Use fingerprints to confirm the identity of personnel before granting access to secure areas or equipment. Switches light up green to indicate that they have accepted the fingerprint and are sending an output signal. The front faces of the switches meet NEMA 12 and IP65. The rear faces of the switches meet IP20.

Covers (sold separately) have an adhesive-back hinge, so you can stick them on to your switch. Keep the cover flipped down to protect the switch’s sensor from dust and debris.

For technical drawings and 3-D models, click on a part number.

Suitable for areas with space limitations, these switches have a low profile and a small footprint. They lay flat or mount to a wall. Typically used in start/stop and door opening applications, switches can also be placed underneath objects to alert when the object is removed. All have a sealed housing that resists water and alcohols (not suitable for continuous contact).

Optional mounting frames secure switches to a wall or bench top.

It takes two hands to activate these switches, minimizing the risk of accidental equipment start up. They have an emergency stop push-button to immediately cut power. They’re rated IP65 for protection from low-pressure washdowns.

Switches with finger-touch actuators turn circuits on and off with a light touch, even when wearing gloves. An infrared sensor detects the lightest finger contact, and an indicator lights up to confirm when they are activated. Because they don't require you to press down a button to operate, they meet ANSI B11.TR1 standards to reduce hand, wrist, and arm fatigue. You'll need a relay or controller to complete your system—upgrade to a controller if you plan to operate additional devices beyond your switch.

Safety controller expansion modules can be added to safety controllers to increase the number of inputs.

Telescoping stands can be added to switches with finger-touch actuators to mount them away from a wall. The stands telescope to adjust the height of the switch and tilt to adjust the angle of the switch.

For technical drawings and 3-D models, click on a part number.

Flat and completely smooth, these switches are easy to wipe down. They’re rated NEMA 3R, so they seal out water that could damage the circuitry. They also won’t corrode from mild cleaning solutions. With just a light tap, you can switch lights on and off, even if you’re wearing gloves.

Switches with a stainless steel wall plate resist wear and tear better than switches with a plastic wall plate.

Also known as HMIs, program these touch-screen interfaces to control PLCs, inverters, and other automated equipment. The LCD screen provides easily visible data output to control your operation. Load software from a USB flash drive or via the Ethernet connection.

For technical drawings and 3-D models, click on a part number.

From factory floors to outdoor installations, these monitors handle tough conditions. These are not your average monitors—a metal bezel protects them from bumps, scratches, and other damage. No flimsy plastic in sight. They’ll also do their job across a wide range of temperatures, so you can use them in hot or cold conditions without any lag. No internal fan means no need to worry about that as a point of failure or an opportunity for dust and debris to damage internal components. IP rated when mounted in a panel or enclosure, the front panel is sealed to handle dust and spaces that are frequently rinsed clean. As expected of something built to last, they meet safety standards.

The touchscreen gives you an intuitive and versatile HMI (human-machine interface) with a bright display, ensuring you can see readings no matter the lighting conditions. Scroll or zoom to check data, but keep in mind that these monitors won’t work with gloves unless they’re touchscreen compatible.

Mount them in a panel cutout or enclosure with the included panel mounting clamps. You can also attach these monitors to a bracket or positioning arm with a compatible VESA mounting hole pattern. All monitors come with a power adapter and cord that plugs into a standard outlet.

IP69K/IP50 rated monitors have a front panel that resists high-pressure washdowns when mounted in an enclosure. The rear of these monitors is IP50 rated for protection against dust. They also meet MIL-STD-810, a rigorous military performance test for shock and vibration resistance.