How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Sleeves for Compression Fittings for Stainless Steel Tubing
Use these sleeves with compression nuts and fittings to create a strong seal on stainless steel tubing. Sleeves are stainless steel for excellent corrosion resistance. They are also known as ferrules or rings.
ISO and DIN sleeves meet international dimensional standards.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Cutting Oil, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Natural Gas, Steam, Water
- Temperature Range: -75° to 750° F
- Tubing: Use with seamless 304 or 316/316L/316Ti stainless steel that meets DIN EN 10216-5 or DIN EN 10305-1
- Specifications Met: ISO 8434-1, DIN 2353
For Tube | |||||
|---|---|---|---|---|---|
| OD, mm | Sleeve Material | Max. Pressure | Each | ||
| 28 | 1.5-2 | 316 Stainless Steel | 3,600 psi @ 72° F | 0000000 | 00000 |
Nuts for Compression Fittings for Copper Tubing
Use these nuts with compression sleeves and fittings to create a strong seal on copper tubing. They are brass for good corrosion resistance.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil, Water
- Temperature Range: -65° to 250° F, except metric fittings are -40° to 200° F
- Tubing: Use with copper
- Specifications Met: UL listed, except for metric fittings
Nuts for Nickel-Plated Brass Compression Fittings for Copper Tubing
- For Use With: Air, Cutting Oil, Diesel Fuel, Ethyl Alcohol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Lubricants, Mineral Oil, Natural Gas, Steam, Water
- Temperature Range: -75° to 550° F
- Tubing: Use with copper
- Specifications Met: DIN 3870
Create a strong seal on copper tubing when you couple these nuts with compression sleeves and fittings. Made of nickel-plated brass, they resist corrosion better than plain brass. All meet DIN 3870, which is an international standard for tube fitting dimensions.
For technical drawings and 3-D models, click on a part number.
For Tube | ||||||
|---|---|---|---|---|---|---|
| OD, mm | Wall Thickness, mm | Nut Material | Maximum Pressure | Length, mm | Each | |
Short Nuts | ||||||
| 4 | 1 | Nickel-Plated Brass | 1,800 psi @ 72° F | 11 | 00000000 | 00000 |
Sleeves for Compression Fittings for Steel Tubing
- For Use With: Inch: Air, Hydraulic Fluid, Water
Metric: Hydraulic Fluid - Temperature Range: See table
- Tubing: Inch: Use with welded steel
Metric: Use with seamless steel - Specifications Met: Inch: SAE J514
Metric: ISO 8434, DIN 2353
Use these sleeves with compression nuts and fittings, sometimes called bite fittings, to create a strong seal on steel tubing. They are also known as ferrules.
Zinc-plated steel sleeves have fair corrosion resistance.
ISO 8434 (formerly DIN 2353) sleeves meet international standards for tube fitting pressures.
For technical drawings and 3-D models, click on a part number.
Sleeves for 37° Flared Fittings for Steel Tubing
- For Use With: Air, Fuel Oil, Hydraulic Fluid, Mineral Oil
- Temp. Range: -60° to 400° F
- Tubing: Use with seamless steel
- Specifications Met: SAE J514
Use these sleeves with a nut and fitting to provide a tight metal-to-metal seal on steel tubing that is flared to 37°. Sleeves are zinc-plated steel for fair corrosion resistance. They are also known as ferrules.
Inch × metric sleeve adapters convert the fitting from inch to metric.
For technical drawings and 3-D models, click on a part number.
For Tube OD | |||||
|---|---|---|---|---|---|
| Inch | Metric, mm | Sleeve Material | Max. Pressure | Each | |
Inch × Metric Sleeve Adapters | |||||
| 5/16" | 8 | Zinc-Plated Steel | 4,000 psi @ 72° F | 000000000 | 00000 |