How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
High-Polish Metal Quick-Clamp Sanitary Tube Fittings
- Temperature Range: See Gaskets
The smooth finish inside these fittings makes it easy to remove product residue. Also known as aseptic and tri-clamp fittings, they connect with a gasket, a clamp, and another quick-clamp fitting for a fast and easy way to access your line. The pressure rating of the fitting will vary depending on the clamp you choose, and the temperature rating will vary based on the gasket material you choose.
316 stainless steel fittings have excellent corrosion resistance.
3-A certified fittings comply with sanitary standards.
Note: To complete a connection, you’ll need two quick-clamp fittings, a clamp, and a gasket (all sold separately).
For technical drawings and 3-D models, click on a part number.
- For Use With:
316/316L Stainless Steel: Air, Beverage, Water
316 Stainless Steel: Air, Beverage, Dairy, Food, Water - Tubing: Use with welded 304/304L or 316/316L stainless steel that meets ASTM A269 or ASTM 270
- Specifications Met: See Table
Fittings with bolt-on flange end connect to a same-size bolt-on flange with a gasket (sold separately) to create an access point within a line.
Recessed Nut, Hole for
Lockout, and 2-Pin Hinge
Clamps with wing nut tighten by hand. Clamps with bolt tighten with a wrench. They handle higher pressures than wing-nut clamps for a stronger, more secure hold.
For Tube OD | For Flange OD | Bolt Material | Max. Pressure | For Tube Specifications Met | Specifications Met | Each | |
304 Stainless Steel with Wing Nut | |||||||
---|---|---|---|---|---|---|---|
1", 1 1/4", 1 1/2" | 1.984" | __ | 500 psi @ 72 ° F | ASTM A269, ASTM A270 | __ | 00000000 | 000000 |
304 Stainless Steel with Wing Nut, Spring Loaded | |||||||
1", 1 1/4", 1 1/2" | 1.984" | __ | 500 psi @ 72 ° F | ASTM A269, ASTM A270 | __ | 0000000 | 00000 |
304 Stainless Steel with Bolt | |||||||
1", 1 1/4", 1 1/2" | 1.984" | 304 Stainless Steel | 1,500 psi @ 72 ° F | ASTM A269, ASTM A270 | __ | 00000000 | 00000 |
316 Stainless Steel with Wing Nut and 2-Pin Hinge | |||||||
1", 1 1/4", 1 1/2" | 1.984" | __ | 700 psi @ 72 ° F | __ | __ | 0000000 | 00000 |
316 Stainless Steel with Safety Wing Nut and 2-Pin Hinge | |||||||
1", 1 1/4", 1 1/2" | 1.984" | __ | 720 psi @ 72 ° F | __ | __ | 0000000 | 00000 |
316 Stainless Steel with Double Bolt | |||||||
1", 1 1/4", 1 1/2" | 1.984" | 316 Stainless Steel | 2,400 psi @ 72 ° F | __ | ASME BPVC.VIII | 0000000 | 000000 |
316 Stainless Steel with Recessed Nut, Hole for Lockout, and 2-Pin Hinge | |||||||
1", 1 1/4", 1 1/2" | 1.984" | __ | 720 psi @ 72 ° F | __ | __ | 0000000 | 00000 |
White Nylon Plastic with Wing Nut | |||||||
1", 1 1/4", 1 1/2" | 1.984" | __ | 150 psi @ 72 ° F | ASTM A269, ASTM A270 | __ | 00000000 | 00000 |
Buna-N gaskets are oil resistant. EPDM gaskets resist water and steam and work well in humid environments. Silicone gaskets withstand high temperatures. Fluoroelastomer gaskets stand up to fuel, oil, and acid condensates. PTFE gaskets withstand harsh chemicals, with the exception of molten alkali metal and elemental fluorine.
