Ladders can be connected to create the height you need. They have textured steps for slip resistance.

Ladders with built-in connectors have built-in splices, so they can be connected to each other. Note: The first rung of the ladder cannot be more than 12" from the floor.

300-lb. capacity ladders use the connecting kit (sold separately) to connect ladders with no drilling required. Mount to the wall with the mounting bracket kit (sold separately). When ladder heights are greater than 20 feet from the floor to the top rung, a ladder cage can help prevent falls.

Connecting kits (sold separately) include splice plates and fasteners. Order one connecting kit for each additional ladder section.

Mounting bracket kits (sold separately) offset the ladder 7" for toe clearance. Kits include fasteners to mount brackets to the ladder; fasteners to mount brackets to a surface are not included. Two kits are recommended for 4-, 5-, and 8-foot ladders; three kits are recommended for the 10-foot ladder. If connecting multiple ladders, one mounting bracket kit is required for each additional ladder section.

Mounting bracket kits without mounting holes must be drilled to the desired bolt hole size to mount to your surface, so you can adapt it to your needs. For instance, use U-bolts (not included) to connect ladder to pipes.

Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.

Ladder and cage come unassembled for mounting flexibility and lower freight costs. Cages start between 7 and 8 feet from the ground and extend beyond the top rung by 42" with a walk-through exit. When ladder heights are greater than 20 feet from the floor to the top rung, a ladder cage can help prevent falls.

Optional security cover prevents unauthorized access. It covers five rungs and is secured by two hooks at the top and a U-clamp at the bottom.

Note: Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.

A cage is welded to these ladders for quick installation. Ladders come in sections no longer than 7 feet for easy handling—bolt sections together end-to-end (fasteners included). Cages start 7 feet above the bottom of the ladder and extend beyond the top rung by 42".

Optional security cover prevents unauthorized access. It can be welded or bolted on (holes must be drilled) to open from the right side.

Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.

When ladder heights are greater than 20 feet from the floor to the top rung, a ladder cage can help prevent falls. Each section is fully welded and mounts to the side rails of stationary ladders (not to walls or other cages) that have an overall width of 16" to 20".

Bottom sections flare out for entry and exit.

Middle/top sections extend the length of the cage or can act as a top section for hatch opening use.

Walk-through sections are required for walk-through applications and should extend 42" above the top rung.

Note: At least one middle/top section and one bottom section are required for a complete assembly.

Note: Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.

Ladders have serrated rungs for slip resistance and four smooth rungs at the top for hand grips. They mount to the wall with welded-on brackets.

Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.

Often used on loading docks, these ladders mount to the top of a wall or ledge. Ladders have serrated steps for maximum slip resistance.

Optional safety chain stretches across ladder to deter access.

Note: Ladders meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices.