Fixture Washers | McMaster-Carr

Filter by

System of Measurement

Screw Size

Material

Thickness

Finish

Fastener Strength Grade/Class

Washer Designation

Hardness

Color

Specifications Met

Performance

DFARS Compliance

REACH Compliance

RoHS Compliance

Fastener Strength Rating

Forward

How can we improve?

698 Products

Performance

Corrosion Resistant

Won't rust in wet and outdoor environments

343 products

High Strength

Withstand heavy loads and high stress without deforming

94 products

Performance

Electrically Conductive

Fasten components on printed circuit boards and inside breaker panels

2 products

General Purpose Washers

Your go-to metal washer for every screw size. Washers take the pressure off nuts and screws to protect mounting surfaces.

Stainless Steel About Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these washers resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Black-Oxide 18-8 Stainless Steel—Typically chosen for their appearance, these washers have a dark, matte coating to create a finished look. They resist rust in wet and outdoor environments, but won't hold up to harsh chemicals as well as 316 stainless steel.

Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these washers won't degrade when exposed to harsh weather, salt water, and most chemicals.

Super-Corrosion-Resistant High-Strength Bumax 109 Stainless Steel—As strong as 17-7 PH stainless steel and as corrosion resistant as 316 stainless steel. These washers are commonly used in demanding environments, such as marine and chemical processing applications.

	For Screw Size	ID	OD	Thk.	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel


		No. 0	0.062"	0.125"	0.005" to 0.024"	—	25	000000000	00000
		M0.9	1.0 mm	2.5 mm	0.2 mm to 0.4 mm	—	50	000000000	00000
		M1	1.1 mm	3.2 mm	0.2 mm to 0.4 mm	ISO 7089	100	000000000	0000
		M1.2	1.3 mm	3.8 mm	0.2 mm to 0.4 mm	ISO 7089	100	000000000	0000
		M1.4	1.5 mm	3.8 mm	0.2 mm to 0.4 mm	ISO 7089	100	000000000	0000
		M1.6	1.7 mm	4.0 mm	0.2 mm to 0.4 mm	DIN 125, ISO 7089	100	000000000	0000
		M1.7	1.9 mm	4.0 mm	0.2 mm to 0.4 mm	—	50	000000000	0000
		M1.8	2.0 mm	4.0 mm	0.2 mm to 0.4 mm	—	50	000000000	0000
		M1.91	2.1 mm	4.5 mm	0.2 mm to 0.4 mm	—	50	000000000	0000
		M2	2.2 mm	5.0 mm	0.2 mm to 0.4 mm	DIN 125, ISO 7089	100	000000000	0000
		M2.2	2.3 mm	4.5 mm	0.2 mm to 0.4 mm	—	50	000000000	0000
		M2.3	2.5 mm	4.8 mm	0.2 mm to 0.4 mm	—	50	000000000	0000
		M2.5	2.7 mm	6.0 mm	0.4 mm to 0.6 mm	DIN 125, ISO 7089	100	000000000	0000
		M2.9	3.1 mm	6.0 mm	0.2 mm to 0.4 mm	—	50	000000000	0000
		M3	3.2 mm	7.0 mm	0.4 mm to 0.6 mm	DIN 125, ISO 7089	100	000000000	0000
		M3.12	3.3 mm	6.4 mm	0.2 mm to 0.4 mm	—	50	000000000	0000
		M3.5	3.7 mm	8.0 mm	0.4 mm to 0.6 mm	DIN 125, ISO 7089	100	000000000	0000
		M3.63	3.8 mm	8.0 mm	0.2 mm to 0.4 mm	—	50	000000000	0000
		M3.9	4.2 mm	8.0 mm	0.2 mm to 0.4 mm	—	50	000000000	00000
		M4	4.3 mm	9.0 mm	0.7 mm to 0.9 mm	DIN 125, ISO 7089	100	000000000	0000
		M4.2	4.4 mm	8.5 mm	0.2 mm to 0.4 mm	—	50	000000000	0000
		M4.5	4.7 mm	9.0 mm	0.4 mm to 0.6 mm	—	100	000000000	0000
		M4.8	5.0 mm	10.0 mm	0.4 mm to 0.6 mm	—	100	000000000	00000
		M5	5.3 mm	10.0 mm	0.9 mm to 1.1 mm	DIN 125, ISO 7089	100	000000000	0000
		M5.5	5.7 mm	11.0 mm	0.4 mm to 0.6 mm	—	100	000000000	00000
		M6	6.4 mm	12.0 mm	1.4 mm to 1.8 mm	DIN 125, ISO 7089	100	000000000	0000
		M6.3	6.5 mm	12.5 mm	0.9 mm to 1.1 mm	—	100	000000000	00000
		M7	7.4 mm	14.0 mm	1.4 mm to 1.8 mm	DIN 125, ISO 7089	100	000000000	0000
		M8	8.4 mm	16.0 mm	1.4 mm to 1.8 mm	DIN 125, ISO 7089	100	000000000	00000
		M9	9.9 mm	17.0 mm	1.4 mm to 1.8 mm	—	25	000000000	0000
		M10	10.5 mm	20.0 mm	1.8 mm to 2.2 mm	DIN 125, ISO 7089	50	000000000	00000
		M11	11.9 mm	20.0 mm	1.4 mm to 1.8 mm	—	25	000000000	00000
		M12	13.0 mm	24.0 mm	2.3 mm to 2.7 mm	DIN 125, ISO 7089	25	000000000	00000
		M14	15.0 mm	28.0 mm	2.3 mm to 2.7 mm	DIN 125, ISO 7089	25	000000000	00000
		M16	17.0 mm	30.0 mm	2.7 mm to 3.3 mm	DIN 125, ISO 7089	25	000000000	00000
		M18	19.0 mm	34.0 mm	2.7 mm to 3.3 mm	DIN 125, ISO 7089	10	000000000	0000
		M20	21.0 mm	37.0 mm	2.7 mm to 3.3 mm	DIN 125, ISO 7089	10	000000000	00000
		M22	23.0 mm	39.0 mm	2.7 mm to 3.3 mm	DIN 125, ISO 7089	1	000000000	0000
		M24	25.0 mm	44.0 mm	3.7 mm to 4.3 mm	DIN 125, ISO 7089	10	000000000	00000
		M25	26.0 mm	47.0 mm	2.7 mm to 3.3 mm	—	5	000000000	00000
		M26	27.0 mm	50.0 mm	3.7 mm to 4.3 mm	DIN 125	1	000000000	0000
		M27	28.0 mm	50.0 mm	3.7 mm to 4.3 mm	DIN 125	1	000000000	0000
		M30	31.0 mm	56.0 mm	3.7 mm to 4.3 mm	DIN 125, ISO 7089	1	000000000	0000
		M36	37.0 mm	66.0 mm	4.4 mm to 5.6 mm	DIN 125, ISO 7089	1	000000000	0000
		M39	40.0 mm	72.0 mm	5.4 mm to 6.6 mm	DIN 125, ISO 7089	1	000000000	0000
		M42	43.0 mm	78.0 mm	6.0 mm to 8.0 mm	DIN 125, ISO 7089	1	000000000	0000
		M45	46.0 mm	76.0 mm	2.7 mm to 3.3 mm	—	1	000000000	00000
		M48	49.0 mm	82.5 mm	2.7 mm to 3.3 mm	—	1	000000000	00000
		M52	54.0 mm	98.0 mm	7.0 mm to 9.0 mm	DIN 125	1	000000000	00000
		M60	62.0 mm	110.0 mm	8.0 mm to 10.0 mm	DIN 125	1	000000000	00000
		M64	66.0 mm	115.0 mm	8.0 mm to 10.0 mm	DIN 125	1	000000000	00000

		Black-Oxide 18-8 Stainless Steel


				M3.5	3.7 mm	8.0 mm	0.5 mm to 0.6 mm	DIN 125	100	000000000	00000
				M8	8.4 mm	16.0 mm	1.4 mm to 1.8 mm	DIN 125	25	000000000	0000

				Super-Corrosion-Resistant 316 Stainless Steel


						M1.6	1.7 mm	4.0 mm	0.2 mm to 0.4 mm	DIN 125, ISO 7089	100	000000000	0000
M2						2.2 mm	5.0 mm	0.2 mm to 0.4 mm	DIN 125, ISO 7089	100	000000000	0000
M2.5	2.7 mm					6.0 mm	0.4 mm to 0.6 mm	DIN 125, ISO 7089	100	000000000	0000
M3	3.2 mm					7.0 mm	0.4 mm to 0.6 mm	DIN 125, ISO 7089	100	000000000	0000
M3.5	3.7 mm					8.0 mm	0.4 mm to 0.6 mm	DIN 125, ISO 7089	100	000000000	0000
M4	4.3 mm					9.0 mm	0.7 mm to 0.9 mm	DIN 125, ISO 7089	100	000000000	0000
M5	5.3 mm					10.0 mm	0.9 mm to 1.1 mm	DIN 125, ISO 7089	100	000000000	0000
M6	6.4 mm					12.0 mm	1.4 mm to 1.8 mm	DIN 125, ISO 7089	100	000000000	0000
M7	7.4 mm					14.0 mm	1.4 mm to 1.8 mm	DIN 125, ISO 7089	100	000000000	00000
M8	8.4 mm					16.0 mm	1.4 mm to 1.8 mm	DIN 125, ISO 7089	100	000000000	00000
M10	10.5 mm					20.0 mm	1.8 mm to 2.2 mm	DIN 125, ISO 7089	50	000000000	00000
M12	13.0 mm					24.0 mm	2.3 mm to 2.7 mm	DIN 125, ISO 7089	25	000000000	00000
M14	15.0 mm					28.0 mm	2.3 mm to 2.7 mm	DIN 125, ISO 7089	25	000000000	00000
M16	17.0 mm					30.0 mm	2.7 mm to 3.3 mm	DIN 125, ISO 7089	25	000000000	00000
M18	19.0 mm					34.0 mm	2.7 mm to 3.3 mm	DIN 125, ISO 7089	10	000000000	0000
M20	21.0 mm					37.0 mm	2.7 mm to 3.3 mm	DIN 125, ISO 7089	10	000000000	0000
M22	23.0 mm					39.0 mm	2.7 mm to 3.3 mm	DIN 125	5	000000000	0000
M24	25.0 mm					44.0 mm	3.7 mm to 4.3 mm	DIN 125, ISO 7089	5	000000000	0000
M30	31.0 mm					56.0 mm	3.7 mm to 4.3 mm	DIN 125, ISO 7089	5	000000000	00000
M36	37.0 mm					66.0 mm	4.4 mm to 5.6 mm	DIN 125, ISO 7089	1	000000000	0000
M39	40.0 mm					72.0 mm	5.4 mm to 6.6 mm	DIN 125, ISO 7089	1	000000000	00000
M42	43.0 mm					78.0 mm	6.0 mm to 8.0 mm	DIN 125, ISO 7089	1	000000000	00000

Super-Corrosion-Resistant High-Strength Bumax 109 Stainless Steel


						M6	6.4 mm	12.0 mm	1.4 mm to 1.8 mm	DIN 125, ISO 7089	10	000000000	0000
						M8	8.4 mm	16.0 mm	1.4 mm to 1.8 mm	DIN 125, ISO 7089	10	000000000	0000
						M10	10.5 mm	20.0 mm	1.8 mm to 2.2 mm	DIN 125, ISO 7089	5	000000000	0000
						M12	13.0 mm	24.0 mm	2.3 mm to 2.7 mm	DIN 125, ISO 7089	5	000000000	00000

Steel

Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.

Zinc-Yellow-Chromate-Plated Steel—With the same corrosion resistance as zinc-plated steel, these withstand occasional exposure to moisture.

Black-Oxide Steel—Typically chosen for their appearance, these washers have a dark, matte coating that creates a finished look. They offer minimal corrosion resistance, so they're best for dry environments.

Blue-Dyed Steel—These metric-sized washers have a distinctive blue color, so you can easily tell them apart from inch washers. The coating provides only minimal corrosion resistance, so these washers are best for dry environments.

Steel—Best for dry environments since moisture will cause these washers to rust.

Super-Corrosion-Resistant Zinc-Flake-Coated Steel—With 40 times the corrosion resistance of zinc-plated steel, these withstand rust as well as 316 stainless steel. They have been tested to extreme standards, including 1,000 hours of salt spray. They are similar to Magni-coated washers.

Black Super-Corrosion-Resistant-Coated Steel—Combines a finished appearance with the rust resistance of 316 stainless steel. The coating has been tested to extreme standards, including 1,000 hours of salt spray resistance, to hold up in wet and outdoor environments. Also known as black luster.

For Fastener Strength Grade/Class—If you require screws or nuts with a specific fastener strength rating, make sure your washer matches the grade or class.

	For Screw Size	ID	OD	Thk.	For Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel


		M2	2.2 mm	5.0 mm	0.3 mm to 0.4 mm	ISO Class 10.9	DIN 125, ISO 7089	100	000000000	000000
		M2.5	2.7 mm	6.0 mm	0.5 mm to 0.6 mm	ISO Class 10.9	DIN 125, ISO 7089	100	000000000	0000
		M3	3.2 mm	7.0 mm	0.5 mm to 0.6 mm	ISO Class 10.9	DIN 125, ISO 7089	100	000000000	0000
		M4	4.3 mm	9.0 mm	0.7 mm to 0.9 mm	ISO Class 10.9	DIN 125, ISO 7089	100	000000000	00000
		M5	5.3 mm	10.0 mm	0.9 mm to 1.1 mm	ISO Class 10.9	DIN 125, ISO 7089	100	000000000	00000
		M18	19.0 mm	34.0 mm	2.7 mm to 3.3 mm	ISO Class 10.9	DIN 125, ISO 7089	5	000000000	0000
		M22	23.0 mm	39.0 mm	2.7 mm to 3.3 mm	ISO Class 8.8	DIN 125, ISO 7089	5	000000000	00000
		M22	23.0 mm	39.0 mm	2.7 mm to 3.3 mm	ISO Class 10.9	DIN 125, ISO 7089	5	000000000	0000
		M26	27.0 mm	50.0 mm	3.7 mm to 4.3 mm	—	DIN 125	1	000000000	0000
		M30	31.0 mm	56.0 mm	3.7 mm to 4.3 mm	ISO Class 10.9	DIN 125, ISO 7089	1	000000000	0000

		Zinc-Yellow-Chromate-Plated Steel


				M3	3.2 mm	7.0 mm	0.5 mm to 0.6 mm	ISO Class 10.9	DIN 125, ISO 7089	100	000000000	0000
				M4	4.3 mm	9.0 mm	0.7 mm to 0.9 mm	ISO Class 10.9	DIN 125, ISO 7089	100	000000000	00000
				M5	5.3 mm	10.0 mm	0.9 mm to 1.1 mm	ISO Class 10.9	DIN 125, ISO 7089	100	000000000	00000
				M6	6.4 mm	12.0 mm	1.4 mm to 1.8 mm	ISO Class 10.9	DIN 125, ISO 7089	50	000000000	00000
				M6	6.5 mm	12.0 mm	1.5 mm to 1.6 mm	ISO Class 12.9	DIN 125	250	000000000	0000
				M8	8.4 mm	16.0 mm	1.4 mm to 1.8 mm	ISO Class 10.9	DIN 125, ISO 7089	25	000000000	0000
				M8	8.5 mm	16.0 mm	1.4 mm to 1.5 mm	ISO Class 12.9	DIN 125	250	000000000	0000
				M10	10.5 mm	20.0 mm	1.8 mm to 2.2 mm	ISO Class 10.9	DIN 125, ISO 7089	25	000000000	00000
				M10	10.6 mm	20.0 mm	1.9 mm to 2.0 mm	ISO Class 12.9	DIN 125	100	000000000	0000
				M12	13.0 mm	24.0 mm	2.3 mm to 2.7 mm	ISO Class 10.9	DIN 125, ISO 7089	10	000000000	0000
				M12	13.1 mm	24.0 mm	2.4 mm to 2.5 mm	ISO Class 12.9	DIN 125	50	000000000	0000
				M14	15.0 mm	28.0 mm	2.3 mm to 2.7 mm	ISO Class 10.9	DIN 125, ISO 7089	10	000000000	0000
				M16	17.0 mm	30.0 mm	2.7 mm to 3.3 mm	ISO Class 10.9	DIN 125, ISO 7089	5	000000000	0000
				M16	17.1 mm	30.0 mm	2.9 mm to 3.0 mm	ISO Class 12.9	DIN 125	25	000000000	0000
				M18	19.0 mm	34.0 mm	2.7 mm to 3.3 mm	ISO Class 10.9	DIN 125, ISO 7089	5	000000000	0000
				M20	21.0 mm	37.0 mm	2.7 mm to 3.3 mm	ISO Class 10.9	DIN 125, ISO 7089	5	000000000	0000
				M20	21.1 mm	37.0 mm	2.9 mm to 3.0 mm	ISO Class 12.9	DIN 125	25	000000000	0000
				M22	23.0 mm	39.0 mm	2.7 mm to 3.3 mm	ISO Class 10.9	DIN 125, ISO 7089	5	000000000	0000
				M22	23.0 mm	39.0 mm	2.7 mm to 3.3 mm	ISO Class 12.9	DIN 125, ISO 7089	25	000000000	0000
				M24	25.0 mm	44.0 mm	3.7 mm to 4.3 mm	ISO Class 10.9	DIN 125, ISO 7089	1	000000000	0000
				M24	25.2 mm	44.0 mm	3.9 mm	ISO Class 12.9	DIN 125	10	000000000	0000
				M30	31.0 mm	56.0 mm	3.7 mm to 4.3 mm	ISO Class 10.9	DIN 125, ISO 7089	1	000000000	0000
				M30	31.0 mm	56.0 mm	3.7 mm to 4.3 mm	ISO Class 12.9	DIN 125, ISO 7089	10	000000000	0000

				Black-Oxide Steel


						No. 0	0.062"	0.125"	0.005" to 0.024"	—	—	25	000000000	0000
						No. 1	0.078"	0.156"	0.005" to 0.024"	—	—	25	000000000	00000
						No. 2	0.094"	0.188"	0.014" to 0.033"	—	—	25	000000000	0000
						No. 4	0.125"	0.250"	0.049" to 0.068"	—	—	25	000000000	0000
						No. 6	0.156"	0.312"	0.049" to 0.068"	—	—	25	000000000	0000
						No. 8	0.172"	0.375"	0.049" to 0.068"	—	—	25	000000000	0000
						No. 10	0.203"	0.500"	0.080" to 0.099"	—	—	25	000000000	0000
						1/4"	0.281"	0.625"	0.105" to 0.130"	—	—	25	000000000	0000
						5/16"	0.344"	0.750"	0.105" to 0.130"	—	—	25	000000000	0000
						3/8"	0.406"	0.750"	0.079" to 0.098"	—	—	25	000000000	0000
						7/16"	0.469"	1.000"	0.105" to 0.130"	—	—	25	000000000	00000
						1/2"	0.531"	1.125"	0.105" to 0.130"	—	—	25	000000000	00000
						5/8"	0.656"	1.375"	0.105" to 0.130"	—	—	10	000000000	0000
						3/4"	0.812"	1.500"	0.198" to 0.223"	—	—	1	000000000	0000
						7/8"	0.906"	1.750"	0.136" to 0.161"	—	—	5	000000000	00000
						1"	1.031"	2.000"	0.168" to 0.193"	—	—	5	000000000	00000
						1 1/8"	1.156"	2.250"	0.199" to 0.224"	—	—	1	000000000	00000
						1 1/4"	1.281"	2.5"	0.24" to 0.26"	—	—	1	000000000	0000
						M2	2.2 mm	5.0 mm	0.3 mm to 0.4 mm	—	DIN 125, ISO 7089	50	000000000	0000
						M3	3.2 mm	7.0 mm	0.4 mm to 0.6 mm	—	DIN 125, ISO 7089	100	000000000	0000
						M4	4.3 mm	9.0 mm	0.7 mm to 0.9 mm	—	DIN 125, ISO 7089	100	000000000	0000
M5						5.3 mm	10.0 mm	0.9 mm to 1.1 mm	—	DIN 125, ISO 7089	100	000000000	0000
M6	6.4 mm					12.0 mm	1.4 mm to 1.8 mm	—	DIN 125, ISO 7089	50	000000000	00000
M10	10.5 mm					20.0 mm	1.8 mm to 2.2 mm	—	DIN 125, ISO 7089	25	000000000	00000
M12	13.0 mm					24.0 mm	2.3 mm to 2.7 mm	—	DIN 125	10	000000000	0000
M14	15.0 mm					28.0 mm	2.3 mm to 2.7 mm	—	DIN 125	10	000000000	0000
M16	17.0 mm					30.0 mm	2.7 mm to 3.3 mm	—	DIN 125	10	000000000	0000
M18	19.0 mm					34.0 mm	2.7 mm to 3.3 mm	—	DIN 125	10	000000000	00000
M20	21.0 mm					37.0 mm	2.7 mm to 3.3 mm	—	DIN 125	5	000000000	0000
M22	23.0 mm					39.0 mm	2.7 mm to 3.3 mm	—	DIN 125, ISO 7089	5	000000000	0000
M24	25.0 mm					44.0 mm	3.7 mm to 4.3 mm	—	DIN 125	1	000000000	0000

Blue-Dyed Steel


						M3	3.0 mm	7.0 mm	0.4 mm to 0.6 mm	—	DIN 125	20	000000000	0000
		M4				4.3 mm	9.0 mm	0.7 mm to 0.9 mm	—	DIN 125, ISO 7089	100	000000000	0000
		M5	5.3 mm			10.0 mm	0.9 mm to 1.1 mm	—	DIN 125, ISO 7089	100	000000000	0000
		M6	6.4 mm			12.0 mm	1.4 mm to 1.8 mm	—	DIN 125, ISO 7089	100	000000000	0000
		M8	8.4 mm			16.0 mm	1.4 mm to 1.8 mm	—	DIN 125, ISO 7089	100	000000000	0000
		M12	13.0 mm			24.0 mm	2.3 mm to 2.7 mm	—	DIN 125, ISO 7089	50	000000000	0000