For Tube OD | ID | OD | Thick. | Temp. Range, °F | Color | Specifications Met | Each | |
Buna-N Rubber | ||||||||
---|---|---|---|---|---|---|---|---|
1" | 0.900" | 1.980" | 0.203" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
1 1/2" | 1.400" | 1.980" | 0.203" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 000 |
EPDM Rubber | ||||||||
1 1/2" | 1.400" | 1.980" | 0.203" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
Silicone Rubber | ||||||||
1" | 0.900" | 1.980" | 0.203" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
1 1/2" | 1.400" | 1.980" | 0.203" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
Fluoroelastomer Rubber | ||||||||
1" | 0.900" | 1.980" | 0.203" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
1 1/2" | 1.400" | 1.980" | 0.203" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
PTFE Plastic | ||||||||
1" | 0.900" | 1.980" | 0.203" | -100° to 500° | White | 3-A Certified 20-27, FDA Compliant 21 CFR 177.1550 | 00000000 | 0000 |
1 1/2" | 1.400" | 1.980" | 0.203" | -100° to 500° | White | 3-A Certified 20-27, FDA Compliant 21 CFR 177.1550 | 00000000 | 0000 |
Clamps for High-Polish Metal Quick-Clamp Sanitary Tube Fittings
- Temperature Range: See Gaskets or O-Rings
- Tubing:
Inch 304 Stainless Steel and Nylon Plastic: Use with welded 304/304L and 316/316L stainless steel that meets ASTM A269 or ASTM A270
Metric 304 Stainless Steel: Use with welded 304/304L and 316/316L stainless steel
Inch 316 Stainless Steel: Use with welded 304/304 L and 316/316L stainless steel
Metric 316 Stainless Steel: Use with welded 316/316L Stainless Steel
Connect quick-clamp sanitary tube fittings—also known as aseptic fittings—for a fast and easy way to access your line. Clamps with wing nut tighten by hand. Clamps with safety wing nut won’t release from minor loosening or jostling. They have a leak-before-burst design, which means they’ll leak to relieve pressure if the seal fails instead of bursting and causing a safety hazard.
Clamps with bolt tighten with a wrench. They handle higher pressures than wing-nut clamps for a stronger, more secure hold. Double-bolt clamps meet ASME design standards for pressure vessels.
Clamps with recessed nut require a hex socket adapter to loosen the nut, preventing the clamp from tampering and accidental removal. They have a hole for lockout (padlock not included) to block unauthorized access, helping you meet Hazard Analysis and Critical Control Point (HACCP) programs and Good Management Practices (GMP). Both of these security measures reduce the risk of product contamination. These clamps have a leak-before-burst design, so rather than burst dangerously if the seal fails, they’ll safely relieve pressure by dripping instead.
304 stainless steel clamps have very good corrosion resistance.
316 stainless steel clamps are more corrosion resistant than 304 stainless steel clamps. Clamps with two-pin hinge apply more even pressure on gaskets than other clamps, causing less wear and tear on gaskets.
Nylon clamps are lightweight compared to stainless steel clamps.
For technical drawings and 3-D models, click on a part number.
Recessed Nut, Hole for
Lockout, and 2-Pin Hinge
For Tube OD | For Flange OD | Max. Pressure | Specifications Met | Each | |
304 Stainless Steel with Wing Nut | |||||
---|---|---|---|---|---|
1", 1 1/4", 1 1/2" | 1.984" | 500 psi @ 72° F | __ | 00000000 | 000000 |
304 Stainless Steel with Wing Nut, Spring Loaded | |||||
1", 1 1/4", 1 1/2" | 1.984" | 500 psi @ 72° F | __ | 0000000 | 00000 |
304 Stainless Steel with Bolt | |||||
1", 1 1/4", 1 1/2" | 1.984" | 1,500 psi @ 72° F | __ | 00000000 | 00000 |
316 Stainless Steel with Wing Nut and 2-Pin Hinge | |||||
1", 1 1/4", 1 1/2" | 1.984" | 700 psi @ 72° F | __ | 0000000 | 00000 |
316 Stainless Steel with Safety Wing Nut and 2-Pin Hinge | |||||
1", 1 1/4", 1 1/2" | 1.984" | 720 psi @ 72° F | __ | 0000000 | 00000 |
316 Stainless Steel with Double Bolt | |||||
1", 1 1/4", 1 1/2" | 1.984" | 2,400 psi @ 72° F | ASME BPVC.VIII | 0000000 | 000000 |
316 Stainless Steel with Recessed Nut, Hole for Lockout, and 2-Pin Hinge | |||||
1", 1 1/4", 1 1/2" | 1.984" | 720 psi @ 72° F | __ | 0000000 | 00000 |
White Nylon Plastic with Wing Nut | |||||
1", 1 1/4", 1 1/2" | 1.984" | 150 psi @ 72° F | __ | 00000000 | 00000 |
The temperature rating of the fitting will vary depending on the gasket or O-ring material you choose. Buna-N is oil resistant. EPDM resists water and steam and works well in humid environments. Silicone withstands high temperatures. Fluoroelastomer stands up to fuel, oil, and acid condensates. PTFE withstands harsh chemicals, with the exception of molten alkali metal and elemental fluorine.
