Bolt two flanges of the same size together with a gasket to create an access point in a pipe line.

With thicker, stronger walls than our standard-wall butt-weld pipe fittings, these fittings stand up to your high strength applications.

Suitable for use in fire-protection applications, these flanges are brittle and can be quickly opened with the strike of a sledge hammer.

The flanged ends on these expansion joints rotate for easy bolt hole alignment during installation.

Made of Buna-N rubber, these gaskets compress to ensure a tight seal. They resist oil, water, and salts.

These blended aramid fiber/Buna-N rubber gaskets also resist water and aliphatic hydrocarbons such as ethylene.

Made of EPDM rubber, these gaskets also resist salt water.

Also known as Gore GR.

Form a seal even under the low torque needed for fiberglass flanges. Also known as Gore UPG, these gaskets are made from soft expanded PTFE.

A fiberglass filler in these PTFE gaskets provides strength to prevent them from thinning out when compressed.

Able to withstand temperatures up to 750° F, these graphite gaskets have a stainless steel insert for strength to handle pressure up to 1,000 psi.

Carbon is blended with Buna-N rubber for gaskets that are unaffected by oil and temperatures up to 650° F.

Also known as spiral-wound gaskets, these have a carbon steel outer ring and a 304 stainless steel inner sealing element with a graphite-based filler.

A space between the outer ring and the sealing element prevents the element from being squeezed inward and contaminating the process line.

In addition to withstanding temperatures up to 450° F, these silicone rubber gaskets resist water and salts.

Also resistant to salt water.

Aramid fibers and SBR rubber are blended for resistance to water, inert gases, and abrasion.

These soft expanded PTFE gaskets are made of FDA-listed material for use with food and beverage.

Often used with fiberglass flanges where you want to avoid overtightening, these gaskets seal under low torque. They’re made of soft, expanded PTFE that is also known as Gore UPG.

A stainless steel insert in these PTFE gaskets adds strength and makes them reusable.

In addition to oil, these blended aramid fiber/Buna-N rubber gaskets resist water and aliphatic hydrocarbons such as ethylene.