About Fire-Fighting Hose Threads
More
Diverting Valves with Fire-Fighting Hose Fittings
- Valve Type: Ball
- For Use With: Water
- Seal Material: Buna-N Rubber
Control the flow of water in two directions from a single source—these diverting valves have two balls and handles for independent operation of each outlet. They can direct flow to one side outlet at full capacity while shutting off flow to the second side outlet, direct flow to both side outlets at reduced capacity, or shut off flow to both side outlets. Valves have a brass body for good corrosion resistance. They are for use with fire-fighting hose.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
NH/NST (National Hose/National Standard) threads are only compatible with other NH/NST threads. Male NPSH (National Pipe Straight Hose) threads are compatible with female NPSH threads. Female NPSH threads are compatible with male NPSH, NPT, NPTF, and NPSM threads.
For technical drawings and 3-D models, click on a part number.
| Inlet Fire Hose Trade Size | Outlet Fire Hose Trade Sizes | Flow Pattern | Flow Coefficient (Cv) | Max. Pressure | Temp. Range, °F | End-to-End Lg. | Each | |
Brass Body | ||||||||
|---|---|---|---|---|---|---|---|---|
| 2 1/2 | 1 1/2 × 1 1/2 | Y-Pattern | Not Rated | 300 psi @ 150° F | -20° to 150° | 5 5/8" | 000000 | 0000000 |
| Inlet Pipe Size  | Outlet Pipe Sizes | Flow Pattern | Flow Coefficient (Cv) | Max. Pressure | Temp. Range, °F | End-to-End Lg. | Each | |
Brass Body | ||||||||
|---|---|---|---|---|---|---|---|---|
| 2 1/2 | 1 1/2 × 1 1/2 | Y-Pattern | Not Rated | 300 psi @ 150° F | -20° to 150° | 5 5/8" | 000000 | 0000000 |
Fire-Fighting Hose Fittings
Connect these fittings to fire hydrants and washdown equipment. Made of brass, they have good corrosion resistance. Some have a hex in the middle so you can tighten them with a wrench.
NH/NST (National Hose/National Standard) threads are only compatible with other NH/NST threads. Male NPSH (National Pipe Straight Hose) threads are compatible with female NPSH threads. Female NPSH threads are compatible with male NPSH, NPT, NPTF, and NPSM threads.
For technical drawings and 3-D models, click on a part number.
Pin-Lug Fire-Fighting Hose Fittings
The pin lugs on these fittings allow for easy gripping, so you can quickly connect to fire hydrants and washdown equipment. Tighten with a hook-style spanner wrench (sold separately). All are brass for good corrosion resistance.
Fittings that swivel until tightened rotate to help prevent kinking during installation.
NH/NST (National Hose/National Standard) threads are only compatible with other NH/NST threads.
For technical drawings and 3-D models, click on a part number.
| Fire Hose Trade Size | Pipe Size | Material | Each | |
| 1 1/2 | 1 1/2 | Brass | 0000000 | 000000 |
| Fire Hose Trade Size | Pipe Size | Material | Each | |
| 1 1/2 | 1 1/2 | Brass | 0000000 | 000000 |
| Pipe Size | Fire Hose Trade Size | Material | Each | |
| 1 1/2 | 1 1/2 | Brass | 0000000 | 000000 |
| Fire Hose Trade Size (A) | Pipe Size (B) | Material | Each | |
| 2 1/2 | 2 | Brass | 0000000 | 0000000 |
| Pipe Size (A) | Fire Hose Trade Size (B) | Material | Each | |
| 2 | 2 1/2 | Brass | 0000000 | 0000000 |
Rocker-Lug Fire-Fighting Hose Fittings
The rocker lugs on these fittings allow for easy gripping, so you can quickly connect to fire hydrants and washdown equipment. Tighten with a hook-style spanner wrench (sold separately).
Fittings that swivel until tightened rotate to help prevent kinking during installation.
NH/NST (National Hose/National Standard) threads are only compatible with other NH/NST threads. Male NPSH (National Pipe Straight Hose) threads are compatible with female NPSH threads. Female NPSH threads are compatible with male NPSH, NPT, NPTF, and NPSM threads.