		Steel


						M2	2.2 mm	5.0 mm	0.3 mm to 0.4 mm	—	DIN 125	100	000000000	0000
						M2.5	2.7 mm	6.0 mm	0.5 mm to 0.6 mm	—	DIN 125	100	000000000	0000
						M3	3.2 mm	7.0 mm	0.5 mm to 0.6 mm	—	DIN 125	100	000000000	0000
						M4	4.3 mm	9.0 mm	0.7 mm to 0.9 mm	—	DIN 125	100	000000000	0000
						M35	36.0 mm	66.0 mm	4.4 mm to 5.6 mm	—	DIN 125, ISO 7089	1	000000000	0000

						Super-Corrosion-Resistant Zinc-Flake-Coated Steel


								M6	6.4 mm	12.0 mm	1.4 mm to 1.8 mm	ISO Class 10.9	DIN 125, ISO 7089	100	000000000	0000
								M8	8.4 mm	16.0 mm	1.4 mm to 1.8 mm	ISO Class 10.9	DIN 125, ISO 7089	100	000000000	0000
								M10	10.5 mm	20.0 mm	1.8 mm to 2.2 mm	ISO Class 10.9	DIN 125, ISO 7089	100	000000000	0000
								M12	13.0 mm	24.0 mm	2.3 mm to 2.7 mm	ISO Class 10.9	DIN 125, ISO 7089	100	000000000	00000

								Black Super-Corrosion-Resistant-Coated Steel


										M16	17.0 mm	30.0 mm	2.7 mm to 3.3 mm	—	DIN 125, ISO 7089	5	000000000	0000
										M18	19.0 mm	34.0 mm	2.7 mm to 3.3 mm	—	DIN 125, ISO 7089	5	000000000	0000
				M20						21.0 mm	37.0 mm	2.7 mm to 3.3 mm	—	DIN 125, ISO 7089	5	000000000	0000
				M24	25.0 mm					44.0 mm	3.3 mm to 4.3 mm	—	DIN 125, ISO 7089	1	000000000	0000

Brass

Softer than most metals, brass washers won't damage other fastening components.

Brass—With a warm, polished look, these washers are often chosen for their appearance. Similar to 18-8 stainless steel, brass is corrosion resistant enough to stand up to wet environments.

Nickel-Plated Brass—The nickel plating offers better corrosion resistance than plain brass to stand up to solvents, salt water, and chemicals. The plating can wear off over time, so these washers are not recommended for applications that experience a lot of friction or wear.

	ID	OD	Thk.	Specs. Met	Pkg. Qty.		Pkg.
Brass


	No. 0	0.062"	0.125"	0.005" to 0.024"	—	25	000000000	00000
	No. 1	0.078"	0.156"	0.005" to 0.024"	—	25	000000000	0000
	M1.6	1.7 mm	4.0 mm	0.2 mm to 0.4 mm	DIN 125, ISO 7089	10	000000000	0000
	M2	2.2 mm	5.0 mm	0.2 mm to 0.4 mm	DIN 125, ISO 7089	100	000000000	0000
	M2.5	2.7 mm	6.0 mm	0.4 mm to 0.6 mm	DIN 125, ISO 7089	100	000000000	0000
	M3	3.2 mm	7.0 mm	0.4 mm to 0.6 mm	DIN 125, ISO 7089	100	000000000	0000
	M4	4.3 mm	9.0 mm	0.7 mm to 0.9 mm	DIN 125, ISO 7089	100	000000000	0000
	M5	5.3 mm	10.0 mm	0.9 mm to 1.1 mm	DIN 125, ISO 7089	100	000000000	0000
	M6	6.4 mm	12.0 mm	1.4 mm to 1.8 mm	DIN 125, ISO 7089	100	000000000	00000
	M7	7.4 mm	14.0 mm	1.4 mm to 1.8 mm	DIN 125, ISO 7089	10	000000000	0000
	M8	8.4 mm	16.0 mm	1.4 mm to 1.8 mm	DIN 125, ISO 7089	50	000000000	00000
	M10	10.5 mm	20.0 mm	1.8 mm to 2.2 mm	DIN 125, ISO 7089	25	000000000	00000
	M12	13.0 mm	24.0 mm	2.3 mm to 2.7 mm	DIN 125, ISO 7089	25	000000000	00000
	M14	15.0 mm	28.0 mm	2.3 mm to 2.7 mm	DIN 125, ISO 7089	10	000000000	00000
	M16	17.0 mm	30.0 mm	2.7 mm to 3.3 mm	DIN 125, ISO 7089	10	000000000	00000
	M18	19.0 mm	34.0 mm	2.7 mm to 3.3 mm	DIN 125, ISO 7089	1	000000000	0000
	M20	21.0 mm	37.0 mm	2.7 mm to 3.3 mm	DIN 125, ISO 7089	5	000000000	00000
	M24	25.0 mm	44.0 mm	3.7 mm to 4.3 mm	DIN 125, ISO 7089	1	000000000	0000

	Nickel-Plated Brass


			M3	3.2 mm	7.0 mm	0.4 mm to 0.6 mm	—	50	000000000	00000
			M4	4.3 mm	9.0 mm	0.4 mm to 0.6 mm	—	50	000000000	00000
			M5	5.3 mm	10.0 mm	0.9 mm to 1.1 mm	—	50	000000000	00000
			M6	6.4 mm	12.0 mm	1.4 mm to 1.8 mm	—	25	000000000	00000
			M8	8.4 mm	16.0 mm	1.4 mm to 1.8 mm	—	25	000000000	00000

Oversized Washers

These washers have exaggerated diameters to cover large holes and to compensate for uneven mounting surfaces. They are also thicker than general purpose washers, so they bridge wide gaps when used as spacers.

Stainless Steel About Stainless Steel

Image of Product. Front orientation. Washers. Oversized Washers.

18-8 Stainless Steel—The choice for wet and outdoor environments, these washers resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these washers won't degrade when exposed to harsh weather, salt water, and most chemicals.

High-Strength 17-4 PH Stainless Steel—Similar strength to 17-7 stainless steel washers and comparable to high-strength Grade 8 steel. These washers won’t rust in wet and outdoor environments, but they can’t handle the harsh chemicals that 316 stainless steel can.

High-Strength 17-7 PH Stainless Steel—Some of the strongest stainless steel washers we offer, these are comparable to high-strength Grade 8 steel. They won’t rust in wet and outdoor environments, but they can’t handle the harsh chemicals that 316 stainless steel can.

Super-Corrosion-Resistant High-Strength Bumax 88 Stainless Steel—As strong as medium-strength Class 8.8 steel and as corrosion resistant as 316 stainless steel. These washers are commonly used in demanding environments, such as marine and chemical processing applications.

	For Screw Size	ID	OD	Thk.	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel


