We will reply to your message within an hour.
Bend this hose in any direction and it won’t kink, even when routed through tight spaces.
Also known as pin-rack hose, this hose can be folded to fit in a rack.
Differentiate your hose by color. The abrasion-resistant polyester cover on this hose comes in red, white, or yellow.
Lightweight yet tough, this hose has an abrasion-resistant polyester cover.
To stand up to the harsh chemicals used to clean food-processing lines, these fittings are made of PVDF, also known as Kynar.
This tubing won’t degrade when exposed to the damaging effects of UV light.
This self-extinguishing tubing meets UL 94 V-0 and UL 94 V-1 for flame retardance, so it delays the spread of flames to valuable equipment.
Designed for use in welding applications, this tubing has multiple layers of material and is specially formulated to self-extinguish.
This self-extinguishing tubing meets UL 94 V-0 or UL 94 V-2 for flame retardance to delay the spread of flames to valuable equipment.
The industry standard for general purpose food, beverage, and dairy applications, this tubing meets NSF/ANSI Standard 51 for food contact.
Ultraviolet light won’t cause this tubing to degrade or deteriorate.
Run chemicals through this tubing at temperatures between -100° F and 500° F.
Not only can this tubing handle temperatures between -450° F and 500° F, it also has a convoluted spiral design for good flexibility and smooth flow.
This durable tubing has the best abrasion and wear resistance of all our hard tubing for chemicals.
Keep your work site safe and clutter free—this coiled tubing extends when you need it and retracts out of the way when you don't.
With hard walls and the ability to handle extreme temperatures, this tubing is the preferred material for semiconductor applications. The material contains extremely low levels of additives, so it won’t contaminate the fluid passing through it.
Designed for high-purity applications, this hard tubing is cleaned and bagged to prevent dirt and moisture from contaminating the inside. It is free of plasticizers like DEHP, so it won’t impart tastes or odors to the fluid running through it.
Combining the heat resistance of metal with the flexibility of fabric, this fiberglass hose has a special coating that stands up to high temperatures.
Not only does this hose stand up to corrosive fumes, it has a metal spiral on the outside that acts as a wear strip to protect against damage.
Rugged, yet pliable PVC makes this a good general purpose hose for venting smoke, propane fumes, and water-based paint fumes.
With the smallest bend radius of all the fume hose we offer, this lightweight hose can handle tight turns around equipment.
Let go of this hose and it will spring back out of your way.
A good general purpose hose for blowing and vacuum applications, this hose is for use with grinding dust, sawdust, and lint.
The neoprene coating on this hose holds up under high heat.
Surrounded by a protective plastic spiral, this hose bounces back to its original shape when stepped on and resists wear from being dragged across rough floors.
This general purpose hose for blowing and vacuum applications has a thick PVC wear strip that protects against damage caused by dragging.
In addition to offering excellent abrasion resistance, this hose meets UL 94 HB for flame retardance.
The small bend radius makes this hose easy to wrap around corners and install in tight spaces.
The neoprene coating on this hose contains carbon to dissipate static when hose is installed in a grounded system.
A thick layer of PVC with a metal spiral lets this hose handle particles heavier than dust, including cardboard fibers.
The neoprene coating on this hose withstands continuous motion without weakening.
Hose meets UL 94 V-2 for flame retardance.
The ends of this hose have a belt-and-buckle connection that eliminates the need for clamps.
An acrylic coating allows this polyester hose to hold up under higher temperatures than other fabric hose.
A layer of fiberglass insulation helps maintain the temperature inside the hose. Use for heating and cooling applications in outdoor environments.
Our most versatile duct hose for blowing and venting air, this polyester hose is lightweight and very flexible.
A general purpose duct hose for blowing and venting air, this polyester hose is lightweight and has a wear strip to protect against damage.
This sleeving withstands temperatures up to 390°F and is often used to insulate connections in transformers and relays. It prevents electricity and heat from dissipating from wire and cable.
Add a layer of insulation to prevent electricity and heat from dissipating from wire and cable.
Made of PVC, this sleeving resists chemicals, oil, and acids.
Use this PTFE sleeving in applications where temperatures reach up to 500° F.
Protect cable, hose, and pipe in high temperature environments—this sleeving withstands temperatures over 450° F. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.
Tested to meet MIL-STD-202, this sleeving meets performance standards for flame retardance. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.
Rated UL 2024 and NFPA 262, this sleeving is approved for use in plenum spaces such as duct work and above a drop ceiling. It self-extinguishes and emits minimal amounts of smoke and gas during combustion. Stretch to fit over items for easy installation; it tightens around its contents for a secure fit.
Rated UL 94 V-2, this sleeving resists combustion and minimizes the spread of flames. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them. It has impact and abrasion resistance similar to conduit, with more flexibility.
The tightly braided construction makes this polyester sleeving abrasion resistant. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.
Use this shielded sleeving to protect wire and cable from signal distortion caused by nearby equipment and devices. It has a slit along the entire length so it easily wraps around wire and cable without disconnecting them.
Coated with PVC, this polyester sleeving resists chemicals and solvents. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.
Flame rated VW-1, you can safely use this sleeving on wiring in multi-level facilities as well as in industrial machinery and vehicles. A hook and loop strip along its length makes it easy to wrap around components without disconnecting them and easy to open at any point to access them.
Made of PTFE, this sleeving has excellent resistance to chemicals and acids. A reusable alternative to tape and cable ties, it allows you to route wire and cable between the spirals.
Protect cables, cords, and wire and form them into bundles in your food-processing plant while lowering the risk of contaminating the food.
With a unique overlapping link structure, you can open and close this sleeving like a zipper using the included tool. The tool’s open design and the slots in the sleeving make it easy to branch off wires from your bundle as you’re zipping it shut.
Attach conduit to a knockout in an outlet box or enclosure.
Connect different sizes of conduit.
Join pieces of conduit.
Make tight bends in machine and equipment wiring.
Thicker corrugations make this conduit more crush resistant than standard flexible plastic conduit.
Covered with a copper braid, this conduit protects wire and cable from electromagnetic interference (EMI) caused by motors and other equipment.
Use this general purpose tubing to insulate and protect wire and cable.
Often used in automated applications such as robotics, this highly flexible silicone rubber tubing withstands continuous motion without cracking and tearing. It resists abrasion and can be dragged over rough surfaces without damage.
Use this tubing where wire and cable may be exposed to chemicals, oil, and acids.
Often used to bundle batteries, capacitors, and other electronics, this tubing tightly conforms to objects, similar to shrink wrap. It has excellent resistance to chemicals, oil, and acids.
With excellent resistance to tears and cuts, this tubing withstands demanding use.
Made of PVDF, this tubing has excellent cut and abrasion resistance. It has a flame-retardant additive that resists combustion and minimizes the spread of flames.
Also known as halogen-free tubing, this tubing produces minimal amounts of smoke and gas if exposed to an open flame, so it can be used in enclosed areas such as ships and tunnels.
Insulate and protect high-voltage devices. This tubing withstands higher voltages than standard heat-shrink tubing because it’s made of a flame-retardant material with excellent electrical insulation properties.