About Hammers
More
Choose-a-Color Adjustable Handles
Identify equipment controls and components at a glance by their color. Also known as clamping handles, use these handles for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten. Made of plastic, all of these handles resist oil, grease, and solvents. The fiberglass-reinforced handles provide added strength.
Threaded-hole handles install on a threaded stud.
For technical drawings and 3-D models, click on a part number.
Thread | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Size | Dp. | Handle Lg. | Projection | Hub Projection | Insert Material | Temp. Range, °F | Choose a Color | Each | |
Threaded Hole | |||||||||
Fiberglass-Reinforced Plastic | |||||||||
| 8-32 | 3/8" | 1 9/16" | 1 3/16" | 15/16" | Black-Oxide Steel | -40° to 220° | 0000000 | 00000 | |
| 10-24 | 3/8" | 1 9/16" | 1 3/16" | 15/16" | Black-Oxide Steel | -40° to 220° | 0000000 | 0000 | |
| 10-32 | 3/8" | 1 9/16" | 1 3/16" | 15/16" | Black-Oxide Steel | -40° to 220° | 0000000 | 0000 | |
Nonmarring Adjustable Handles
The brass tip on the end of the threaded stud prevents damage to surfaces in applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten. These handles are also known as clamping handles. Made of plastic, all of these handles resist oil, grease, and solvents. They are reinforced with fiberglass for strength. Mount them into a threaded hole.
Thread | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Stud Lg., mm | Handle Lg., mm | Projection, mm | Hub Projection, mm | Stud Material | Temp. Range, °F | Features | Each | |
Threaded Stud | ||||||||||
Black Fiberglass-Reinforced Plastic | ||||||||||
| M6 | 1 | 20 | 40 | 30 | 25 | Steel | -40° to 220° | Brass Tip | 0000000 | 000000 |
| M6 | 1 | 30 | 40 | 30 | 25 | Steel | -40° to 220° | Brass Tip | 0000000 | 00000 |
| M6 | 1 | 40 | 40 | 30 | 25 | Steel | -40° to 220° | Brass Tip | 0000000 | 00000 |
| M8 | 1.25 | 20 | 65 | 42 | 29 | Steel | -40° to 220° | Brass Tip | 0000000 | 00000 |
| M8 | 1.25 | 30 | 65 | 42 | 29 | Steel | -40° to 220° | Brass Tip | 0000000 | 00000 |
| M8 | 1.25 | 40 | 65 | 42 | 29 | Steel | -40° to 220° | Brass Tip | 0000000 | 00000 |
Static-Control Adjustable Handles
With a minimum surface resistance of 10,000 ohms, these handles reduce static electricity that can damage electronic equipment. Also known as clamping handles, use them for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten. Made of plastic, all of these handles resist oil, grease, and solvents. They are reinforced with fiberglass for strength.
Threaded-stud handles mount into a threaded hole.
Threaded-hole handles install on a threaded stud.
Thread | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Dp., mm | Stud Lg., mm | Handle Lg., mm | Projection, mm | Hub Projection, mm | Stud Material | Insert Material | Surface Resistance, ohms | Temp. Range, °F | Specifications Met | Each | |
Threaded Stud | |||||||||||||
Black Fiberglass-Reinforced Plastic | |||||||||||||
| M6 | 1 | __ | 20 | 65 | 42 | 29 | Steel | __ | 104-109 | -40° to 220° | DIN EN 61340-5-1 | 0000000 | 000000 |
| M8 | 1.25 | __ | 20 | 65 | 42 | 29 | Steel | __ | 104-109 | -40° to 220° | DIN EN 61340-5-1 | 0000000 | 00000 |
| M10 | 1.5 | __ | 20 | 65 | 42 | 29 | Steel | __ | 104-109 | -40° to 220° | DIN EN 61340-5-1 | 0000000 | 00000 |
Threaded Hole | |||||||||||||
Black Fiberglass-Reinforced Plastic | |||||||||||||
| M6 | 1 | 12 | __ | 65 | 42 | 29 | __ | Steel | 104-109 | -40° to 220° | DIN EN 61340-5-1 | 0000000 | 00000 |
| M8 | 1.25 | 12 | __ | 65 | 42 | 29 | __ | Steel | 104-109 | -40° to 220° | DIN EN 61340-5-1 | 0000000 | 00000 |
Strap Handles
Use this handle on cans, hoses, ladders, and other objects that weigh up to 30 lbs. It has hook-and-loop straps to secure it around hard-to-grip objects for convenient toting. It also has a magnet on the top of the handle for attaching tools and other metal objects.