		No. 0	0.078"	0.156"	0.005" to 0.024"	—	25	000000000	00000
		No. 4	0.125"	0.250"	0.049" to 0.068"	—	10	000000000	0000
		No. 4	0.125"	0.312"	0.064" to 0.083"	—	10	000000000	00000
		No. 6	0.156"	0.312"	0.049" to 0.068"	—	10	000000000	0000
		No. 6	0.156"	0.375"	0.064" to 0.083"	—	5	000000000	0000
		No. 8	0.172"	0.375"	0.049" to 0.068"	—	10	000000000	0000
		No. 8	0.188"	0.438"	0.064" to 0.083"	—	10	000000000	0000
		No. 10	0.203"	0.500"	0.080" to 0.099"	—	5	000000000	0000
		1/4"	0.281"	0.500"	0.064" to 0.083"	—	10	000000000	0000
		1/4"	0.281"	0.625"	0.105" to 0.130"	—	10	000000000	0000
		1/4"	0.281"	0.625"	0.168" to 0.193"	—	1	000000000	0000
		5/16"	0.344"	0.625"	0.079" to 0.098"	—	10	000000000	0000
		5/16"	0.344"	0.688"	0.105" to 0.130"	—	10	000000000	00000
		5/16"	0.344"	0.750"	0.105" to 0.130"	—	10	000000000	0000
		5/16"	0.344"	0.750"	0.168" to 0.193"	—	1	000000000	0000
		3/8"	0.406"	0.750"	0.079" to 0.098"	—	10	000000000	0000
		3/8"	0.406"	0.875"	0.105" to 0.130"	—	10	000000000	00000
		3/8"	0.406"	1.000"	0.105" to 0.130"	—	10	000000000	00000
		3/8"	0.406"	1.000"	0.168" to 0.193"	—	1	000000000	0000
		7/16"	0.469"	0.922"	0.105" to 0.130"	—	10	000000000	00000
		7/16"	0.469"	1.000"	0.105" to 0.130"	—	5	000000000	00000
		7/16"	0.469"	1.000"	0.168" to 0.193"	—	5	000000000	00000
		1/2"	0.531"	1.062"	0.168" to 0.192"	—	10	000000000	00000
		1/2"	0.531"	1.125"	0.105" to 0.130"	—	5	000000000	00000
		1/2"	0.531"	1.125"	0.168" to 0.193"	—	1	000000000	0000
		9/16"	0.594"	1.188"	0.168" to 0.193"	—	5	000000000	00000
		5/8"	0.656"	1.312"	0.198" to 0.223"	—	5	000000000	00000
		5/8"	0.656"	1.375"	0.105" to 0.130"	—	5	000000000	00000
		5/8"	0.656"	1.375"	0.168" to 0.193"	—	1	000000000	0000
		3/4"	0.781"	1.625"	0.136" to 0.161"	—	1	000000000	0000
		3/4"	0.781"	1.625"	0.230" to 0.255"	—	1	000000000	0000
		3/4"	0.812"	1.500"	0.198" to 0.223"	—	5	000000000	00000
		7/8"	0.906"	1.750"	0.136" to 0.161"	—	1	000000000	0000
		7/8"	0.906"	1.750"	0.230" to 0.255"	—	1	000000000	0000
		1"	1.031"	2.000"	0.168" to 0.193"	—	1	000000000	0000
		1"	1.031"	2.000"	0.230" to 0.255"	—	1	000000000	00000
		1"	1.031"	2.000"	0.261" to 0.286"	—	1	000000000	00000
		1 1/8"	1.156"	2.250"	0.199" to 0.224"	—	1	000000000	0000
		1 1/4"	1.281"	2.500"	0.261" to 0.286"	—	1	000000000	0000
		M2	2.2 mm	7.0 mm	0.6 mm to 1.0 mm	—	100	000000000	0000
		M2.5	2.7 mm	8.0 mm	0.7 mm to 0.9 mm	DIN 9021	100	000000000	0000
		M3	3.2 mm	8.0 mm	1.5 mm to 2.4 mm	—	1	000000000	0000
		M3	3.2 mm	9.0 mm	0.7 mm to 0.9 mm	DIN 9021	100	000000000	0000
		M3	3.2 mm	9.0 mm	0.9 mm to 1.1 mm	DIN 7349	100	000000000	0000
		M3	3.2 mm	12.0 mm	2.5 mm to 3.4 mm	—	1	000000000	0000
		M4	4.3 mm	10.0 mm	1.5 mm to 2.4 mm	—	1	000000000	0000
		M4	4.3 mm	12.0 mm	0.9 mm to 1.1 mm	DIN 9021	100	000000000	0000
		M4	4.3 mm	12.0 mm	1.4 mm to 1.8 mm	DIN 7349	100	000000000	00000
		M4	4.3 mm	14.0 mm	2.5 mm to 3.4 mm	—	1	000000000	0000
		M5	5.3 mm	11.0 mm	1.5 mm to 2.4 mm	—	1	000000000	0000
		M5	5.3 mm	15.0 mm	1.0 mm to 1.4 mm	DIN 9021	100	000000000	00000
		M5	5.3 mm	15.0 mm	1.8 mm to 2.2 mm	DIN 7349	100	000000000	00000
		M5	5.3 mm	15.0 mm	3.0 mm to 3.9 mm	—	1	000000000	0000
		M6	6.4 mm	13.0 mm	2.0 mm to 2.9 mm	—	1	000000000	0000
		M6	6.4 mm	17.0 mm	2.7 mm to 3.3 mm	DIN 7349	50	000000000	00000
		M6	6.4 mm	18.0 mm	1.4 mm to 1.8 mm	DIN 9021	50	000000000	00000
		M6	6.4 mm	18.0 mm	4.0 mm to 4.9 mm	—	1	000000000	0000
		M6	6.6 mm	22.0 mm	1.7 mm to 2.3 mm	DIN 440-R	1	000000000	0000
		M7	7.4 mm	22.0 mm	1.8 mm to 2.2 mm	DIN 9021	25	000000000	00000
		M8	8.4 mm	16.0 mm	2.5 mm to 3.4 mm	—	1	000000000	0000
		M8	8.4 mm	21.0 mm	3.7 mm to 4.3 mm	DIN 7349	25	000000000	00000
		M8	8.4 mm	22.0 mm	4.5 mm to 5.4 mm	—	1	000000000	0000
M8		8.4 mm	23.0 mm	3.7 mm to 4.0 mm	DIN 6340	1	000000000	0000
M8	8.4 mm	24.0 mm	1.8 mm to 2.2 mm	DIN 9021	25	000000000	00000
M8	9.0 mm	28.0 mm	2.4 mm to 3.6 mm	DIN 440-R	1	000000000	0000
M10	10.5 mm	19.0 mm	2.5 mm to 3.4 mm	—	1	000000000	0000
M10	10.5 mm	23.0 mm	4.5 mm to 5.4 mm	—	1	000000000	0000
M10	10.5 mm	25.0 mm	3.7 mm to 4.3 mm	DIN 7349	10	000000000	0000
M10	10.5 mm	26.0 mm	3.7 mm to 4.0 mm	DIN 6340	1	000000000	0000
M10	10.5 mm	30.0 mm	2.3 mm to 2.7 mm	DIN 9021	10	000000000	0000
M10	11.0 mm	34.0 mm	2.4 mm to 3.6 mm	DIN 440-R	1	000000000	0000
M12	12.0 mm	25.0 mm	2.7 mm to 3.0 mm	DIN 1440	1	000000000	0000
M12	13.0 mm	26.0 mm	4.5 mm to 5.4 mm	—	1	000000000	0000
M12	13.0 mm	30.0 mm	5.4 mm to 6.6 mm	DIN 7349	10	000000000	00000
M12	13.0 mm	35.0 mm	4.4 mm to 5.1 mm	DIN 6340	1	000000000	0000
M12	13.0 mm	37.0 mm	2.7 mm to 3.3 mm	DIN 9021	10	000000000	00000
M12	13.5 mm	44.0 mm	3.4 mm to 4.6 mm	DIN 440-R	1	000000000	0000
M14	15.0 mm	27.0 mm	4.5 mm to 5.4 mm	—	1	000000000	00000
M14	15.0 mm	36.0 mm	5.4 mm to 6.6 mm	DIN 7349	5	000000000	00000
M14	15.0 mm	44.0 mm	2.7 mm to 3.3 mm	DIN 9021	1	000000000	0000
M16	17.0 mm	32.0 mm	4.5 mm to 5.4 mm	—	1	000000000	00000
M16	17.0 mm	40.0 mm	5.4 mm to 6.6 mm	DIN 7349	5	000000000	00000
M16	17.0 mm	45.0 mm	5.5 mm to 6.6 mm	DIN 6340	1	000000000	00000
M16	17.0 mm	50.0 mm	2.7 mm to 3.3 mm	DIN 9021	5	000000000	00000
M16	17.5 mm	56.0 mm	4.0 mm to 6.0 mm	DIN 440-R	1	000000000	0000
M18	19.0 mm	44.0 mm	7.0 mm to 9.0 mm	DIN 7349	10	000000000	00000
M18	20.0 mm	56.0 mm	3.4 mm to 4.6 mm	DIN 9021	1	000000000	0000
M20	21.0 mm	35.0 mm	4.5 mm to 5.4 mm	—	1	000000000	00000
M20	21.0 mm	44.0 mm	7.0 mm to 9.0 mm	DIN 7349	1	000000000	0000
M20	22.0 mm	60.0 mm	3.4 mm to 4.6 mm	DIN 9021	1	000000000	0000
M20	22.0 mm	72.0 mm	5.0 mm to 7.0 mm	DIN 440-R	1	000000000	00000
M22	23.0 mm	50.0 mm	7.0 mm to 8.0 mm	DIN 7349	1	000000000	0000
M24	25.0 mm	43.0 mm	6.0 mm to 6.9 mm	—	1	000000000	00000
M24	25.0 mm	50.0 mm	9.0 mm to 11.0 mm	DIN 7349	1	000000000	0000
M24	26.0 mm	72.0 mm	4.0 mm to 6.0 mm	DIN 9021	1	000000000	0000
M30	31.0 mm	48.0 mm	6.0 mm to 6.9 mm	—	1	000000000	00000
M30	31.0 mm	68.0 mm	9.0 mm to 10.0 mm	DIN 7349	1	000000000	00000

Black-Oxide 18-8 Stainless Steel


		M2	2.2 mm	7.0 mm	0.6 mm to 1.0 mm	—	10	000000000	00000
		M2.5	2.7 mm	8.0 mm	0.7 mm to 0.9 mm	DIN 9021	10	000000000	00000
		M3	3.2 mm	9.0 mm	0.7 mm to 0.9 mm	DIN 9021	10	000000000	00000
		M4	4.3 mm	12.0 mm	0.9 mm to 1.1 mm	DIN 9021	10	000000000	00000
		M5	5.3 mm	15.0 mm	1.0 mm to 1.4 mm	DIN 9021	10	000000000	00000
		M6	6.4 mm	17.0 mm	2.7 mm to 3.3 mm	DIN 7349	25	000000000	00000
		M6	6.4 mm	18.0 mm	1.4 mm to 1.8 mm	DIN 9021	10	000000000	00000
		M6	6.6 mm	22.0 mm	1.7 mm to 2.3 mm	DIN 440-R	10	000000000	0000
		M7	7.4 mm	22.0 mm	1.8 mm to 2.2 mm	DIN 9021	10	000000000	00000
		M8	8.4 mm	24.0 mm	1.8 mm to 2.2 mm	DIN 9021	5	000000000	0000
		M10	10.5 mm	30.0 mm	2.3 mm to 2.7 mm	DIN 9021	5	000000000	00000
		M12	13.0 mm	37.0 mm	2.7 mm to 3.3 mm	DIN 9021	1	000000000	0000
		M14	15.0 mm	44.0 mm	2.7 mm to 3.3 mm	DIN 9021	1	000000000	0000
		M16	17.0 mm	50.0 mm	2.7 mm to 3.3 mm	DIN 9021	1	000000000	0000
		M18	20.0 mm	56.0 mm	3.4 mm to 4.6 mm	DIN 9021	1	000000000	0000
		M20	22.0 mm	60.0 mm	3.4 mm to 4.6 mm	DIN 9021	1	000000000	0000

		Super-Corrosion-Resistant 316 Stainless Steel


				M2	2.2 mm	7.0 mm	0.6 mm to 1.0 mm	—	100	000000000	0000
				M2.5	2.7 mm	8.0 mm	0.7 mm to 0.9 mm	DIN 9021	100	000000000	0000
				M3	3.2 mm	9.0 mm	0.7 mm to 0.9 mm	DIN 9021	50	000000000	0000
				M4	4.3 mm	12.0 mm	0.9 mm to 1.1 mm	DIN 9021	50	000000000	0000
				M5	5.3 mm	15.0 mm	1.0 mm to 1.4 mm	DIN 9021	50	000000000	00000
				M5	5.5 mm	18.0 mm	1.7 mm to 2.3 mm	DIN 440-R	25	000000000	00000
				M6	6.4 mm	17.0 mm	2.7 mm to 3.3 mm	DIN 6340	10	000000000	00000
				M6	6.4 mm	18.0 mm	1.4 mm to 1.8 mm	DIN 9021	25	000000000	0000
				M6	6.6 mm	22.0 mm	1.7 mm to 2.3 mm	DIN 440-R	10	000000000	0000
				M7	7.4 mm	22.0 mm	1.8 mm to 2.2 mm	DIN 9021	10	000000000	0000
				M8	8.4 mm	21.0 mm	3.7 mm to 4.3 mm	DIN 7349	25	000000000	00000
				M8	8.4 mm	23.0 mm	3.7 mm to 4.3 mm	DIN 6340	1	000000000	0000
				M8	8.4 mm	24.0 mm	1.8 mm to 2.2 mm	DIN 9021	10	000000000	0000
				M8	9.0 mm	28.0 mm	2.4 mm to 3.6 mm	DIN 440-R	10	000000000	00000
				M10	10.5 mm	25.0 mm	3.7 mm to 4.3 mm	DIN 7349	25	000000000	00000
				M10	10.5 mm	30.0 mm	2.3 mm to 2.7 mm	DIN 9021	5	000000000	0000
				M10	11.0 mm	34.0 mm	2.4 mm to 3.6 mm	DIN 440-R	5	000000000	0000
				M12	13.0 mm	30.0 mm	5.4 mm to 6.6 mm	DIN 7349	25	000000000	00000
				M12	13.0 mm	37.0 mm	2.7 mm to 3.3 mm	DIN 9021	1	000000000	0000
				M12	13.5 mm	44.0 mm	3.4 mm to 4.6 mm	DIN 440-R	1	000000000	0000
				M14	15.0 mm	44.0 mm	2.7 mm to 3.3 mm	DIN 9021	1	000000000	0000
				M16	17.0 mm	40.0 mm	5.4 mm to 6.0 mm	DIN 7349	1	000000000	0000
				M16	17.0 mm	50.0 mm	2.7 mm to 3.3 mm	DIN 9021	1	000000000	0000
				M18	20.0 mm	56.0 mm	3.4 mm to 4.6 mm	DIN 9021	1	000000000	0000
				M20	22.0 mm	60.0 mm	3.4 mm to 4.6 mm	DIN 9021	1	000000000	0000
				M24	26.8 mm	72.0 mm	4.0 mm to 6.0 mm	DIN 9021	1	000000000	0000

