We will reply to your message within an hour.
More
An SMC filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A Wilkerson filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A Norgren filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
An ARO filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A Parker filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
An ASCO Numatics filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
A Festo filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.
No need for thread adapters—these filter/regulator/lubricators have an NPT inlet and a BSPP outlet.
A filter, regulator, and lubricator with push-to-connect fittings are combined to provide clean, lubricated compressed air at your required pressure. Fittings make a tight seal around tubing.
With one outlet port before the lubricator and one after, these filter/regulator/lubricators work in systems that require lubrication in some lines but not in others.
Connect SMC modular filter/regulator/lubricator components with the same series number.
Connect Norgren modular filter/regulator/lubricator components with the same series number.
Connect Wilkerson modular filter/regulator/lubricator components with the same series number.
Connect ASCO Numatics modular filter/regulator/lubricator components with the same series number.
Connect Parker modular filter/regulator/lubricator components with the same series number.
Connect ARO modular filter/regulator/lubricator components with the same series number.
Connect Festo modular filter/regulator/lubricator components with the same series number.
These filter/regulator combinations come as one convenient unit that cleans the air as it regulates pressure.
A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.
Assembled, inspected, and packaged in a clean environment, these filter/regulators come sealed in antistatic double bags.
With ±0.2 psi accuracy, these filter/regulators provide more precise control than our other compressed air filter/regulators.
A clear polyurethane bowl makes these filter/regulators chemical resistant for use with synthetic compressor oils and cleaning fluids and allows you to see inside to monitor contents.
A stainless steel housing and bowl allow these filter/regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.
No need for thread adapters—these filter/regulators have an NPT inlet and a BSPP outlet.
Mount these filter/regulators to a 35 mm DIN rail with the included brackets.
Use a single air supply to distribute air to up to four locations. In addition to the outlet for inline connection, these manifolds have three 1/4 NPT female outlets for connection to air-powered tools and equipment.
An oil filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.
Two-stage filtration is like getting two filters in one—the first stage removes large particles, while the second removes fine particles.
Swap out Wilkerson modular filter/regulator/lubricator components without unthreading your air line connections.
Swap out Norgren modular filter/regulator/lubricator components without unthreading your air line connections.
Swap out ARO modular filter/regulator/lubricator components without unthreading your air line connections.
Swap out Festo modular filter/regulator/lubricator components without unthreading your air line connections.
Filter and lubricator in one, these filter/lubricators provide clean, lubricated compressed air to extend the service life of tools and equipment.
Prevent accidental start-up when servicing equipment.
Also known as Monday-morning valves, these valves slowly introduce pressure to reduce surge damage during start-up.
Replace a damaged bowl, or change the bowl material or drain type on your SMC modular compressed air filter.
Replace a damaged bowl, or change the bowl material or drain type on your Norgren modular compressed air filter.
Replace a damaged bowl, or change the bowl material or drain type on your Wilkerson modular compressed air filter.
Replace a damaged bowl, or change the bowl material or drain type on your Parker modular compressed air filter.
Replace a damaged bowl, or change the bowl material or drain type on your ARO modular compressed air filter.
Replace a damaged bowl, or change the bowl material on your ASCO Numatics modular compressed air filter.
Replace a damaged bowl, or change the drain type on your Festo modular compressed air filter.
Replace the filter element in your SMC modular compressed air filter to trap solid particles and water droplets as small as 5 microns.
Replace the filter element in your Norgren modular compressed air filter to trap solid particles and water droplets as small as 5 microns.
Replace the filter element in your ARO modular compressed air filter to trap solid particles and water droplets.
Replace the filter element in your Wilkerson modular compressed air filter to trap solid particles and water droplets as small as 5 microns.
Replace the filter element in your Parker modular compressed air filter to trap solid particles and water droplets.
Replace the filter element in your ASCO Numatics modular compressed air filter to trap solid particles and water droplets as small as 5 microns.
Replace the filter element in your Festo modular compressed air filter to trap solid particles and water droplets as small as 5 microns.
Also known as coalescing filters, these filter elements fit in SMC modular compressed air filters to remove oil and particles as small as 0.01 microns.
Also known as coalescing filters, these filter elements fit in Wilkerson modular compressed air filters to remove oil and fine particles.
Also known as coalescing filters, these filter elements fit in Festo modular compressed air filters to remove oil and particles as small as 0.01 microns.
Also known as coalescing filters, these filter elements fit in ASCO Numatics modular compressed air filters to remove oil and particles as small as 0.01 microns.
Also known as coalescing filters, these filter elements fit in Norgren modular compressed air filters to remove oil and particles as small as 0.01 microns.
Also known as coalescing filters, these filter elements fit in ARO modular compressed air filters to remove oil and particles as small as 0.3 microns.
Also known as coalescing filters, these filter elements fit in Parker modular compressed air filters to remove oil and particles as small as 0.01 microns.
These filter elements fit in ASCO Numatics modular two-stage compressed air filters to remove water droplets, oil, and particles as small as 0.01 microns.
Replace failing or lost O-rings in SMC modular compressed air filters.
Replace failing or lost O-rings in Wilkerson modular compressed air filters.
Replace failing or lost O-rings and gaskets in Norgren modular compressed air filters.
Replace failing or lost O-rings in Festo modular compressed air filters.
Replace failing or lost O-rings in ASCO Numatics modular compressed air filters.
Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.
A polyurethane bowl provides good chemical resistance for use with synthetic compressor oils and cleaning fluids.
Assembled, inspected, and packaged in a clean environment, these filters come sealed in anti-static double bags.