Aluminum fittings are more lightweight than brass fittings. They have good abrasion and corrosion resistance. Brass fittings are softer than aluminum fittings, so they’re easier to thread together. They have good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| Fire Hose Trade Size | Pipe Size | Each | |
Aluminum | |||
|---|---|---|---|
| 1 1/2 | 1 1/2 | 0000000 | 000000 |
| Pipe Size | Each | |
Aluminum | ||
|---|---|---|
| 1 1/2 | 0000000 | 000000 |
| Pipe Size | Each | |
Aluminum | ||
|---|---|---|
| 2 | 0000000 | 000000 |
| Pipe Size | Fire Hose Trade Size | Each | |
Aluminum | |||
|---|---|---|---|
| 2 1/2 | 2 1/2 | 0000000 | 0000000 |
| Pipe Size | Each | |
Aluminum | ||
|---|---|---|
| 1 1/2 | 0000000 | 000000 |
Fire Hose Trade Size | |||
|---|---|---|---|
| (A) | (B) | Each | |
Aluminum | |||
| 2 1/2 | 2 | 0000000 | 000000 |
Metal Garden Hose Fittings for Drinking Water
These fittings meet NSF/ANSI Standard 61 for drinking water. Connect them to rubber or plastic garden hose for a variety of water supply applications. Fittings are brass for good corrosion resistance.
Fittings that swivel until tightened rotate 360° for easy installation.
Fittings with a barbed end are also known as hose menders and splicers. Use them to connect lengths of hose or to repair damaged hose. To connect, slide the barbed end into rubber or plastic hose and secure with a clamp.
For technical drawings and 3-D models, click on a part number.
- Maximum Pressure: 150 psi @ 72° F
- Attachment Type: Use Worm-Drive Clamps
- Specifications Met: NSF/ANSI 61
| For Hose ID | Pipe Size | Each | |
Brass | |||
|---|---|---|---|
| 1" | 1 | 0000000 | 000000 |
- Maximum Pressure: 150 psi @ 72° F
- Attachment Type: Use Worm-Drive Clamps
- Specifications Met: NSF/ANSI 61
| For Hose ID | Pipe Size | Washer Material | Each | |
Brass | ||||
|---|---|---|---|---|
| 1" | 1 | EPDM Rubber | 0000000 | 000000 |
Spray and Stream Nozzles for Fire-Fighting Hose
Twist the barrel to adjust water flow. Nozzles have a textured barrel for grip and a rubber bumper for impact resistance.
Polycarbonate nozzles are durable and lightweight.
Brass nozzles are more durable than aluminum nozzles.
Aluminum nozzles are lighter than brass nozzles.
Nozzles | Replacement Gaskets | |||||||
|---|---|---|---|---|---|---|---|---|
| Hose Size | Pipe Size | Flow Rate | Dia. | Lg. | Each | Each | ||
NH/NST Female | ||||||||
Polycarbonate | ||||||||
| 1 | __ | 22 gpm @ 100 psi | 2 3/4" | 4 3/4" | 00000000 | 000000 | 00000000 | 00000 |
| 1 1/2 | __ | 75 gpm @ 100 psi | 2 3/4" | 4 5/8" | 00000000 | 00000 | 00000000 | 0000 |
| 2 1/2 | __ | 150 gpm @ 100 psi | 3 1/2" | 9 1/8" | 00000000 | 000000 | 00000000 | 0000 |
Brass | ||||||||
| 1 | __ | 36 gpm @ 100 psi | 2" | 3 1/4" | 0000000 | 00000 | 000000 | 00 |
| 1 1/2 | __ | 95 gpm @ 100 psi | 2 1/2" | 3 1/2" | 000000 | 00000 | 0000000 | 0000 |
UL Listed Brass | ||||||||
| 1 1/2 | __ | 95 gpm @ 100 psi | 2 11/16" | 5 13/16" | 0000000 | 000000 | 000000 | 00 |
| 2 1/2 | __ | 205 gpm @ 100 psi | 3 1/4" | 4 1/2" | 0000000 | 000000 | 000000 | 00 |
Aluminum | ||||||||
| 1 | __ | 24 gpm @ 100 psi | 2 3/4" | 4" | 0000000 | 000000 | 000000 | 00 |
| 1 1/2 | __ | 60 gpm @ 100 psi | 2 3/4" | 4 1/2" | 0000000 | 000000 | 000000 | 00 |
NPSH Female | ||||||||
Polycarbonate | ||||||||
| __ | 3/4 | 8 gpm @ 100 psi | 2 3/4" | 4 3/4" | 00000000 | 00000 | 00000000 | 000 |
| __ | 1 | 22 gpm @ 100 psi | 2 3/4" | 4 3/4" | 00000000 | 00000 | 00000000 | 000 |
| __ | 1 1/2 | 75 gpm @ 100 psi | 2 3/4" | 4 5/8" | 00000000 | 00000 | 00000000 | 0000 |
| __ | 2 | 140 gpm @ 100 psi | 3 1/4" | 5 3/8" | 0000000 | 00000 | 00000000 | 0000 |
Brass | ||||||||
| __ | 1 | 36 gpm @ 100 psi | 2" | 3 1/4" | 0000000 | 00000 | 000000 | 00 |
| __ | 1 1/2 | 95 gpm @ 100 psi | 2 1/2" | 3 1/2" | 0000000 | 00000 | 0000000 | 0000 |
| __ | 2 | 108 gpm @ 100 psi | 3" | 5" | 0000000 | 000000 | 000000 | 00 |
UL Listed Brass | ||||||||
| __ | 1 1/2 | 95 gpm @ 100 psi | 2 11/16" | 5 13/16" | 0000000 | 000000 | 000000 | 00 |
Aluminum | ||||||||
| __ | 1 | 24 gpm @ 100 psi | 2 3/4" | 4" | 0000000 | 000000 | 000000 | 00 |
| __ | 1 1/2 | 60 gpm @ 100 psi | 2 3/4" | 4 1/2" | 0000000 | 000000 | 000000 | 00 |
Quick-Flow Stream Nozzles for Fire-Fighting Hose
There’s no shut-off valve on these nozzles, so they provide instant water flow.