				High-Strength 17-4 PH Stainless Steel


						1/4"	0.281"	0.625"	0.105" to 0.130"	—	1	000000000	0000
						1/4"	0.281"	0.625"	0.177" to 0.197"	—	1	000000000	0000
						1/4"	0.313"	0.750"	0.068" to 0.088"	—	1	000000000	0000
						5/16"	0.344"	0.750"	0.105" to 0.130"	—	1	000000000	0000
						3/8"	0.406"	0.875"	0.105" to 0.130"	—	1	000000000	0000
						1/2"	0.531"	1.125"	0.105" to 0.130"	—	1	000000000	0000
						1/2"	0.531"	1.125"	0.177" to 0.197"	—	1	000000000	00000
						5/8"	0.656"	1.375"	0.177" to 0.197"	—	1	000000000	00000
						3/4"	0.781"	1.625"	0.136" to 0.161"	—	1	000000000	0000
						3/4"	0.781"	1.625"	0.235" to 0.255"	—	1	000000000	00000
						7/8"	0.906"	1.750"	0.136" to 0.161"	—	1	000000000	00000
						1"	1.031"	2.000"	0.271" to 0.291"	—	1	000000000	00000

High-Strength 17-7 PH Stainless Steel


						M2	2.2 mm	7.0 mm	0.6 mm to 1.0 mm	—	10	000000000	0000
						M3	3.2 mm	9.0 mm	0.7 mm to 0.9 mm	DIN 9021	10	000000000	00000
						M6	7.0 mm	13.6 mm	2.7 mm to 4.0 mm	DIN 9021	1	000000000	00000
						M8	8.4 mm	22.0 mm	4.5 mm to 5.4 mm	DIN 9021	1	000000000	00000

						Super-Corrosion-Resistant High-Strength Bumax 88 Stainless Steel


								M6	6.4 mm	18.0 mm	1.4 mm to 1.8 mm	DIN 9021, ISO 7093	5	000000000	00000
								M8	8.4 mm	24.0 mm	1.8 mm to 2.2 mm	DIN 9021, ISO 7093	5	000000000	00000
								M10	10.5 mm	30.0 mm	2.3 mm to 2.7 mm	DIN 9021, ISO 7093	1	000000000	0000
								M12	13.0 mm	37.0 mm	2.7 mm to 3.3 mm	DIN 9021, ISO 7093	1	000000000	00000

Steel

Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.

Zinc-Yellow-Chromate-Plated Steel—With the same corrosion resistance as zinc-plated steel, these withstand occasional exposure to moisture.

Steel—Best for dry environments since moisture will cause these washers to rust.

Corrosion-Resistant Galvanized Steel—These washers combine the strength of steel with the rust resistance of stainless steel. They're an economical alternative to 18-8 stainless steel in wet and outdoor environments, but they won't hold up to salt water and chemicals.

For Fastener Strength Grade/Class—If you require screws or nuts with a specific fastener strength rating, make sure your washer matches the grade or class.

	For Screw Size	ID	OD	Thk.	For Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel


		M2	2.2 mm	7.0 mm	0.6 mm to 1.0 mm	—	—	50	000000000	000000
		M2	2.2 mm	7.0 mm	0.6 mm to 1.0 mm	—	—	50	000000000	0000
		M2.5	2.7 mm	8.0 mm	0.7 mm to 0.9 mm	—	DIN 9021	100	000000000	0000
		M3	3.2 mm	9.0 mm	0.7 mm to 0.9 mm	—	DIN 9021	100	000000000	0000
		M3	3.2 mm	9.0 mm	0.9 mm to 1.1 mm	—	DIN 7349	100	000000000	0000
		M3	3.3 mm	8.7 mm	0.7 mm to 0.9 mm	ISO Class 8.8	DIN 9021	100	000000000	00000
		M3	3.3 mm	8.7 mm	0.9 mm to 1.1 mm	ISO Class 8.8	DIN 7349	100	000000000	00000
		M4	4.3 mm	12.0 mm	0.9 mm to 1.1 mm	—	DIN 9021	100	000000000	0000
		M4	4.3 mm	12.0 mm	1.4 mm to 1.8 mm	—	DIN 7349	100	000000000	0000
		M4	4.4 mm	11.7 mm	0.9 mm to 1.1 mm	ISO Class 8.8	DIN 9021	100	000000000	00000
		M4	4.4 mm	11.7 mm	1.4 mm to 1.8 mm	ISO Class 8.8	DIN 7349	50	000000000	00000
		M5	5.3 mm	15.0 mm	1.0 mm to 1.4 mm	—	DIN 9021	100	000000000	0000
		M5	5.3 mm	15.0 mm	1.8 mm to 2.2 mm	—	DIN 7349	100	000000000	0000
		M5	5.4 mm	14.7 mm	1.0 mm to 1.4 mm	ISO Class 8.8	DIN 9021	100	000000000	00000
		M5	5.4 mm	14.7 mm	1.8 mm to 2.2 mm	ISO Class 8.8	DIN 7349	50	000000000	00000
		M5	5.5 mm	18.0 mm	1.7 mm to 2.3 mm	—	DIN 440-R	25	000000000	00000
		M6	6.4 mm	17.0 mm	2.7 mm to 3.3 mm	—	DIN 7349	100	000000000	00000
		M6	6.4 mm	18.0 mm	1.4 mm to 1.8 mm	—	DIN 9021	100	000000000	0000
		M6	6.5 mm	16.7 mm	2.7 mm to 3.3 mm	ISO Class 8.8	DIN 7349	25	000000000	00000
		M6	6.5 mm	16.7 mm	2.7 mm to 3.3 mm	ISO Class 10.9	DIN 7349	10	000000000	0000
		M6	6.5 mm	17.7 mm	1.4 mm to 1.8 mm	ISO Class 8.8	DIN 9021	50	000000000	00000
		M6	6.5 mm	17.7 mm	1.4 mm to 1.8 mm	ISO Class 10.9	DIN 9021	25	000000000	00000
		M6	6.6 mm	22.0 mm	1.7 mm to 2.3 mm	—	DIN 440-R	25	000000000	00000
		M7	7.4 mm	22.0 mm	1.8 mm to 2.2 mm	—	DIN 9021	25	000000000	0000
		M8	8.4 mm	21.0 mm	3.7 mm to 4.3 mm	—	DIN 7349	50	000000000	00000
		M8	8.4 mm	23.0 mm	3.7 mm to 4.3 mm	—	DIN 6340	10	000000000	00000
		M8	8.4 mm	24.0 mm	1.8 mm to 2.2 mm	—	DIN 9021	100	000000000	00000
		M8	8.5 mm	20.7 mm	3.7 mm to 4.3 mm	ISO Class 8.8	DIN 7349	10	000000000	00000
		M8	8.5 mm	20.7 mm	3.7 mm to 4.3 mm	ISO Class 10.9	DIN 7349	10	000000000	00000
		M8	8.5 mm	23.7 mm	1.8 mm to 2.2 mm	ISO Class 8.8	DIN 9021	25	000000000	00000
		M8	8.5 mm	23.7 mm	1.8 mm to 2.2 mm	ISO Class 10.9	DIN 9021	10	000000000	0000
		M8	9.0 mm	28.0 mm	2.4 mm to 3.6 mm	—	DIN 440-R	10	000000000	00000
		M10	10.5 mm	25.0 mm	3.7 mm to 4.3 mm	—	DIN 7349	50	000000000	00000
		M10	10.5 mm	30.0 mm	2.3 mm to 2.7 mm	—	DIN 9021	50	000000000	00000
		M10	10.6 mm	24.7 mm	3.7 mm to 4.3 mm	ISO Class 8.8	DIN 7349	10	000000000	00000
		M10	10.6 mm	24.7 mm	3.7 mm to 4.3 mm	ISO Class 10.9	DIN 7349	5	000000000	00000
		M10	10.6 mm	29.7 mm	2.3 mm to 2.7 mm	ISO Class 8.8	DIN 9021	10	000000000	00000
		M10	10.6 mm	29.7 mm	2.3 mm to 2.7 mm	ISO Class 10.9	DIN 9021	5	000000000	00000
		M10	11.0 mm	34.0 mm	2.4 mm to 3.6 mm	—	DIN 440-R	10	000000000	00000
		M12	13.0 mm	30.0 mm	5.4 mm to 6.6 mm	—	DIN 7349	10	000000000	0000
		M12	13.0 mm	37.0 mm	2.7 mm to 3.3 mm	—	DIN 9021	25	000000000	00000
		M12	13.1 mm	36.6 mm	2.7 mm to 3.3 mm	ISO Class 8.8	DIN 9021	5	000000000	00000
		M12	13.1 mm	36.6 mm	2.7 mm to 3.3 mm	ISO Class 10.9	DIN 9021	5	000000000	00000
		M12	13.2 mm	29.5 mm	5.4 mm to 6.6 mm	ISO Class 8.8	DIN 7349	1	000000000	0000
		M12	14.0 mm	44.0 mm	3.4 mm to 4.6 mm	—	DIN 440-R	1	000000000	0000
		M14	15.0 mm	36.0 mm	5.4 mm to 6.6 mm	—	DIN 7349	10	000000000	00000
		M14	15.0 mm	44.0 mm	2.7 mm to 3.3 mm	—	DIN 9021	25	000000000	00000
		M14	15.1 mm	43.6 mm	2.7 mm to 3.3 mm	ISO Class 10.9	DIN 9021	1	000000000	0000
		M16	17.0 mm	40.0 mm	5.4 mm to 6.6 mm	—	DIN 7349	10	000000000	00000
		M16	17.0 mm	50.0 mm	2.7 mm to 3.3 mm	—	DIN 9021	25	000000000	00000
		M16	17.1 mm	49.6 mm	2.7 mm to 3.3 mm	ISO Class 8.8	DIN 9021	1	000000000	0000
		M16	17.1 mm	49.6 mm	2.7 mm to 3.3 mm	ISO Class 10.9	DIN 9021	1	000000000	0000
		M16	17.2 mm	39.5 mm	5.4 mm to 6.6 mm	ISO Class 8.8	DIN 7349	1	000000000	0000
		M18	19.0 mm	44.0 mm	7.0 mm to 9.0 mm	—	DIN 7349	5	000000000	00000
		M18	20.0 mm	56.0 mm	3.4 mm to 4.6 mm	—	DIN 9021	10	000000000	00000
		M20	21.0 mm	44.0 mm	7.0 mm to 9.0 mm	—	DIN 7349	5	000000000	00000
		M20	22.0 mm	60.0 mm	3.4 mm to 4.6 mm	—	DIN 9021	10	000000000	00000
		M20	22.2 mm	58.4 mm	3.4 mm to 4.6 mm	ISO Class 8.8	DIN 9021	1	000000000	0000
		M20	22.2 mm	58.5 mm	3.4 mm to 4.6 mm	ISO Class 10.9	DIN 9021	1	000000000	00000
		M22	23.0 mm	50.0 mm	7.0 mm to 9.0 mm	—	DIN 7349	5	000000000	00000
		M24	25.0 mm	50.0 mm	9.0 mm to 11.0 mm	—	DIN 7349	1	000000000	0000
		M24	26.8 mm	72.0 mm	4.0 mm to 6.0 mm	—	DIN 9021	1	000000000	0000
M27		28.0 mm	60.0 mm	9.0 mm to 11.0 mm	—	DIN 7349	1	000000000	0000
M30	31.0 mm	68.0 mm	9.0 mm to 11.0 mm	—	DIN 7349	1	000000000	0000

