Join copper, copper-silicon, and copper-zinc to themselves and to steel.

Join metal in inert atmospheres or vacuum conditions, such as furnace brazing.

Use these brazing alloys with a variety of metals.

Fill in tight gaps without needing to add flux before you braze—these alloys have flux built in. When melted, these alloys form a thin liquid that easily flows into smaller gaps than standard brazing alloys.

Use these alloys on metal subject to corrosion.

No need to add flux—these alloys have it built in.

Join aluminum to copper and copper-based alloys, such as brass and bronze.

Also known as trimetal brazing strips, these alloys have silver with nickel alloy sides and a copper core.

Join copper and copper alloys in general purpose applications.

Use this flux with silver and copper-based brazing alloys to clean and prepare surfaces.

This bismuth-tin solder has similar performance properties to lead solder, but is also safe for use in food-processing equipment and copper water pipes.

Even as temperatures approach absolute zero, this indium solder remains soft and malleable, allowing it to form an airtight seal between metal and certain non-metal materials..

The silver in this solder helps it resist vibration to form strong joints in HVAC systems. Since it doesn’t have a flux core, you can choose the flux that works best for your application.

Made with indium this solder is soft and malleable—even as temperatures approach absolute zero—allowing this solder to form an airtight seal between metal and certain non-metal materials. Thanks to its ribbon shape, this solder is easier to use on large, flat areas than wire solder.

The flux leaves minimal residue so there's no cleanup.

The flux leaves minimal residue so there's no cleanup.

This solder keeps its strength in applications where vibration and frequent and extreme temperature changes occur, such as in water lines and refrigeration equipment.

Rosin flux is quick acting with strong cleaning action, but leaves residue that requires flux remover.

Acid flux has strong cleaning action, but leaves corrosive residue that washes away with water.

This solder is commonly used in solder melting pots.

The high melting point prevents remelting when soldering successive joints with another solder.

Acid flux has strong cleaning action, but leaves corrosive residue that washes away with water.

This solder is commonly used in solder melting pots

Rosin flux is quick acting with strong cleaning action, but it leaves residue that requires flux remover.

The five flux cores in this solder allow fast soldering that uses solder efficiently and reduces the heat to your joint. The flux it’s filled with leaves minimal residue so there’s no cleanup. This solder is electrically conductive, making it good for electronics and electrical applications.

The flux residue easily washes away with water.

This flux has strong cleaning action and leaves residue that will not compromise the reliability of the joint.

This flux leaves minimal residue so there's no cleanup. It cleans and prepares electrical assemblies and printed circuit boards for soldering.

Fortified with tin, this flux protects nondrinking water pipes from oxidation, especially under temperatures up to 600° F.