For technical drawings and 3-D models, click on a part number.
| Hose Size | Pipe Size | Flow Rate | Dia. | Lg. | Spray End Dia. | Each | |
NH/NST Female | |||||||
|---|---|---|---|---|---|---|---|
Plastic | |||||||
| 1 1/2 | __ | 73 gpm @ 100 psi | 2 7/16" | 10" | 1/2" | 0000000 | 000000 |
Brass | |||||||
| 1 | __ | 28 gpm @ 100 psi | 1 3/8" | 8" | 5/16" | 0000000 | 00000 |
| 1 1/2 | __ | 73 gpm @ 100 psi | 2" | 10" | 1/2" | 0000000 | 00000 |
| 2 1/2 | __ | 168 gpm @ 100 psi | 3 1/16" | 12" | 3/4" | 0000000 | 00000 |
NPSH Female | |||||||
Plastic | |||||||
| __ | 1 1/2 | 73 gpm @ 100 psi | 2 7/16" | 10" | 1/2" | 0000000 | 00000 |
Brass | |||||||
| __ | 1 | 28 gpm @ 100 psi | 1 19/64" | 8" | 5/16" | 0000000 | 00000 |
| __ | 1 1/2 | 73 gpm @ 100 psi | 1 7/8" | 10" | 1/2" | 0000000 | 00000 |
| __ | 2 1/2 | 168 gpm @ 100 psi | 2 27/32" | 12" | 3/4" | 0000000 | 00000 |
Lever-Activated Stream Nozzles for Fire-Fighting Hose
Use the lever to turn water flow on and off. A rubber bumper provides impact resistance.
For technical drawings and 3-D models, click on a part number.
Color-Coded Quarter-Turn Shut-Off Valves for Hot and Cold Water
Quickly identify hot and cold water lines with these red or blue valves. The low-profile elbow shape and small handle are made to fit into tight spaces, such as plumbing outlet boxes (sold separately). Connect the NH/NST threads to a water hose on a washing machine or commercial plumbing fixture.
Valves with a solder-connect inlet are used for copper water lines.
Valves with a barbed inlet are compatible with Viega PEX tubing; attach them to your line with a crimping tool and crimping ring (both sold separately).
90° Elbow | ||||||
|---|---|---|---|---|---|---|
| For Inlet Tube OD | For Inlet Copper Tube Size | Outlet Hose Size | Handle Material | Choose a Handle Color | Each | |
Brass | ||||||
| 5/8" | 1/2 | 3/4 | Powder-Coated Aluminum | 0000000 | 000000 | |
Inlet—For
Hot Water
Inlet—For
Cold Water
90° Elbow | |||||||
|---|---|---|---|---|---|---|---|
| For Inlet Tube ID | Outlet Hose Size | Handle Material | Compatible With | Specifications Met | Choose a Handle Color | Each | |
Brass | |||||||
| 1/2" | 3/4 | Powder-Coated Aluminum | Viega PEX | ASTM F1807 | 0000000 | 000000 | |
| Wd. | Ht. | Dp. | Material | Mounting Fasteners Included | Number of Mounting Holes | Mounting Hole Dia. | Each | |
| 10 1/4" | 6 3/4" | 2 1/2" | PVC Plastic | No | 36 | 1/8" | 0000000 | 000000 |