An automatic drain discharges up to 300 gallons per hour to handle compressed air with high moisture content.
The housing and bowl are 316 stainless steel to handle extremely corrosive environments such as those in semiconductor, marine, chemical, and paper industries.
Mount these filters to a 35 mm DIN rail with the included brackets.
Use these filters to extend the service life of air-powered tools and then throw them away when you're done.
Use these filters where high water and dirt removal is needed—they have a two-layer filter element made of stainless steel wire mesh and cotton/polyester packing.
Protect small air-powered tools, such as impact wrenches, ratchet wrenches, grinders, and screwdrivers.
Get two stages of filtration—the first stage removes most particles and water droplets; the second captures any remaining particles and water droplets down to 5 microns.
No need to buy and service two filters—these filters have a single element that removes both large and fine particles.
Generate clean air for instrumentation and applications with critical air requirements.
Housing and bowl are 304 stainless steel for good corrosion resistance in damp environments.
Often used in medical device manufacturing and food-processing facilities, these filters have a stainless steel element that can be sterilized in an autoclave.
Remove bacteria, viruses, moisture, and other particles from compressed air and gases used in food, pharmaceutical, biotech, and electronics applications.
Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.
Use these filters to extend the service life of air-powered tools and equipment and then throw them away when you're done.
A polyurethane bowl offers good chemical resistance for use with synthetic compressor oils and aggressive cleaning agents.
Housing and bowl are 316 stainless steel to handle extremely corrosive environments and meet NACE (National Association of Corrosion Engineers) specifications.
Designed for use in main lines with high contamination, these filters remove oil to extend the service life of air-powered tools and equipment.
Eliminate small traces of oil vapor and its associated odor with these filters and then throw them away when you're done.
Use these filters in applications where high-quality air is critical. They remove particles down to 0.003 microns, eliminating small traces of oil vapor and its associated odor.
Replace a damaged bowl on your Norgren modular compressed air lubricator.
Replace a damaged bowl, or change the bowl material on your Parker modular compressed air lubricator.
Replace a damaged bowl, or change the bowl material on your ARO modular compressed air lubricator.
Replace a damaged bowl, or change the bowl material on your Wilkerson modular compressed air lubricator.
Replace a damaged bowl, or change the bowl material on your SMC modular compressed air lubricator.
Replace a damaged bowl, or change the bowl material on your ASCO Numatics modular compressed air lubricator.
Replace a damaged bowl on your Festo modular compressed air lubricator.
Replace a cracked or lost sight dome on your Wilkerson modular compressed air lubricator.
Replace a cracked or lost sight dome on your Parker modular compressed air lubricator.
Replace a cracked or lost sight dome on your SMC modular compressed air lubricator.
Replace a cracked or lost sight dome on your Norgren modular compressed air lubricator.
Add lubrication to your air supply to extend the service life of air-powered tools and equipment.
Install one of these lubricators at the point of use to lubricate your air-powered hand tools.
Mount these lubricators to a 35 mm DIN rail with the included bracket.
Adjust and maintain the pressure of your compressed air.
An internal check valve permits reverse flow, so these regulators work with double-acting cylinders.
Designed for installation directly to your air-powered tool, these regulators maintain the set air pressure.
No need to worry about unintentional changes to your pressure setting—these regulators maintain a fixed outlet pressure.
Mount these regulators to a 35 mm DIN rail with the included brackets.
Cleaned and double bagged in an ISO Class 3 and Fed. Spec. Class 1 clean room for protection from contamination, these regulators are suitable for use in clean rooms.
A lower profile than our other compressed air regulators makes these regulators a better fit in tight spots.
A 316 stainless steel housing allows these regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.
Use these regulators to adjust and maintain the pressure of your tubing air lines.
Prevent unauthorized adjustment and unintentional pressure changes with these regulators.
Mount these regulators to a 35 mm DIN rail or a wall with one of the two included brackets.
View and control output pressure remotely and at the source.
At ±0.1% accuracy, use these regulators in sensitive applications where constant, consistent pressure is important.
A pressure-calibrated dial allows for easy adjustments to outlet pressure in high-flow applications.
A 316 stainless steel housing provides superior corrosion resistance and meets NACE (National Association of Corrosion Engineers) material requirement MR-01-75.
Mount these regulators to a 35 mm DIN rail with the included bracket.
Designed for control applications that require high reliability and repeatability, these regulators translate electrical signals to output pressure.
Keep an eye on the output pressure in high-flow applications—these regulators have a display so you can monitor your application locally.
Fit these regulators in tight spaces to adjust and maintain air pressure in sensitive applications where constant, consistent pressure is important.
With a greater flow capacity than our standard precision compressed air regulators, use these regulators to adjust and maintain air pressure in sensitive high-flow applications where constant, consistent pressure is important.
Use a single air supply to meet the pressure requirements of multiple applications—connect one of these manifolds to your air line, and then set a different output pressure for each station.
Connect two or more of these manifold regulators to meet multiple pressure requirements from a single air supply—set a different output pressure with each regulator.
Run up to four air-powered tools from a single air supply.
It's like getting four regulators in one—each comes with four springs so you can change between regulating pressure ranges of 2-30, 10-50, 30-90, and 100-180 psi.
Prevent changes to your pressure setting—these valves come set at a nonadjustable outlet pressure.
Maintain contaminant-free standards in clean room environments. These valves come cleaned and bagged to Fed. Spec. Class 100 and ISO Class 5 clean room standards and have a 316 stainless steel body with a smooth finish to resist dust collection.