How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Sleeves for Precision AN 37° Flared Fittings for Stainless Steel Tubing
- For Use With: Air, Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil, Water
- Temperature Range: -320° to 1200° F
- Tubing: Use with seamless 304 or 316 stainless steel
- Specifications Met: See Table
Use these sleeves with precision AN nuts and fittings to provide a tight metal-to-metal seal on stainless steel tubing that is flared to 37°. They are also known as ferrules.
304 stainless steel sleeves have very good corrosion resistance. 316 stainless steel sleeves have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| For Tube OD | Max. Pressure | Specifications Met | Each | |
304 Stainless Steel  | ||||
|---|---|---|---|---|
| 1/8" | 3,000 psi @ 72° F | AN819-2J, ASTM A380, MS20819, SAE AS4841, SAE AS5176 | 0000000 | 00000 |
| 1/4" | 3,000 psi @ 72° F | AN819-4J, ASTM A380, MS20819, SAE AS4841, SAE AS5176 | 0000000 | 0000 |
| 5/16" | 3,000 psi @ 72° F | AN819-5J, ASTM A380, MS20819, SAE AS4841, SAE AS5176 | 00000000 | 0000 |
| 3/8" | 3,000 psi @ 72° F | AN819-6J, ASTM A380, MS20819, SAE AS4841, SAE AS5176 | 0000000 | 0000 |
| 1/2" | 3,000 psi @ 72° F | AN819-8J, ASTM A380, MS20819, SAE AS4841, SAE AS5176 | 0000000 | 0000 |
| 5/8" | 3,000 psi @ 72° F | AN819-10J, ASTM A380, MS20819, SAE AS4841, SAE AS5176 | 00000000 | 0000 |
| 3/4" | 3,000 psi @ 72° F | AN819-12J, ASTM A380, MS20819, SAE AS4841, SAE AS5176 | 0000000 | 00000 |
| 1" | 3,000 psi @ 72° F | AN819-16J, ASTM A380, MS20819, SAE AS4841, SAE AS5176 | 00000000 | 00000 |
| 1 1/4" | 1,500 psi @ 72° F | AN819-20J, ASTM A380, MS20819, SAE AS4841, SAE AS5176 | 00000000 | 00000 |
| 1 1/2" | 1,500 psi @ 72° F | AN819-24J, ASTM A380, MS20819, SAE AS4841, SAE AS5176 | 00000000 | 00000 |
| 2" | 1,500 psi @ 72° F | AN819-32J, ASTM A380, MS20819, SAE AS4841, SAE AS5176 | 00000000 | 00000 |
316 Stainless Steel | ||||
| 1/8" | 3,000 psi @ 72° F | AN819-2K, ASTM A380, MS20819, SAE AS4841, SAE AS5176 | 00000000 | 0000 |
| 1/4" | 3,000 psi @ 72° F | AN819-4K, ASTM A380, MS20819, SAE AS4841, SAE AS5176 | 00000000 | 0000 |
| 5/16" | 3,000 psi @ 72° F | AN819-5K, ASTM A380, MS20819, SAE AS4841, SAE AS5176 | 00000000 | 0000 |
| 3/8" | 3,000 psi @ 72° F | AN819-6K, ASTM A380, MS20819, SAE AS4841, SAE AS5176 | 00000000 | 00000 |
| 1/2" | 3,000 psi @ 72° F | AN819-8K, ASTM A380, MS20819, SAE AS4841, SAE AS5176 | 00000000 | 00000 |
| 5/8" | 3,000 psi @ 72° F | AN819-10K, ASTM A380, MS20819, SAE AS4841, SAE AS5176 | 00000000 | 00000 |
| 3/4" | 3,000 psi @ 72° F | AN819-12K, ASTM A380, MS20819, SAE AS4841, SAE AS5176 | 00000000 | 00000 |
| 1" | 3,000 psi @ 72° F | AN819-16K, ASTM A380, MS20819, SAE AS4841, SAE AS5176 | 00000000 | 00000 |
| 1 1/4" | 1,500 psi @ 72° F | AN819-20K, ASTM A380, MS20819, SAE AS4841, SAE AS5176 | 00000000 | 00000 |
| 1 1/2" | 1,500 psi @ 72° F | AN819-24K, ASTM A380, MS20819, SAE AS4841, SAE AS5176 | 00000000 | 00000 |
| 2" | 1,500 psi @ 72° F | AN819-32K, ASTM A380, MS20819, SAE AS4841, SAE AS5176 | 00000000 | 00000 |
Ultra-High-Vacuum Flanges and Fittings for Stainless Steel Tubing
- For Use With: Air
- Temperature Range:
Flanges: -300° to 800° F
Gaskets: Not Rated - Tubing: Use with 304/304L and 316/316L stainless steel
- Specifications Met:
Flanges: ASTM A240, ASTM E45, ASTM E12
Gaskets: ASTM B152-179, ASTM F68
Create access points in ultra-high-vacuum lines or chambers by bolting two same-size flanges together with a copper gasket (sold separately) between them. The flanges’ sharp edges dig into the copper gasket and form an extremely tight seal, which means they handle higher vacuum pressures than other high-vacuum fittings with rubber gaskets. Also known as CF, Conflat, and UHV fittings, use them in vacuum coating, heat treating, and drying applications, as well as for leak testing and analyzing gases. They’re stainless steel so they resist rusting.
