A self-closing faucet provides controlled, one-handed dispensing of flammable liquids. These safety cans also have a flame arrester and a self-closing pressure-relief cap.

Powder-coated steel cans are for petroleum-based liquids.

Polyethylene plastic cans are for chemicals and corrosives.

Stainless steel cans are corrosion resistant and often used with liquids such as acetone, ether, toluene, and xylene.

Tip cans down for controlled dispensing, then swing them back to their upright position. These cans have a pressure-relief cap with built-in vacuum-release valve for controlled pouring.

Powder-coated steel can is for petroleum-based liquids.

Polyethylene plastic can is for chemicals and corrosives.

Also known as Type II safety cans, these have two openings—one for filling, one for pouring. Safety cans are a safer choice than fuel cans for storing flammable liquids. They have a spring-loaded, self-closing lid; pressure-relief cap; flame arrester; and a vacuum-release valve for controlled pouring.

Color-coding typically indicates usage: red for gasoline, yellow for diesel, blue for kerosene, and green for other liquids.

Style B have a steel roll bar that protects the spout, handle, and trigger during transport.

Style C have a rotating spout that flips down for pouring and up for storage.

Carry and store petroleum-based liquids in these sturdy cans. Color-coding indicates usage: red for gasoline, yellow for diesel, and blue for kerosene. The spout automatically closes to prevent spills. Push the button to pour.

Store leftover hazardous liquids until they can be properly discarded. The spring-loaded, self-closing cap on these cans automatically vents to relieve excess vapor pressure, and a flame arrester protects against outside ignition.

Plastic cans are for aggressive chemicals and corrosives.

316 stainless steel cans are for liquids such as acetone, alcohol, ether, toluene, and xylene.

Galvanized steel cans are for petroleum-based liquids.

Easily fill these cans through the detachable wide-mouth funnel, then remove the threaded plug to empty. A flame arrester protects against outside ignition.

Mix and store noncorrosive flammable liquids, such as paints and lacquers. This pail has a flame arrester to protect against outside ignition and a grounding tab to reduce static electricity buildup.

Turn these bottles upside down and press the flange to dispense.

Dispense flammable liquids with these FM-approved push-top dispensers. Excess liquid drains back into the dispenser through a mesh flame-arrester plate.

For technical drawings and 3-D models, click on a part number.

Often used in laboratories, these dispensers fit on most lab bottles. Push down on the top to dispense precise amounts of acids, solvents, and other liquids.

For technical drawings and 3-D models, click on a part number.