For Tube OD | ID | OD | Thick. | Temp. Range, °F | Color | Specifications Met | Each | |
Gaskets | ||||||||
---|---|---|---|---|---|---|---|---|
Buna-N Rubber | ||||||||
1" | 0.900" | 1.980" | 0.203" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
1 1/2" | 1.400" | 1.980" | 0.203" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 000 |
EPDM Rubber | ||||||||
1" | 0.900" | 1.980" | 0.203" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
1 1/2" | 1.400" | 1.980" | 0.203" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
Silicone Rubber | ||||||||
1" | 0.900" | 1.980" | 0.203" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
1 1/2" | 1.400" | 1.980" | 0.203" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
Fluoroelastomer Rubber | ||||||||
1" | 0.900" | 1.980" | 0.203" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
1 1/2" | 1.400" | 1.980" | 0.203" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
PTFE Plastic | ||||||||
1" | 0.900" | 1.980" | 0.203" | -100° to 500° | White | 3-A Certified 20-27, FDA Compliant 21 CFR 177.1550 | 00000000 | 0000 |
1 1/2" | 1.400" | 1.980" | 0.203" | -100° to 500° | White | 3-A Certified 20-27, FDA Compliant 21 CFR 177.1550 | 00000000 | 0000 |
Clamps for Plastic Quick-Clamp Sanitary Fittings for Stainless Steel Tubing
- For Use With: Dairy, Water
- Temperature Range: -40° F to 170° F
- Tubing: Use with welded 304/304L or 316/316L stainless steel that meets ASTM A269 or ASTM A270
- Specifications Met: 3-A Certified 62-02, FDA Compliant 21 CFR 177.2510
For technical drawings and 3-D models, click on a part number.
For Tube OD | For Flange OD | Material | Color | Max. Pressure | Each | |
1", 1 1/2" | 1.984" | PVDF Plastic | White | 120 psi @ 72° F | 0000000 | 000000 |
Clamps for Quick-Clamp Fittings for Dairy
- Temperature Range: 0° to 140° F
- Tubing: Use with soft (Durometer 50A-65A) silicone rubber
- Specifications Met: FDA Compliant 21 CFR 177.1500, USP Class VI
Use these clamps with quick-clamp fittings to quickly connect and disconnect your line as needed.
For technical drawings and 3-D models, click on a part number.
For Tube OD | For Flange OD | Material | Color | Max. Pressure | Each | |
1", 1 1/2" | 1.984" | Nylon Plastic | White | 80 psi @ 72° F | 0000000 | 000000 |
Sanitary Sampling Stainless Steel Tube Fittings
- For Use With: Dairy, Beverage, Water, Air, Food
- Tubing: Use with welded 316/316L stainless steel
- Specifications Met: 3-A Certified 63-03
Take samples in sanitary environments—these tube fittings won’t contaminate your lines or force you to pause them. Made of 316L stainless steel, they’ll stand up to harsh cleaners and sanitizers without corroding. They also have polished internal surfaces, minimizing the space where bacteria could grow. With quick-clamp connections, they are easy to take apart for cleaning or reconfiguring your line. All are 3-A certified to meet sanitary design standards, so they’re often used in food and beverage, pharmaceutical, and biotech applications.
All fittings require pierceable lids (sold separately) to draw samples through a hypodermic needle. Each lid is good for seven samples, and each sample leaves a hole mark, so you know when it’s time to unscrew the nut on the tube fitting and swap in a new lid. To help prevent dust and moisture from accumulating on the lid, all tube fittings have a dust cover. These lids are FDA compliant, so they keep contaminants from entering your line and also are approved for direct contact with food if they break off and fall in. Manufactured free of contaminants and allergens, all are BPA-, latex-, and phthalate-free. They’re also TSE/BSE compliant, meaning they’ve never come into contact with any animal products.
Pair these tube fittings with liquid samplers for a sample. They use gravity to draw out liquid through the needle directly into the bag.
For technical drawings and 3-D models, click on a part number.
Bag | Needle | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity, ml | Ht. | Wd. | Thick., mil | Gauge | Lg. | ID | OD | Material | Connection Type | Color | Specifications Met | Each | |
PVC Plastic | |||||||||||||
250 | 8" | 5" | 14 | 18 | 1 1/2" | 0.033" | 0.05" | 304 Stainless Steel | Luer Lock | Clear | ISO 10993, USP Class VI | 0000000 | 00000 |
2,000 | 14" | 7" | 14 | 18 | 1 1/2" | 0.033" | 0.05" | 304 Stainless Steel | Luer Lock | Clear | ISO 10993, USP Class VI | 0000000 | 0000 |