unit

Fitting Material

Output Signal Type

Flow Measurement Type

Wetted Parts Material

Minimum Flow

Measures

Maximum Pressure @ Temperature

Connects To

Digital Output Type

Seal Material

Communication Protocol

Environment

RoHS

REACH Compliance

DFARS Compliance

Mounting Position

Circuit Protection

Forward

How can we improve?

2 Products

Flow and Temperature Transmitters

Variable Area Flow

Measurement

Send flow rate and temperature measurements simultaneously to a programmable logic controller (PLC), data logger, or other receiving device. Used to monitor status or control equipment, these transmitters, also known as transducers, convert measurements to an electrical signal that is interpreted by receiving devices. As flow or temperature increases, the output signal increases. For your receiving device to interpret the signal, you will need to calibrate it for the measurement range and output signal of the transmitter. They only give accurate readings within the rated measurement range. Mount them inline with your pipe system. They’ll measure flow correctly in any mounting orientation.

A digital display makes it easy to view readings and adjust settings at the source. To change settings and receive error messages remotely from your PLC or computer, program one of the outputs to use IO Link. You’ll need an IO Link controller (not included) to connect to your interface.

Variable Area Flow Measurement—Variable-area transmitters determine the flow rate by tracking where the liquid pushes the piston. They have two configurable outputs. One can be wired as an analog output or a digital switch. The other one can be wired as a digital switch, digital pulse output, or IO Link. Pulse outputs send flow data using spikes of voltage that match the input voltage of the transmitter. The higher the flow, the more pulses they send. These transmitters are calibrated with water, glycol solutions, and coolants but can be recalibrated in the field for other liquids.

	End-to-End Lg.	Accuracy	Max. Pressure @ Temp.	Temp. Range, ° F	Seal Material	Input Voltage Range, V DC	Mounting Position	Field Recalibratable	Enclosure Rating		Each
One Digital Switch/Pulse Output and One 4-20 mA Analog Transmitter/Digital Switch Output—4-Pole Micro M12 Connection Plug





	316 Stainless Steel Body with 316 Stainless Steel Fitting
	Variable Area	1 1/2 NPT Female	60 to 3,000	6 3/16"	-5% to 5%	362 psi @ 70° F	14 to 212	Fluoroelastomer	18 to 30	Any Angle	Yes	IP65, IP67	0000000	0000000

High-Accuracy Flow and Temperature Transmitters

Also known as magmeters, these transmitters use a magnetic field to measure flow rate and temperature with high accuracy. Because they use a magnetic field, they only work with conductive liquids, such as water. These transmitters, also known as transducers, convert measurements to an electrical signal that can be interpreted by receiving devices, such as remote displays and programmable logic controllers (PLCs) to monitor flow or control equipment. For your receiving device to interpret the signal, you will need to calibrate it for the measurement range and output signal of the transmitter. As flow or temperature increases, the output signal increases. These transmitters have one analog output for flow and another for temperature. They only give accurate readings within the rated measurement range. A digital display makes it easy to view readings and adjust settings at the source. Mount these transmitters inline with your pipe system. They measure flow correctly in any mounting orientation.

These transmitters are calibrated with water. They can only be used with liquids with a conductivity of at least 20 µS/cm.

			Flow Range
	Flow Measurement Type	Pipe Connections	Gallons per Minute, gpm	Liters per Minute, L/min	End-to-End Lg.	Accuracy	Max. Pressure @ Temp.	Temp. Range, ° F	Input Voltage Range, V DC	Mounting Position	Field Recalibratable	Enclosure Rating		Each
Two 4-20 mA Analog Transmitter Outputs—4-Pole Micro M12 Connection Plugs





				316 Stainless Steel/Plastic/Polybutylene Body with 316 Stainless Steel Fitting
				Magnetic Induction	1 1/2 NPT Female	1.3 to 79.3	5 to 300	6 11/16"	-0.8% to 0.8%	225 psi @ 70° F	0 to 175	20 to 30	Any Angle	No	IP65, IP67	00000000	000000000