We will reply to your message within an hour.
Made of Buna-N rubber, these gaskets compress to ensure a tight seal. They resist oil, water, and salts.
The included plastic sleeves and washers provide a layer of protection against dielectric corrosion, which occurs when different metals are joined.
These blended aramid fiber/Buna-N rubber gaskets also resist water and aliphatic hydrocarbons such as ethylene.
Each gasket comes with enough bolts and nuts to create a connection between two steel pipe flanges.
Made of EPDM rubber, these gaskets also resist salt water.
Furnished with plastic sleeves and washers to provide a layer of protection against dielectric corrosion, which occurs when different metals are joined.
Aramid fibers are blended with SBR rubber to resist inert gases. These gaskets also resist abrasion.
Often called controlled swell gaskets, these gaskets absorb water near the inside of the flange and swell to fill gaps. Use them on uneven surfaces, such as grooved, corroded, or pitted flanges.
Also known as Gore GR.
Made of FDA-listed material for use with food and beverage.
Reinforced with a stainless steel insert, these gaskets are stronger and can hold their shape better than gaskets without an insert.
Form a seal even under the low torque needed for fiberglass flanges. Also known as Gore UPG, these gaskets are made from soft expanded PTFE.
Made of pure PTFE, these gaskets have a slippery surface that prevents sticking.
A fiberglass filler in these PTFE gaskets provides strength to prevent them from thinning out when compressed.
These gaskets resist boric acid, citric acid, isopropyl alcohol, fuel, oil, and transmission fluid.
Able to withstand temperatures up to 750° F, these graphite gaskets have a stainless steel insert for strength to handle pressure up to 1,000 psi.
Resistant to water and salts, these silicone rubber gaskets can handle temperatures up to 450° F.
Our highest temperature gaskets, these are made of vermiculite to withstand temperatures up to 1800° F.
Carbon is blended with Buna-N rubber for gaskets that are unaffected by oil and temperatures up to 650° F.
Made from a blend of graphite and Buna-N rubber, these gaskets withstand temperatures up to 650° F.