Zinc-Yellow-Chromate-Plated Steel


		1/4"	0.281"	0.625"	0.090" to 0.108"	SAE Grade 8	—	100	000000000	00000
		5/16"	0.344"	0.688"	0.090" to 0.108"	SAE Grade 8	—	50	000000000	00000
		3/8"	0.406"	0.812"	0.110" to 0.126"	SAE Grade 8	—	50	000000000	00000
		7/16"	0.469"	0.922"	0.110" to 0.126"	SAE Grade 8	—	25	000000000	0000
		1/2"	0.531"	1.062"	0.190" to 0.208"	SAE Grade 8	—	25	000000000	00000
		9/16"	0.594"	1.172"	0.168" to 0.191"	SAE Grade 8	—	10	000000000	00000
		5/8"	0.656"	1.312"	0.206" to 0.229"	SAE Grade 8	—	10	000000000	00000
		3/4"	0.812"	1.469"	0.206" to 0.229"	SAE Grade 8	—	10	000000000	00000
		7/8"	0.938"	1.750"	0.235" to 0.264"	SAE Grade 8	—	5	000000000	0000
		1"	1.062"	2.000"	0.235" to 0.264"	SAE Grade 8	—	5	000000000	0000
		1 1/8"	1.188"	2.250"	0.235" to 0.264"	SAE Grade 8	—	5	000000000	00000
		1 1/4"	1.375"	2.500"	0.235" to 0.264"	SAE Grade 8	—	5	000000000	00000
		1 3/8"	1.438"	2.750"	0.235" to 0.264"	SAE Grade 8	—	1	000000000	0000
		1 1/2"	1.562"	3.000"	0.235" to 0.264"	SAE Grade 8	—	1	000000000	0000
		M6	6.5 mm	16.7 mm	2.7 mm to 3.3 mm	ISO Class 10.9	DIN 7349	10	000000000	0000
		M6	6.5 mm	17.7 mm	1.4 mm to 1.8 cm	ISO Class 10.9	DIN 9021	25	000000000	00000
		M8	8.5 mm	20.7 mm	3.7 mm to 4.3 mm	ISO Class 10.9	DIN 7349	10	000000000	00000
		M8	8.5 mm	23.7 mm	1.8 mm to 2.2 mm	ISO Class 10.9	DIN 9021	10	000000000	0000
		M10	10.6 mm	24.7 mm	3.7 mm to 4.3 mm	ISO Class 10.9	DIN 7349	5	000000000	00000
		M10	10.6 mm	29.7 mm	2.3 mm to 2.7 mm	ISO Class 10.9	DIN 9021	5	000000000	00000
		M12	13.1 mm	36.6 mm	2.7 mm to 3.3 mm	ISO Class 10.9	DIN 9021	5	000000000	00000
		M16	17.1 mm	49.6 mm	2.7 mm to 3.3 mm	ISO Class 10.9	DIN 9021	1	000000000	0000

		Black-Oxide Steel


				No. 4	0.125"	0.312"	0.068" to 0.088"	—	—	25	000000000	00000
				No. 6	0.156"	0.375"	0.068" to 0.088"	—	—	25	000000000	00000
				No. 6	0.156"	0.562"	0.120" to 0.130"	—	—	10	000000000	0000
				No. 8	0.188"	0.438"	0.068" to 0.088"	—	—	25	000000000	00000
				No. 8	0.188"	0.750"	0.120" to 0.130"	—	—	10	000000000	0000
				No. 10	0.203"	1.000"	0.120" to 0.130"	—	—	10	000000000	00000
				1/4"	0.281"	0.500"	0.064" to 0.083"	—	—	25	000000000	0000
				1/4"	0.281"	0.625"	0.168" to 0.193"	—	—	10	000000000	0000
				1/4"	0.281"	0.750"	0.130" to 0.150"	—	—	10	000000000	00000
				1/4"	0.281"	1.000"	0.120" to 0.130"	—	—	10	000000000	00000
				1/4"	0.281"	1.500"	0.120" to 0.130"	—	—	10	000000000	00000
				5/16"	0.344"	0.625"	0.079" to 0.098"	—	—	25	000000000	0000
				5/16"	0.344"	0.688"	0.105" to 0.130"	—	—	25	000000000	00000
				5/16"	0.344"	0.750"	0.168" to 0.193"	—	—	10	000000000	0000
				5/16"	0.344"	0.875"	0.130" to 0.150"	—	—	10	000000000	00000
				5/16"	0.344"	1.250"	0.120" to 0.130"	—	—	10	000000000	00000
				3/8"	0.406"	0.875"	0.105" to 0.130"	—	—	25	000000000	00000
				3/8"	0.406"	1.000"	0.105" to 0.130"	—	—	10	000000000	0000
				3/8"	0.406"	1.000"	0.168" to 0.193"	—	—	10	000000000	0000
				3/8"	0.406"	1.625"	0.120" to 0.130"	—	—	10	000000000	00000
				7/16"	0.469"	1.000"	0.168" to 0.193"	—	—	5	000000000	0000
				7/16"	0.469"	1.250"	0.168" to 0.193"	—	—	5	000000000	00000
				1/2"	0.531"	1.062"	0.168" to 0.192"	—	—	5	000000000	0000
				1/2"	0.531"	1.125"	0.168" to 0.193"	—	—	5	000000000	0000
				1/2"	0.531"	1.375"	0.146" to 0.166"	—	—	5	000000000	0000
				1/2"	0.531"	1.500"	0.198" to 0.233"	—	—	5	000000000	00000
				1/2"	0.531"	2.000"	0.120" to 0.130"	—	—	5	000000000	00000
				5/8"	0.656"	1.312"	0.198" to 0.223"	—	—	1	000000000	0000
				5/8"	0.656"	1.375"	0.168" to 0.193"	—	—	5	000000000	0000
				5/8"	0.656"	1.500"	0.198" to 0.233"	—	—	1	000000000	0000
				5/8"	0.656"	1.750"	0.146" to 0.166"	—	—	1	000000000	0000
				5/8"	0.719"	1.250"	0.230" to 0.255"	—	—	1	000000000	0000
				3/4"	0.781"	1.625"	0.136" to 0.161"	—	—	10	000000000	00000
				3/4"	0.781"	1.625"	0.230" to 0.255"	—	—	5	000000000	0000
				3/4"	0.781"	1.875"	0.230" to 0.255"	—	—	1	000000000	0000
				3/4"	0.812"	2.000"	0.240" to 0.260"	—	—	1	000000000	0000
3/4"				0.844"	1.500"	0.230" to 0.255"	—	—	1	000000000	0000
7/8"	0.906"			1.750"	0.230" to 0.255"	—	—	5	000000000	00000
7/8"	0.906"			1.828"	0.230" to 0.255"	—	—	1	000000000	0000
7/8"	0.906"			2.125"	0.293" to 0.318"	—	—	1	000000000	0000
1"	1.031"			2.000"	0.230" to 0.255"	—	—	1	000000000	0000
1"	1.031"			2.000"	0.261" to 0.286"	—	—	1	000000000	0000
1"	1.062"			2.500"	0.240" to 0.260"	—	—	1	000000000	00000
1"	1.063"			2.500"	0.293" to 0.318"	—	—	1	000000000	00000
1 1/2"	1.563"			2.750"	0.355" to 0.380"	—	—	1	000000000	00000
M3	3.2 mm			8.0 mm	1.5 mm to 2.4 mm	—	—	25	000000000	00000
M3	3.2 mm			12.0 mm	2.5 mm to 3.4 mm	—	—	5	000000000	0000
M4	4.3 mm			10.0 mm	1.5 mm to 2.4 mm	—	—	25	000000000	00000
M4	4.3 mm			12.0 mm	1.4 mm to 1.8 mm	—	DIN 7349	50	000000000	00000
M4	4.3 mm			14.0 mm	2.5 mm to 3.4 mm	—	—	5	000000000	0000
M5	5.3 mm			11.0 mm	1.5 mm to 2.4 mm	—	—	10	000000000	0000
M5	5.3 mm			15.0 mm	3.0 mm to 3.9 mm	—	—	5	000000000	0000
M6	6.4 mm			13.0 mm	2.0 mm to 2.9 mm	—	—	10	000000000	0000
M6	6.4 mm			17.0 mm	2.7 mm to 3.3 mm	—	DIN 7349	25	000000000	00000
M6	6.4 mm			18.0 mm	4.0 mm to 4.9 mm	—	—	5	000000000	00000
M8	8.4 mm			16.0 mm	2.5 mm to 3.4 mm	—	—	10	000000000	0000
M8	8.4 mm			22.0 mm	4.5 mm to 5.4 mm	—	—	5	000000000	0000
M10	10.5 mm			19.0 mm	2.5 mm to 3.4 mm	—	—	10	000000000	0000
M10	10.5 mm			23.0 mm	4.5 mm to 5.4 mm	—	—	5	000000000	0000
M10	10.5 mm			30.0 mm	2.3 mm to 2.7 mm	—	DIN 9021	10	000000000	0000
M12	13.0 mm			26.0 mm	4.5 mm to 5.4 mm	—	—	5	000000000	0000
M12	13.0 mm			37.0 mm	2.7 mm to 3.3 mm	—	DIN 9021	5	000000000	0000
M14	15.0 mm	27.0 mm		4.5 mm to 5.4 mm	—	—	5	000000000	0000
M16	17.0 mm	32.0 mm	4.5 mm to 5.4 mm	—	—	5	000000000	00000
M18	19.0 mm	44.0 mm	7.0 mm to 9.0 mm	—	DIN 7349	1	000000000	0000
M20	21.0 mm	35.0 mm	4.5 mm to 5.4 mm	—	—	5	000000000	00000
M24	25.0 mm	43.0 mm	6.0 mm to 6.9 mm	—	—	5	000000000	00000
M30	31.0 mm	48.0 mm	6.0 mm to 6.9 mm	—	—	1	000000000	0000
M36	37.0 mm	50.0 mm	7.0 mm to 7.9 mm	—	—	1	000000000	0000

Blue-Dyed Steel


		M6	6.4 mm	17.0 mm	2.8 mm to 3.3 mm	—	DIN 7349	20	000000000	00000
		M6	7.0 mm	12.0 mm	2.7 mm to 4.0 mm	—	—	25	000000000	00000
		M8	9.0 mm	17.0 mm	2.5 mm to 3.5 mm	—	—	50	000000000	00000
		M10	11.0 mm	20.0 mm	3.0 mm to 4.5 mm	—	—	25	000000000	00000
		M12	14.2 mm	26.0 mm	3.4 mm to 3.7 mm	—	—	10	000000000	0000
		M16	18.0 mm	32.0 mm	3.1 mm to 4.6 mm	—	—	5	000000000	0000
		M20	22.0 mm	38.0 mm	2.9 mm to 3.3 mm	—	—	5	000000000	0000
		M24	26.0 mm	48.0 mm	3.4 mm to 4.6 mm	—	—	5	000000000	00000
		M30	33.0 mm	58.0 mm	3.4 mm to 4.6 mm	—	—	1	000000000	0000
		M36	39.3 mm	70.0 mm	3.9 mm to 4.3 mm	—	—	1	000000000	00000