For technical drawings and 3-D models, click on a part number.
Strap | Material | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Handle Lg. | Capacity, lbs. | Handle | Strap | Color | Strap Color | Closure Type | Each | |
| 19" | 1" | 6" | 30 | Polypropylene Plastic | Nylon Fabric | Green | Black | Hook and Loop | 000000 | 000000 |
Unthreaded-Hole Spoked Hand Wheels
Tap custom threads or drill a hole in the side of the hub to secure with a set screw. The spoked design allows a better grip around the rim than solid hand wheels to manually adjust valves, presses, and machine components. All are dished, which keeps hands away from machinery.
Hand wheels with a revolving handle have a handle that spins freely, so wheels are easy to turn.
Hand wheels with a revolving/folding handle have a free-spinning handle that makes these wheels easy to turn and folds down, so it's out of the way when not in use.
Plastic hand wheels are a lightweight alternative to metal. They resist oil, grease, and solvents.
For technical drawings and 3-D models, click on a part number.
Wheel | Hub | Hole | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Number of Spokes | Dia. | Projection | Dia. | Projection | Dia. | Dp. | Handle Lg. | Set Screw Included | Temp. Range, °F | Each | |
Black Polypropylene Plastic | |||||||||||
| 2 | 3 5/32" | 1 3/8" | 29/32" | 3/4" | 5/16" | 21/32" | 1 9/16" | No | 32° to 176° | 0000000 | 000000 |
| 2 | 3 29/32" | 1 15/32" | 31/32" | 3/4" | 3/8" | 21/32" | 2 3/16" | No | 32° to 176° | 0000000 | 00000 |
| 2 | 4 7/8" | 1 23/32" | 1 7/32" | 31/32" | 3/8" | 7/8" | 2 9/16" | No | 32° to 176° | 0000000 | 00000 |
| 2 | 6 5/16" | 2" | 1 9/16" | 1 1/8" | 1/2" | 1 1/16" | 2 9/16" | No | 32° to 176° | 0000000 | 00000 |
| 2 | 7 7/8" | 2 13/32" | 1 31/32" | 1 13/32" | 5/8" | 1 11/32" | 3 5/32" | No | 32° to 176° | 0000000 | 00000 |
| 2 | 9 27/32" | 2 3/4" | 2 5/16" | 1 9/16" | 5/8" | 1 1/2" | 3 17/32" | No | 32° to 176° | 0000000 | 00000 |
Wheel | Hub | Hole | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Number of Spokes | Dia. | Projection | Dia. | Projection | Dia. | Dp. | Handle Lg. | Set Screw Included | Temp. Range, °F | Each | |
Black Polypropylene Plastic | |||||||||||
| 2 | 3 5/32" | 1 3/8" | 29/32" | 3/4" | 5/16" | 21/32" | 1 31/32" | No | 32° to 176° | 0000000 | 000000 |
| 2 | 3 29/32" | 1 15/32" | 31/32" | 3/4" | 3/8" | 21/32" | 2 3/16" | No | 32° to 176° | 0000000 | 00000 |
| 2 | 4 7/8" | 1 23/32" | 1 7/32" | 31/32" | 3/8" | 7/8" | 2 9/16" | No | 32° to 176° | 0000000 | 00000 |
| 2 | 6 5/16" | 2" | 1 9/16" | 1 1/8" | 1/2" | 1 1/16" | 2 9/16" | No | 32° to 176° | 0000000 | 00000 |
| 2 | 7 7/8" | 2 13/32" | 1 31/32" | 1 13/32" | 5/8" | 1 11/32" | 3 5/32" | No | 32° to 176° | 0000000 | 00000 |
| 2 | 9 27/32" | 2 3/4" | 2 5/16" | 1 9/16" | 5/8" | 1 1/2" | 3 17/32" | No | 32° to 176° | 0000000 | 000000 |
Shock-Absorbing Threaded Handles
A plastic tip absorbs shock to prolong the life of these handles and reduce stress on your arms.
Handle | Each | |||||||
|---|---|---|---|---|---|---|---|---|
| Material | Color | Lg. | Dia. | Handle Tip Material | Handle Tip Color | 1-11 | 12-Up | |
| Fiberglass | White | 60" | 1" | Plastic | White | 0000000 | 000000 | 000000 |
Tapered Handles
Telescoping fiberglass handles are hygienic.
