Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Also known as Schedule 10 fittings, these are thin, lightweight, and corrosion resistant.

Also known as Pressure Class 150 flanges, these corrosion-resistant flanges are designed for low-pressure pipe applications.

Also known as ANSI flanges.

Even in temperatures as low as -46°, these A350 LF2 steel flanges won’t become brittle, so they absorb impact better than other low-pressure steel flanges.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

With thicker, stronger walls than our standard-wall butt-weld pipe fittings, these fittings stand up to your high strength applications.

Access the inside of lines, so you can vent pressure, drain liquid, or take samples. Made of black-coated steel, these bleed rings should be used in dry environments to prevent rusting.

Use these fittings for low-pressure applications in noncorrosive environments.

Suitable for use in fire-protection applications, these flanges are brittle and can be quickly opened with the strike of a sledge hammer.

With better strength than our low-pressure steel flanges, these are for use in medium-pressure applications.

Also known as Pressure Class 1500 steel flanges, these have the strength to handle high pressures.

Use these unthreaded flanges in low-pressure applications. Also known as Pressure Class 125 flanges.

In addition to being lightweight, these aluminum fittings offer good corrosion resistance. Use them in low-pressure flow applications.

Use these fittings in low-pressure flow applications. They have good corrosion resistance.

Bolt two same-size flanges together with a gasket to create an access point within a line. They are also known as Pressure Class 150 flanges. Use in high-temperature plumbing and water supply applications up to 200° F.

The grooved ends on these flanges connect to pipe with a clamp, so you can access your chemical process line for routine maintenance. Flanges have excellent chemical resistance to withstand a variety of salt solutions, acids, and other harsh substances. They are also known as Victaulic flanges.

Bolt two same-size flanges together with a gasket to create an access point within a line. Flanges are an economical option for gravity-flow chemical waste systems. They are ABS plastic, which has excellent strength and impact resistance and good chemical resistance.

These all-metal expansion joints can handle high temperatures up to 800° F.

These expansion joints have a double-bulb design for extra movement and vibration absorption.

The EPDM lining in these joints meets NSF/ANSI 61 standard for use with drinking water.

Crimp these fittings to copper tubing with a crimping tool for a leak-tight connection that doesn’t require heat or soldering. They are comparable to Viega ProPress fittings.

Quickly connect and disconnect hose lines used with a variety of chemicals, from adhesives to isopropyl alcohol and ink. Any part of these couplings that contacts fluid is made from 316 stainless steel, C-276 Hastelloy, PTFE, or fluoroelastomer to withstand the chemicals in your line.

The included plastic sleeves and washers provide a layer of protection against dielectric corrosion, which occurs when different metals are joined.

Each gasket comes with enough bolts and nuts to create a connection between two steel pipe flanges.

Furnished with plastic sleeves and washers to provide a layer of protection against dielectric corrosion, which occurs when different metals are joined.

Often called controlled swell gaskets, these gaskets absorb water near the inside of the flange and swell to fill gaps. Use them on uneven surfaces, such as grooved, corroded, or pitted flanges.

Made of FDA-listed material for use with food and beverage.

Form a seal even under the low torque needed for fiberglass flanges. Also known as Gore UPG, these gaskets are made from soft expanded PTFE.

A fiberglass filler in these PTFE gaskets provides strength to prevent them from thinning out when compressed.

Resistant to water and salts, these silicone rubber gaskets can handle temperatures up to 450° F.

Carbon is blended with Buna-N rubber for gaskets that are unaffected by oil and temperatures up to 650° F.

Instead of bolt holes, these gaskets have tines that easily fit around flange bolts to ensure they’re properly aligned with pipe openings. The tine design also means you won’t have to retorque the flange for alignment, saving time.

Made of 110 copper, these gaskets handle steam applications up to 600° F. They are electrically conductive and resist water, Freon, and fuel oil.

Able to withstand temperatures up to 750° F, these graphite gaskets have a stainless steel insert for strength to handle pressure up to 1,000 psi.

These blended carbon/Buna-N rubber gaskets are unaffected by oil and temperatures up to 650° F.

These gaskets are made from a blend of graphite and Buna-N rubber to withstand temperatures up to 650° F.

Made of soft expanded PTFE, these gaskets are reinforced with a stainless steel insert for added strength. They can hold their shape better than gaskets without an insert.

Often used with fiberglass flanges where you want to avoid overtightening, these gaskets seal under low torque. They’re made of soft, expanded PTFE that is also known as Gore UPG.

These pure PTFE gaskets have a slippery surface that prevents sticking.

Resistant to boric acid, citric acid, isopropyl alcohol, fuel, oil, and transmission fluid.

The all-SBR rubber construction of these gaskets provides better abrasion resistance than blended aramid/SBR gaskets.

These neoprene gaskets also resist salts.

Furnished with enough nuts and bolts to create a connection between two steel pipe flanges.

Form a snug seal on grooved-end pipe fittings where water is a concern. Made of EPDM rubber, these gaskets won't break down from contact with water.