Fittings with a rotating flange turn so you can easily match up the bolt holes with another flange that may be misaligned.
Butt-weld flanges provide a flush connection for smooth flow through your line.
Bolt kits are required to make a complete connection.
For technical drawings and 3-D models, click on a part number.
Butt-Weld Tube Connection | Flanged Tube Connection | Bolt Hole | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Tube OD | Wall Thick. | For Tube OD | Flange OD | High-Vacuum Flange Size | High Vacuum Connection Type | Bolt Circle Dia. | Dia. | No. of | Bolts Included | No. of Bolt Kits Required | Lg. | Max. Vacuum | Material | Appearance | Each | |
Fixed | ||||||||||||||||
| 3/4" | 0.049" | 3/4" | 1 21/64" | 16 | CF | 1 1/16" | 11/64" | 6 | No | 1 | 1 1/2" | 1 × 10 -13 torr @72° F | 304 Stainless Steel | Polished | 0000000 | 000000 |
| 3/4" | 0.06" | 3/4" | 1 21/64" | 16 | CF | 1 1/16" | 11/64" | 6 | No | 1 | 9/16" | 1 × 10 -13 torr @72° F | 304 Stainless Steel | Polished | 0000000 | 00000 |
| 1 1/2" | 0.065" | 1 1/2" | 2 3/4" | 40 | CF | 2 5/16" | 17/64" | 6 | No | 1 | 2 15/32" | 1 × 10 -13 torr @72° F | 304 Stainless Steel | Polished | 0000000 | 00000 |
| 2 1/2" | 0.065" | 2 1/2" | 4 1/2" | 63 | CF | 3 5/8" | 21/64" | 8 | No | 1 | 3 3/8" | 1 × 10 -13 torr @72° F | 304 Stainless Steel | Polished | 0000000 | 000000 |
| 4" | 0.083" | 4" | 6" | 100 | CF | 5 1/8" | 21/64" | 16 | No | 4 | 4 5/16" | 1 × 10 -13 torr @72° F | 304 Stainless Steel | Polished | 0000000 | 000000 |
Rotating | ||||||||||||||||
| 3/4" | 0.06" | 3/4" | 1 21/64" | 16 | CF | 1 1/16" | 11/64" | 6 | No | 1 | 9/16" | 1 × 10 -13 torr @72° F | 304 Stainless Steel | Polished | 0000000 | 00000 |
| For Flange OD | For High-Vacuum Flange Size | Bolt Dia. | Thread Size | No. of Bolts Included | No. of Nuts Included | No. of Washers Included | Bolt Material | Each | |
| 1 21/64" | 16 | 0.164" | 8-32 | 6 | 6 | 12 | 18-8 Stainless Steel | 0000000 | 00000 |
| 2 3/4" | 40 | 1/4" | 1/4"-28 | 6 | 6 | 12 | 18-8 Stainless Steel | 0000000 | 00000 |
| 4 1/2" | 63 | 5/16" | 5/16"-24 | 8 | 8 | 16 | 18-8 Stainless Steel | 0000000 | 00000 |
| 6" | 100 | 5/16" | 5/16"-24 | 16 | 16 | 32 | 18-8 Stainless Steel | 0000000 | 00000 |
Front and Back Sleeves for Acid-Resistant Yor-Lok Fittings for Nickel Alloy Tubing
- For Use With: Air, Cutting Oil, Diesel Fuel, Fuel Oil, Gasoline, Hydraulic Fluid, Hydrofluoric Acid, Mineral Oil, Salt Water, Steam, Sulfuric Acid, Water
- Temperature Range: -325° to 900° F
- Tubing: Use with seamless soft 400 Nickel
- Specifications Met: ASTM B164
- Compatible With: Let-Lok, Parker A-Lok, Swagelok®
Use these 400 nickel Monel sleeves with Yor-Lok nuts and fittings to create a strong, leak-resistant seal. They have the corrosion resistance to handle hydrofluoric and sulfuric acid. They are also known as ferrules.
For technical drawings and 3-D models, click on a part number.