		Steel


				No. 10	0.203"	0.500"	0.089" to 0.099"	—	—	25	000000000	00000
				1/4"	0.281"	0.625"	0.120" to 0.130"	—	—	25	000000000	00000
				5/16"	0.344"	0.750"	0.120" to 0.130"	—	—	25	000000000	00000
				3/8"	0.406"	0.875"	0.120" to 0.130"	—	—	10	000000000	0000
				7/16"	0.469"	1.000"	0.151" to 0.161"	—	—	10	000000000	00000
				1/2"	0.531"	1.000"	0.183" to 0.193"	—	—	10	000000000	00000
				5/8"	0.656"	1.250"	0.245" to 0.255"	—	—	5	000000000	00000
				3/4"	0.781"	1.500"	0.245" to 0.255"	—	—	5	000000000	00000
				7/8"	0.906"	1.750"	0.245" to 0.255"	—	—	1	000000000	0000
				1"	1.031"	2.000"	0.308" to 0.318"	—	—	1	000000000	0000
				1 1/8"	1.156"	2.250"	0.308" to 0.318"	—	—	1	000000000	0000
				1 1/4"	1.281"	2.250"	0.308" to 0.318"	—	—	1	000000000	0000
				M3	3.0 mm	6.0 mm	0.7 mm to 0.9 mm	—	DIN 1440, ISO 8738	100	000000000	0000
				M4	4.0 mm	8.0 mm	0.7 mm to 0.9 mm	—	DIN 1440, ISO 8738	100	000000000	0000
				M5	5.0 mm	10.0 mm	0.7 mm to 0.9 mm	—	DIN 1440, ISO 8738	100	000000000	0000
				M5	5.3 mm	15.0 mm	1.0 mm to 1.4 mm	—	DIN 9021	100	000000000	0000
				M5	5.3 mm	15.0 mm	1.8 mm to 2.2 mm	—	DIN 7349	50	000000000	0000
				M5	5.5 mm	18.0 mm	1.7 mm to 2.3 mm	—	DIN 440-R	100	000000000	00000
				M6	6.0 mm	12.0 mm	1.3 mm to 1.7 mm	—	DIN 1440, ISO 8738	100	000000000	0000
				M6	6.4 mm	17.0 mm	2.7 mm to 3.3 mm	—	DIN 6340	50	000000000	00000
				M6	6.6 mm	22.0 mm	1.7 mm to 2.3 mm	—	DIN 440-R	25	000000000	0000
				M7	7.0 mm	14.0 mm	1.3 mm to 1.7 mm	—	DIN 1440, ISO 8738	100	000000000	0000
				M8	8.0 mm	16.0 mm	1.8 mm to 2.2 mm	—	DIN 1440, ISO 8738	100	000000000	00000
				M8	8.4 mm	23.0 mm	3.7 mm to 4.3 mm	—	DIN 6340	25	000000000	00000
				M8	8.9 mm	21.0 mm	3.7 mm to 4.3 mm	—	DIN 7349	25	000000000	00000
				M8	9.0 mm	28.0 mm	2.4 mm to 3.6 mm	—	DIN 440-R	10	000000000	0000
				M10	10.0 mm	20.0 mm	2.2 mm to 2.8 mm	—	DIN 1440, ISO 8738	50	000000000	00000
				M10	10.5 mm	25.0 mm	3.7 mm to 4.3 mm	—	DIN 7349	5	000000000	00000
				M10	10.5 mm	28.0 mm	3.7 mm to 4.3 mm	—	DIN 6340	10	000000000	0000
				M10	10.5 mm	30.0 mm	2.3 mm to 2.7 mm	—	DIN 9021	10	000000000	0000
				M10	11.0 mm	34.0 mm	2.4 mm to 3.6 mm	—	DIN 440-R	25	000000000	00000
				M12	12.0 mm	25.0 mm	2.7 mm to 3.3 mm	—	DIN 1440, ISO 8738	25	000000000	00000
				M12	13.0 mm	35.0 mm	4.4 mm to 5.6 mm	—	DIN 6340	10	000000000	00000
				M12	13 mm	30.0 mm	5.4 mm to 6.6 mm	—	DIN 7349	1	000000000	0000
				M12	13 mm	37.0 mm	2.7 mm to 3.3 mm	—	DIN 9021	10	000000000	00000
				M12	13.5 mm	44.0 mm	3.4 mm to 4.6 mm	—	DIN 440-R	5	000000000	0000
				M14	14.0 mm	28.0 mm	2.7 mm to 3.3 mm	—	DIN 1440, ISO 8738	25	000000000	00000
				M16	16.0 mm	28.0 mm	2.7 mm to 3.3 mm	—	DIN 1440, ISO 8738	25	000000000	00000
				M16	17.0 mm	40.0 mm	5.4 mm to 6.6 mm	—	DIN 7349	1	000000000	0000
				M16	17.0 mm	45.0 mm	5.4 mm to 6.6 mm	—	DIN 6340	5	000000000	00000
				M16	17.0 mm	50.0 mm	2.7 mm to 3.3 mm	—	DIN 9021	5	000000000	0000
				M16	17.5 mm	56.0 mm	4.0 mm to 6.0 mm	—	DIN 440-R	5	000000000	00000
				M18	18.0 mm	30.0 mm	3.7 mm to 4.3 mm	—	DIN 1440, ISO 8738	10	000000000	0000
				M20	20.0 mm	32.0 mm	3.7 mm to 4.3 mm	—	DIN 1440, ISO 8738	10	000000000	0000
				M20	21.0 mm	44.0 mm	7.0 mm to 9.0 mm	—	DIN 7349	1	000000000	0000
				M20	21.0 mm	50.0 mm	5.4 mm to 6.6 mm	—	DIN 6340	5	000000000	00000
				M20	22.0 mm	60.0 mm	3.4 mm to 4.6 mm	—	DIN 9021	1	000000000	0000
				M20	22.0 mm	72.0 mm	5.0 mm to 7.0 mm	—	DIN 440-R	1	000000000	0000
M22				22.0 mm	34.0 mm	3.7 mm to 4.3 mm	—	DIN 1440, ISO 8738	10	000000000	00000
M22	24.0 mm			80.0 mm	5.0 mm to 7.0 mm	—	DIN 440-R	1	000000000	0000
M24	24.0 mm			38.0 mm	3.7 mm to 4.3 mm	—	DIN 1440, ISO 8738	10	000000000	00000
M24	25.0 mm			60.0 mm	7.0 mm to 9.0 mm	—	DIN 6340	1	000000000	0000
M24	26.0 mm			85.0 mm	5.0 mm to 7.0 mm	—	DIN 440-R	1	000000000	0000
M25	25.0 mm			40.0 mm	3.7 mm to 4.3 mm	—	DIN 1440, ISO 8738	5	000000000	0000
M26	26.0 mm			40.0 mm	4.4 mm to 5.6 mm	—	DIN 1440, ISO 8738	5	000000000	0000
M27	30.0 mm			98.0 mm	5.0 mm to 7.0 mm	—	DIN 440-R	1	000000000	0000
M28	28.0 mm			42.0 mm	4.4 mm to 5.6 mm	—	DIN 1440, ISO 8738	5	000000000	00000
M30	30.0 mm			45.0 mm	4.4 mm to 5.6 mm	—	DIN 1440, ISO 8738	1	000000000	0000
M30	31.0 mm			68.0 mm	9.0 mm to 11.0 mm	—	DIN 6340	1	000000000	0000
M32	32.0 mm			50.0 mm	4.4 mm to 5.6 mm	—	DIN 1440, ISO 8738	1	000000000	0000

Corrosion-Resistant Galvanized Steel


		1/2"	0.562"	3.000"	0.235" to 0.265"	—	—	1	000000000	00000
		5/8"	0.688"	3.000"	0.235" to 0.265"	—	—	1	000000000	00000
		3/4"	0.812"	3.000"	0.235" to 0.265"	—	—	1	000000000	0000
		7/8"	0.938"	3.000"	0.235" to 0.265"	—	—	1	000000000	00000
		1"	1.062"	3.250"	0.235" to 0.265"	—	—	1	000000000	00000
		1 1/4"	1.375"	4.000"	0.485" to 0.515"	—	—	1	000000000	00000

		Black Super-Corrosion-Resistant-Coated Steel


				M4	4.3 mm	12.0 mm	0.9 mm to 1.1 mm	—	DIN 9021, ISO 7093	5	000000000	0000
				M5	5.3 mm	15.0 mm	1.0 mm to 1.4 mm	—	DIN 9021, ISO 7093	5	000000000	0000
				M6	6.4 mm	18.0 mm	1.4 mm to 1.8 mm	—	DIN 9021, ISO 7093	5	000000000	0000
				M8	8.4 mm	24.0 mm	1.8 mm to 2.2 mm	—	DIN 9021, ISO 7093	5	000000000	0000
				M10	10.5 mm	30.0 mm	2.3 mm to 2.7 mm	—	DIN 9021, ISO 7093	5	000000000	00000
				M12	13.0 mm	37.0 mm	2.7 mm to 3.3 mm	—	DIN 9021, ISO 7093	1	000000000	0000
				M14	15.0 mm	44.0 mm	2.7 mm to 3.3 mm	—	DIN 9021, ISO 7093	1	000000000	0000

Brass

Softer than most metals, brass washers won't damage other fastening components.

Brass—With a warm, polished look, these washers are often chosen for their appearance. Similar to 18-8 stainless steel, brass is corrosion resistant enough to stand up to wet environments.

	ID	OD	Thk.	Pkg. Qty.		Pkg.
Brass


	No. 2	0.094"	0.188"	0.014" to 0.033"	25	000000000	00000
	No. 4	0.125"	0.250"	0.049" to 0.068"	10	000000000	0000
	No. 6	0.156"	0.312"	0.049" to 0.068"	10	000000000	0000
	No. 8	0.172"	0.375"	0.049" to 0.068"	5	000000000	0000
	No. 8	0.188"	0.438"	0.064" to 0.083"	5	000000000	0000
	No. 10	0.203"	0.500"	0.079" to 0.099"	5	000000000	00000
	1/4"	0.281"	0.500"	0.064" to 0.083"	5	000000000	0000
	1/4"	0.281"	0.625"	0.105" to 0.130"	5	000000000	00000
	1/4"	0.281"	0.625"	0.167" to 0.193"	5	000000000	00000
	5/16"	0.344"	0.625"	0.079" to 0.098"	5	000000000	0000
	5/16"	0.344"	0.688"	0.105" to 0.130"	5	000000000	0000
	5/16"	0.344"	0.750"	0.105" to 0.130"	5	000000000	00000
	5/16"	0.344"	0.750"	0.167" to 0.193"	1	000000000	0000
	3/8"	0.406"	0.750"	0.079" to 0.098"	5	000000000	0000
	3/8"	0.406"	0.875"	0.105" to 0.130"	5	000000000	00000
	3/8"	0.406"	1.000"	0.105" to 0.130"	5	000000000	0000
	3/8"	0.406"	1.000"	0.167" to 0.193"	5	000000000	00000
	1/2"	0.531"	1.062"	0.167" to 0.192"	1	000000000	0000
	1/2"	0.531"	1.125"	0.105" to 0.130"	5	000000000	00000
	1/2"	0.531"	1.125"	0.167" to 0.193"	1	000000000	0000
	5/8"	0.656"	1.312"	0.198" to 0.223"	1	000000000	0000
	5/8"	0.656"	1.375"	0.105" to 0.130"	1	000000000	0000
	5/8"	0.656"	1.375"	0.167" to 0.193"	5	000000000	00000
	3/4"	0.781"	1.625"	0.136" to 0.161"	1	000000000	0000
	3/4"	0.781"	1.625"	0.230" to 0.255"	1	000000000	0000
	3/4"	0.812"	1.500"	0.198" to 0.223"	1	000000000	0000
	7/8"	0.906"	1.750"	0.136" to 0.161"	1	000000000	0000
	7/8"	0.906"	1.750"	0.230" to 0.255"	1	000000000	0000
	1"	1.031"	2.000"	0.167" to 0.193"	1	000000000	0000
	1"	1.031"	2.000"	0.261" to 0.286"	1	000000000	0000

Undersized Washers

These washers distribute pressure evenly under fasteners with narrow heads, such as cheese and socket head screws. They have smaller diameters than general purpose washers of the same screw size.

