We will reply to your message within an hour.
This self-extinguishing tubing meets UL 94 V-0 or UL 94 V-2 for flame retardance to delay the spread of flames to valuable equipment.
This self-extinguishing tubing meets UL 94 V-0 and UL 94 V-1 for flame retardance, so it delays the spread of flames to valuable equipment.
This tubing won’t degrade when exposed to the damaging effects of UV light.
Designed for use in welding applications, this tubing has multiple layers of material and is specially formulated to self-extinguish.
With excellent resistance to abrasion and tearing, this tubing can hold up in rugged environments.
Run chemicals through this tubing at temperatures between -100° F and 500° F.
Not only can this tubing handle temperatures between -450° F and 500° F, it also has a convoluted spiral design for good flexibility and smooth flow.
Ultraviolet light won’t cause this tubing to degrade or deteriorate.
Keep your work site safe and clutter free—this coiled tubing extends when you need it and retracts out of the way when you don't.
This durable tubing has the best abrasion and wear resistance of all our hard tubing for chemicals.
The industry standard for general purpose food, beverage, and dairy applications, this tubing meets NSF/ANSI Standard 51 for food contact.
With hard walls and the ability to handle extreme temperatures, this tubing is the preferred material for semiconductor applications. The material contains extremely low levels of additives, so it won’t contaminate the fluid passing through it.
Designed for high-purity applications, this hard tubing is cleaned and bagged to prevent dirt and moisture from contaminating the inside. It is free of plasticizers like DEHP, so it won’t impart tastes or odors to the fluid running through it.
Often used in heating and cooling systems, this tubing insulates refrigerant to efficiently transfer heat between components.
This tubing has special markings to identify it as a gas line.
Surrounded by a protective plastic spiral, this hose bounces back to its original shape when stepped on and resists wear from being dragged across rough floors.
The neoprene coating on this hose holds up under high heat.
In addition to offering excellent abrasion resistance, this hose meets UL 94 HB for flame retardance.
This general purpose hose for blowing and vacuum applications has a thick PVC wear strip that protects against damage caused by dragging.
A good general purpose hose for blowing and vacuum applications, this hose is for use with grinding dust, sawdust, and lint.
The neoprene coating on this hose contains carbon to dissipate static when hose is installed in a grounded system.
The small bend radius makes this hose easy to wrap around corners and install in tight spaces.
Not only does this hose stand up to corrosive fumes, it has a metal spiral on the outside that acts as a wear strip to protect against damage.
Combining the heat resistance of metal with the flexibility of fabric, this fiberglass hose has a special coating that stands up to high temperatures.
Hose has a single thin layer of PVC-coated fiberglass for venting smoke, water-based paint fumes, and welding fumes.
With the smallest bend radius of all the fume hose we offer, this lightweight hose can handle tight turns around equipment.
Let go of this hose and it will spring back out of your way.
Rugged, yet pliable PVC makes this a good general purpose hose for venting smoke, propane fumes, and water-based paint fumes.
A thick layer of PVC with a metal spiral lets this hose handle particles heavier than dust, including cardboard fibers.
Hose meets UL 94 V-2 for flame retardance.
The neoprene coating on this hose withstands continuous motion without weakening.
A general purpose duct hose for blowing and venting air, this polyester hose is lightweight and has a wear strip to protect against damage.
Insulated with a layer of fiberglass, this ultra-thin lightweight hose keeps air at a constant temperature.
An acrylic coating allows this polyester hose to hold up under higher temperatures than other fabric hose.
Our most versatile duct hose for blowing and venting air, this polyester hose is lightweight and very flexible.
A layer of fiberglass insulation helps maintain the temperature inside the hose. Use for heating and cooling applications in outdoor environments.
Bend this hose into position in heating and cooling applications where it’s important to maintain the temperature of the air inside the hose.
The ends of this hose have a belt-and-buckle connection that eliminates the need for clamps.
The most compressible hose we offer, this duct hose collapses to 5% of its length for easy storage.
Pipe meets UL 94 V-0 for flame retardance to delay the spread of flames to valuable equipment. It is made of PVDF, which is comparable to Kynar, and has the chemical resistance to stand up to solvents and other harsh substances.
Bolt two same-size flanges together with a gasket to create an access point within a line. Flanges meet UL 94 V-0 for flame retardance to delay the spread of flames to valuable equipment. They are PVDF, which is comparable to Kynar, and has the chemical resistance to stand up to solvents and other harsh substances. Also known as Pressure Class 150 flanges.
These PVDF fittings meet UL 94 V-0 for flame retardance, so they delay the spread of flames to valuable equipment. PVDF is comparable to Kynar, and has the chemical resistance to stand up to solvents and other harsh substances.
Use this pipe in gravity-flow applications that involve highly-corrosive chemicals–it is NSF certified for use in corrosive waste systems. Pipe is made of CPVC, which has better chemical resistance than ABS plastic to stand up to acids and other harsh substances.
Made of polypropylene, these gravity-flow fittings withstand organic solvents, such as acetone, that would dissolve CPVC pipe. They also stand up to highly corrosive acids, such as hydrochloric acid, and alkalies.
Made of polypropylene, this gravity-flow pipe stands up to tough organic solvents, such as acetone, that would dissolve CPVC pipe. You can also use it for lines with highly corrosive acids, such as hydrochloric acid, and alkalies.
These fittings are NSF certified for use in corrosive waste gravity-flow systems. Made of CPVC, they have better chemical resistance than ABS plastic gravity-flow fittings and can stand up to highly-corrosive acids and other harsh substances.
Bend this hose in any direction and it won’t kink, even when routed through tight spaces.
Lightweight yet tough, this hose has an abrasion-resistant polyester cover.
