We will reply to your message within an hour.
More
Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.
An easy way to make repairs in the field. Cut patches to size, peel off the backing, and press into place. Expose them to sunlight or a UV lamp and they begin to harden immediately.
Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.
Use these two-part fillers to rebuild cracked or worn plastic surfaces.
Repair worn and torn rubber parts. These two-part fillers are self leveling and form a tough, flexible new surface. They're often used with conveyor belts, mill liners, and pumps.
Made from silicone, these sealants are RTV (room-temperature vulcanizing).
These sealants include a material certificate with traceable lot number, test report, and product shelf life.
Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.
Compliant with ASTM E-595, these sealants produce almost no volatile materials in a vacuum.
A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.
Meeting requirements for semiconductor, biomedical, and electronics clean rooms, these sealants won’t contaminate air and surfaces.
Apply these sealants in cold temperatures, on wet surfaces, and even through running water.
Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.
These sealants are marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.
These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.
Impervious to the swelling effects of oil, fuel, and solvents, use these high-strength sealants to assemble and repair fuel systems and tanks.
Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.
Form flexible water-resistant seals on metal, plastic, and rubber joints in heating, ventilation, air conditioning, and refrigeration applications.
These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Prepare joints and surfaces to ensure proper sealant adhesion.
Fix roof leaks in cold and wet conditions. These sealants can even be applied underwater.
For quick repairs, these epoxies begin to harden in 6 minutes or less.
With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions.
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals.
Assortments include eight different epoxies in 0.1-oz. packets to handle a variety of small jobs.
Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these epoxies.
To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.
Bond most materials without the strong odor of other epoxy adhesives.
Acrylics bond to the widest range of materials, especially plastics, and require the least amount of surface preparation.
Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds.
With high shear strength and peel strength, these form the strongest bonds of our urethane adhesives.
Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.
Use these adhesives in applications that are highly sensitive to contaminants.
These adhesives withstand temperatures of 390° F or more.
Accommodate joint movement with these adhesives that remain pliable when cured.
In especially damp or humid environments, these adhesives keep their hold.
Form bonds in 5 seconds or less.
Fasten hard-to-bond plastics, such as polypropylene and polyethylene.
To invisibly bond transparent plastics, these adhesives won’t turn cloudy.
Form bonds without the strong odor of other instant-bond adhesives.
Make strong, instant bonds on a variety of materials—but not your skin.
Also known as super glue, these adhesives bond quickly.
Mixed with rubber for better impact resistance than standard instant-bond adhesives, these adhesives form strong, resilient bonds.
These thick gels fill gaps up to 0.2" wide—the largest of any of our instant-bond adhesives.
These super glues are blended with rubber for better impact and moisture resistance than other instant-bond adhesives.
Use these thick gels, also known as super glue, on vertical surfaces or to fill gaps between parts.
Bond plastics, porous materials, or dirty surfaces.
These adhesives withstand temperatures up to 480° F.
These thin liquids, also known as super glue, flow into small gaps.
For faster bonding, these adhesives begin to harden in half the time of our other wicking instant-bond adhesives.
For easy positioning, these adhesives begin to harden only when exposed to light.
Apply these adhesives on two surfaces, air dry, and then bring together to bond.
Bond glass and stone to drywall, treated lumber, and subfloors.
Adhere vinyl and rubber wall bases to wood, drywall, and concrete.
Bond and repair nosing and stair treads with this thick, two-part epoxy.
Install vinyl and rubber treads on stairs with this adhesive.
Form bonds with twice the strength of our other spray adhesives.
These adhesives come in a can.