Bolt two same-size flanges together with a gasket to create an access point within a pipe line.

Use these heavy duty forged flanges for high-pressure applications.

Also known as Pressure Class 150 flanges, these corrosion-resistant flanges are designed for low-pressure pipe applications.

Even in temperatures as low as -46°, these A350 LF2 steel flanges won’t become brittle, so they absorb impact better than other low-pressure steel flanges.

Forged for extra strength, these heavy duty unthreaded flanges can withstand high-pressure applications.

These flanges are for low-pressure applications in noncorrosive environments.

The galvanized finish on these Pressure Class 150 flanges provides fair corrosion resistance.

Bolt two same-size flanges together with a gasket to create an access point within a line. They are also known as Pressure Class 150 flanges. They have thick, strong walls to handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation.

The flanged ends on these expansion joints rotate for easy bolt hole alignment during installation.

The PTFE body on these expansion joints has a super-smooth surface that stands up to corrosive chemicals.

These expansion joints have a double-bulb design for extra movement and vibration absorption.

Made of Buna-N rubber, these gaskets compress to ensure a tight seal. They resist oil, water, and salts.

These blended aramid fiber/Buna-N rubber gaskets also resist water and aliphatic hydrocarbons such as ethylene.

Made of EPDM rubber, these gaskets also resist salt water.

Also known as Gore GR.

Form a seal even under the low torque needed for fiberglass flanges. Also known as Gore UPG, these gaskets are made from soft expanded PTFE.

A fiberglass filler in these PTFE gaskets provides strength to prevent them from thinning out when compressed.

Able to withstand temperatures up to 750° F, these graphite gaskets have a stainless steel insert for strength to handle pressure up to 1,000 psi.

Carbon is blended with Buna-N rubber for gaskets that are unaffected by oil and temperatures up to 650° F.

Also known as spiral-wound gaskets, these have a carbon steel outer ring and a 304 stainless steel inner sealing element with a graphite-based filler.

A space between the outer ring and the sealing element prevents the element from being squeezed inward and contaminating the process line.

In addition to withstanding temperatures up to 450° F, these silicone rubber gaskets resist water and salts.

Also resistant to salt water.

Aramid fibers and SBR rubber are blended for resistance to water, inert gases, and abrasion.

These soft expanded PTFE gaskets are made of FDA-listed material for use with food and beverage.

Often used with fiberglass flanges where you want to avoid overtightening, these gaskets seal under low torque. They’re made of soft, expanded PTFE that is also known as Gore UPG.

A stainless steel insert in these PTFE gaskets adds strength and makes them reusable.

In addition to oil, these blended aramid fiber/Buna-N rubber gaskets resist water and aliphatic hydrocarbons such as ethylene.