Differentiate your hose by color. The abrasion-resistant polyester cover on this hose comes in red, white, or yellow.
Two heavy duty polyester covers protect this hose.
Also known as pin-rack hose, this hose can be folded to fit in a rack.
Use this PTFE sleeving in applications where temperatures reach up to 500° F.
Add a layer of insulation to prevent electricity and heat from dissipating from wire and cable.
This sleeving withstands temperatures up to 390°F and is often used to insulate connections in transformers and relays. It prevents electricity and heat from dissipating from wire and cable.
Made of PVC, this sleeving resists chemicals, oil, and acids.
Protect cable, hose, and pipe in high temperature environments—this sleeving withstands temperatures over 450° F. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.
Tested to meet MIL-STD-202, this sleeving meets performance standards for flame retardance. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.
Rated UL 2024 and NFPA 262, this sleeving is approved for use in plenum spaces such as duct work and above a drop ceiling. It self-extinguishes and emits minimal amounts of smoke and gas during combustion. Stretch to fit over items for easy installation; it tightens around its contents for a secure fit.
Rated UL 94 V-2, this sleeving resists combustion and minimizes the spread of flames. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them. It has impact and abrasion resistance similar to conduit, with more flexibility.
Coated with PVC, this polyester sleeving resists chemicals and solvents. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.
The tightly braided construction makes this polyester sleeving abrasion resistant. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.
With a unique overlapping link structure, you can open and close this sleeving like a zipper using the included tool. The tool’s open design and the slots in the sleeving make it easy to branch off wires from your bundle as you’re zipping it shut.
Flame rated VW-1, you can safely use this sleeving on wiring in multi-level facilities as well as in industrial machinery and vehicles. A hook and loop strip along its length makes it easy to wrap around components without disconnecting them and easy to open at any point to access them.
Use this shielded sleeving to protect wire and cable from signal distortion caused by nearby equipment and devices. It has a slit along the entire length so it easily wraps around wire and cable without disconnecting them.
Protect cables, cords, and wire and form them into bundles in your food-processing plant while lowering the risk of contaminating the food.
Made of PTFE, this sleeving has excellent resistance to chemicals and acids. A reusable alternative to tape and cable ties, it allows you to route wire and cable between the spirals.
Made of PVDF, this tubing has excellent cut and abrasion resistance. It has a flame-retardant additive that resists combustion and minimizes the spread of flames.
Also known as halogen-free tubing, this tubing produces minimal amounts of smoke and gas if exposed to an open flame, so it can be used in enclosed areas such as ships and tunnels.
With excellent resistance to tears and cuts, this tubing withstands demanding use.
Insulate and protect high-voltage devices. This tubing withstands higher voltages than standard heat-shrink tubing because it’s made of a flame-retardant material with excellent electrical insulation properties.
Often used to bundle batteries, capacitors, and other electronics, this tubing tightly conforms to objects, similar to shrink wrap. It has excellent resistance to chemicals, oil, and acids.
Often used in automated applications such as robotics, this highly flexible silicone rubber tubing withstands continuous motion without cracking and tearing. It resists abrasion and can be dragged over rough surfaces without damage.
Use this general purpose tubing to insulate and protect wire and cable.
Use this tubing where wire and cable may be exposed to chemicals, oil, and acids.
Make tight bends in machine and equipment wiring.
Thicker corrugations make this conduit more crush resistant than standard flexible plastic conduit.
Connect different sizes of conduit.
Attach conduit to a knockout in an outlet box or enclosure.
Join pieces of conduit.
Covered with a copper braid, this conduit protects wire and cable from electromagnetic interference (EMI) caused by motors and other equipment.
A spring extension prevents sharp bends and kinks in your cord, prolonging its life. These bushings, which are more rigid than grommets, shield cords from rubbing against the edges of holes in enclosures and panels, so they won’t wear down.
More rigid than grommets, these bushings guard cords from rubbing against the edges of holes in enclosures and panels and wearing down.
Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.
This glass-filled PTFE is more rigid than standard PTFE for increased durability in high-stress applications.
Because ABS maintains its toughness even after thermoforming, it’s often made into storage cases, tote trays, equipment housings, and protective gear.
In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.
Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.
CPVC is just as chemical resistant as standard PVC Type 1 and can handle hotter temperatures up to 200° F.
The addition of PTFE provides a more slippery, wear-resistant surface than standard Delrin® acetal resin. It’s commonly fabricated into pump components, gears, and bearings.
An economical alternative to Delrin® acetal resin, this acetal copolymer offers similar wear resistance.
Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.
This cast nylon 6 material is easier to machine than other types of nylon. It’s comparable to Nylatron and Nycast.
At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.
This extruded acrylic offers similar performance as cast acrylic at a lower cost.
Cast acrylic is easier to machine than extruded acrylic. It's comparable to Lucite and Plexiglas® Acrylic.
A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94 V-0 for flame retardance.
Use Garolite G-10 in place of Garolite G-10/FR4 for applications that are sensitive to halogen, such as in nuclear plants. It's strong, machinable, and electrically insulating.
Hard fiber is the easiest composite to machine, making it good for creating custom parts. Also known as vulcanized fiber.
Route and insulate wire using these square fiberglass tubes, which fit better along edges and around corners than round tubes.
These insulation tubes and sheets meet ASTM E84 standards for flame and smoke.
Lightweight and super thin, these fiber-reinforced silica aerogel sheets and strips flex into tight spaces other insulation can't. Use on process piping and in power-generating applications.
Very rigid with a 0% water absorption rate, this insulation is unaffected by corrosive environments, organic solvents, and most acids. It is typically used in chemical-processing systems and underground lines.
Snap these grommets into place to hold wire, cable, and cords in wet locations and form a seal against dust, debris, and water.