Handle | Adapter | ||||||
|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Color | Material | Color | Inner Tube Material | Each | |
| 2-4 ft. | 1 1/16" | Yellow | Plastic | Black | Aluminum | 00000000 | 000000 |
| 4-8 ft. | 1 1/16" | Yellow | Plastic | Black | Aluminum | 00000000 | 00000 |
| 6-12 ft. | 1 1/16" | Yellow | Plastic | Black | Aluminum | 00000000 | 00000 |
| 6-18 ft. | 1 1/4" | Yellow | Plastic | Black | Aluminum | 00000000 | 00000 |
| 8-15 ft. | 1 1/16" | Yellow | Plastic | Black | Aluminum | 00000000 | 00000 |
| 8-22 ft. | 1 1/4" | Yellow | Plastic | Black | Aluminum | 00000000 | 00000 |
Wet-Mop Handles
Swing-Away Bar—Loosen the nut, swing the bar away, insert the mop head, swing the bar back into place, and retighten the nut.
Adjustable Bar—Loosen the nut, slide the center bar up, insert mop head between the bar and the handle end, and retighten the nut.
Clamp Jaw—Plastic jaws clamp down on wide headbands for a secure hold. Turn the adjustment sleeve to loosen the jaws, insert the mop's headband between the jaws, and retighten the sleeve.
Fiberglass handles are hygienic.
Nonsparking Wet-Mop Handles
Made of aluminum-bronze with a fiberglass handle, these handles inhibit sparking. Handle is also hygienic. Aluminum-bronze is Factory Mutual approved. Handles satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Nonsparking tools are not, however, classified as antistatic because they do conduct electricity.
Note: Do not use these tools in direct contact with acetylene due to the possible risk of explosion.
Handle | |||||||
|---|---|---|---|---|---|---|---|
| Material | Dia. | Color | Overall Lg. | Mop Head Attachment | Frame Wd. | Each | |
Adjustable Bar | |||||||
| Fiberglass | 1 1/8" | Yellow | 68" | Slip On | 6 1/2" | 0000000 | 0000000 |
Dust-Mop Handles
Fiberglass Hammer Handles
Durable and impact resistant, these handles won't split like wood can. Match the handle to the head opening size and shape of your tool. All have slip-resistant grips. To install, pour the included mixed epoxy into the tool head, place the handle in the opening, and let the epoxy cure. Epoxy fills in around the handle, compensating for different eye patterns and ensuring a secure fit.
Sledge handles are long enough for two-handed use.
Flat oval opening is often found on ball peen, riveting, tack, and chisel hammers.
Oval opening is often found on sledge hammers, steel hammers, and mauls.
Pear opening is often found on axes.
For Head Opening | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Hammer Head Wt. | Overall Lg. | Shape | Lg. | Wd. | Grip Style | Includes | Each | |
Epoxy Installation | ||||||||
Hammer Handle—Fiberglass | ||||||||
| 13 oz.-24 oz. | 14" | Flat Oval | 1"-1 1/16" | 17/32"-19/32" | Textured | Epoxy Bonding Compound | 0000000 | 000000 |
| 3 lbs.-4 lbs. | 14" | Flat Oval | 31/32"-1 1/16" | 19/32"-23/32" | Ribbed | Epoxy Bonding Compound, Mixing Stick, Tape Seal | 000000 | 00000 |
Sledge Handle—Fiberglass | ||||||||
| 6 lbs.-16 lbs. | 34" | Oval | 1 1/8"-1 5/16" | 29/32"-31/32" | Textured | Epoxy Bonding Compound | 0000000 | 00000 |
Ax Handle—Fiberglass | ||||||||
| 3 lbs.-5 lbs. | 34" | Pear | 2 5/16" | 3/4" | Plain | Epoxy Bonding Compound, Mixing Stick, Tape Seal | 00000000 | 00000 |
Extension Rods for Threaded-Shank Tube Brushes
Spiked Rollers for Self-Leveling Floor Coatings
Tiny spikes covering these rollers release trapped gas when rolled over thick self-leveling floor coatings to promote adhesion and aid in the self-leveling process.
18" long rollers come with a 5-foot extension handle that screws into the frame.
Applicators for Adhesive-Back Pipe Markers
Roll adhesive-back pipe markers onto overhead pipe, tube, duct, or conduit without taking a single step up a ladder. Stick one end of your marker onto the head so it doesn’t fall as you raise the extendable pole. Then use the foam roller to apply the marker to pipe smoothly and securely.
| Handle Lg., ft. | Roller Lg. | Head Material | Handle Material | Includes | Each | |
| 6-11 | 4" | Stainless Steel | Fiberglass | Adjustable Handle Roller Head | 0000000 | 0000000 |