Stainless Steel About Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these washers resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these washers won't degrade when exposed to harsh weather, salt water, and most chemicals.

	ID	OD	Thk.	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel


	No. 2	0.094"	0.188"	0.014" to 0.033"	—	25	000000000	00000
	M1.6	1.7 mm	3.5 mm	0.3 mm to 0.4 mm	DIN 433	100	000000000	0000
	M3.5	3.7 mm	7.0 mm	0.5 mm to 0.6 mm	DIN 433	100	000000000	0000
	M12	13.0 mm	22.0 mm	2.5 mm to 3.4 mm	—	1	000000000	0000
	M14	15.0 mm	25.0 mm	2.5 mm to 3.4 mm	—	1	000000000	0000
	M16	17.0 mm	28.0 mm	3.0 mm to 3.9 mm	—	1	000000000	0000
	M18	19.0 mm	30.0 mm	2.3 mm to 2.7 mm	DIN 433	1	000000000	0000
	M20	21.0 mm	35.0 mm	3.0 mm to 3.9 mm	—	1	000000000	0000
	M24	25.0 mm	39.0 mm	3.7 mm to 4.3 mm	DIN 433	1	000000000	0000
	M24	25.0 mm	40.0 mm	3.5 mm to 4.4 mm	—	1	000000000	0000
	M30	31.0 mm	44.0 mm	3.5 mm to 4.4 mm	—	1	000000000	0000
	M36	37.0 mm	50.0 mm	4.5 mm to 5.4 mm	—	1	000000000	00000

	Black-Oxide 18-8 Stainless Steel


			M3	3.2 mm	6.0 mm	0.5 mm to 0.6 mm	DIN 433	100	000000000	0000
			M4	4.3 mm	8.0 mm	0.5 mm to 0.6 mm	DIN 433	100	000000000	00000
			M5	5.3 mm	9.0 mm	0.9 mm to 1.1 mm	DIN 433	100	000000000	00000
			M6	6.4 mm	11.0 mm	1.4 mm to 1.8 mm	DIN 433	100	000000000	00000
			M8	8.4 mm	15.0 mm	1.4 mm to 1.8 mm	DIN 433	50	000000000	00000

			Super-Corrosion-Resistant 316 Stainless Steel


					M2	2.2 mm	4.5 mm	0.3 mm to 0.4 mm	DIN 433	25	000000000	0000
					M2.5	2.7 mm	5.0 mm	0.5 mm to 0.6 mm	DIN 433	100	000000000	0000
					M14	15.0 mm	24.0 mm	2.3 mm to 2.7 mm	DIN 433	10	000000000	00000
					M24	25.0 mm	39.0 mm	3.7 mm to 4.3 mm	DIN 433	1	000000000	0000

					High-Strength 17-4 PH Stainless Steel


							5/8"	0.656"	1.375"	0.105" to 0.130"	—	1	000000000	0000

Steel

Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.

Zinc-Yellow-Chromate-Plated Steel—With the same corrosion resistance as zinc-plated steel, these withstand occasional exposure to moisture.

Steel—Best for dry environments since moisture will cause these washers to rust.

For Fastener Strength Grade/Class—If you require screws or nuts with a specific fastener strength rating, make sure your washer matches the grade or class.

	ID, mm	OD, mm	Thk., mm	For Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel


	M3	3.2	6.0	0.5 to 0.6	ISO Class 8.8	DIN 433	100	000000000	00000
	M3	3.2	6.0	0.5 to 0.6	ISO Class 10.9	DIN 433	100	000000000	0000
	M4	4.3	8.0	0.5 to 0.6	ISO Class 8.8	DIN 433	100	000000000	0000
	M4	4.3	8.0	0.5 to 0.6	ISO Class 10.9	DIN 433	100	000000000	00000
	M5	5.3	9.0	0.9 to 1.1	ISO Class 8.8	DIN 433	100	000000000	0000
	M5	5.3	9.0	0.9 to 1.1	ISO Class 10.9	DIN 433	100	000000000	00000
	M6	6.4	11.0	1.4 to 1.8	ISO Class 8.8	DIN 433	100	000000000	00000
	M6	6.4	11.0	1.4 to 1.8	ISO Class 10.9	DIN 433	50	000000000	00000
	M8	8.4	15.0	1.4 to 1.8	ISO Class 8.8	DIN 433	50	000000000	00000
	M8	8.4	15.0	1.4 to 1.8	ISO Class 10.9	DIN 433	25	000000000	0000
	M10	10.5	18.0	1.4 to 1.8	ISO Class 8.8	DIN 433	50	000000000	00000
	M10	10.5	18.0	1.4 to 1.8	ISO Class 10.9	DIN 433	25	000000000	0000
	M12	13.0	20.0	1.8 to 2.2	ISO Class 8.8	DIN 433	25	000000000	00000
	M12	13.0	20.0	1.8 to 2.2	ISO Class 10.9	DIN 433	25	000000000	00000
	M14	15.0	24.0	2.3 to 2.7	ISO Class 8.8	DIN 433	10	000000000	0000
	M14	15.0	24.0	2.3 to 2.7	ISO Class 10.9	DIN 433	10	000000000	00000
	M16	17.0	28.0	2.3 to 2.7	ISO Class 8.8	DIN 433	10	000000000	00000
	M16	17.0	28.0	2.3 to 2.7	ISO Class 10.9	DIN 433	10	000000000	0000
	M20	21.0	34.0	2.7 to 3.3	ISO Class 8.8	DIN 433	5	000000000	00000
	M20	21.0	34.0	2.7 to 3.3	ISO Class 10.9	DIN 433	5	000000000	0000
	M24	25.0	39.0	3.7 to 4.3	ISO Class 8.8	DIN 433	1	000000000	0000
	M24	25.0	39.0	3.7 to 4.3	ISO Class 10.9	DIN 433	1	000000000	0000

	Zinc-Yellow-Chromate-Plated Steel


			M4	4.3	8.0	0.5 to 0.6	ISO Class 10.9	DIN 433	100	000000000	00000
			M5	5.3	9.0	0.9 to 1.1	ISO Class 10.9	DIN 433	100	000000000	00000
			M6	6.4	11.0	1.4 to 1.8	ISO Class 10.9	DIN 433	50	000000000	00000
			M8	8.4	15.0	1.4 to 1.8	ISO Class 10.9	DIN 433	25	000000000	0000
			M10	10.5	18.0	1.4 to 1.8	ISO Class 10.9	DIN 433	25	000000000	0000
			M12	13.0	20.0	1.8 to 2.2	ISO Class 10.9	DIN 433	25	000000000	00000
			M14	15.0	24.0	2.3 to 2.7	ISO Class 10.9	DIN 433	10	000000000	00000
			M16	17.0	28.0	2.3 to 2.7	ISO Class 10.9	DIN 433	10	000000000	00000
			M20	21.0	34.0	2.7 to 3.3	ISO Class 10.9	DIN 433	5	000000000	00000

			Black-Oxide Steel


					M3	3.2	6.0	0.5 to 0.6	—	DIN 433	10	000000000	0000
					M5	5.3	9.0	0.9 to 1.1	—	DIN 433	50	000000000	00000
					M8	8.4	15.0	1.4 to 1.8	—	DIN 433	50	000000000	00000
					M10	10.5	18.0	1.4 to 1.8	—	DIN 433	50	000000000	0000
					M12	13.0	20.0	1.8 to 2.2	—	DIN 433	25	000000000	0000
					M12	13.0	22.0	2.5 to 3.4	—	—	10	000000000	0000
					M14	15.0	25.0	2.5 to 3.4	—	—	10	000000000	0000
					M16	17.0	28.0	3.0 to 3.9	—	—	10	000000000	0000
					M20	21.0	34.0	2.7 to 3.3	—	DIN 433	10	000000000	0000
					M20	21.0	35.0	3.0 to 3.9	—	—	10	000000000	00000
					M24	25.0	40.0	3.5 to 4.4	—	—	5	000000000	0000
					M30	31.0	44.0	3.5 to 4.4	—	—	5	000000000	00000
					M36	37.0	50.0	4.5 to 5.4	—	—	5	000000000	00000

					Blue-Dyed Steel


							M3	3.0	6.0	0.4 to 0.6	—	DIN 433	20	000000000	0000
							M4	4.0	8.0	0.4 to 0.6	—	DIN 433	20	000000000	0000
							M5	5.0	9.0	0.9 to 1.1	—	DIN 433	20	000000000	0000
							M8	8.0	15.0	1.4 to 1.8	—	DIN 433	20	000000000	0000

							Steel


							M5	5.3	9.0	0.9 to 1.1	—	DIN 433	100	000000000	0000
							M6	6.4	11.0	1.4 to 1.8	—	DIN 433	100	000000000	0000
							M8	8.4	15.0	1.4 to 1.8	—	DIN 433	100	000000000	0000
							M10	10.5	18.0	1.4 to 1.8	—	DIN 433	100	000000000	0000
							M12	13.0	20.0	2.3 to 2.7	—	DIN 433	100	000000000	00000
							M20	21.0	34.0	2.7 to 3.3	—	DIN 433	10	000000000	00000
							M24	25.0	39.0	3.7 to 4.3	—	DIN 433	5	000000000	00000

							Corrosion-Resistant Galvanized Steel


									M6	6.4	11.0	1.4 to 1.8	—	DIN 433	10	000000000	0000
									M8	8.4	15.0	1.4 to 1.8	—	DIN 433	10	000000000	0000
									M10	10.5	18.0	1.4 to 1.8	—	DIN 433	10	000000000	0000

									Black Super-Corrosion-Resistant-Coated Steel


											M6	6.4	11.0	1.4 to 1.8	—	DIN 433, ISO 7092	10	000000000	00000
											M8	8.4	15.0	1.4 to 1.8	—	DIN 433, ISO 7092	10	000000000	00000
											M10	10.5	18.0	1.4 to 1.8	—	DIN 433, ISO 7092	10	000000000	00000
											M12	13.0	20.0	1.8 to 2.2	—	DIN 433, ISO 7092	10	000000000	00000

Copper

These have the best conductivity of all our metal washers. They're often used to secure electrical connections inside breaker panels and to fasten components on printed circuit boards. They're also the softest of all our metal washers, so they won't damage screws and nuts. However, copper washers aren't as corrosion resistant as brass washers, and will develop a green patina over time.

	ID, mm	OD, mm	Thk., mm	Specs. Met	Pkg. Qty.		Pkg.
Copper


	M6	6.4	11.0	1.4 to 1.8	DIN 433	25	000000000	000000
	M8	8.4	15.0	1.4 to 1.8	DIN 433	10	000000000	00000