Crimp-On Ferrules for Air and Water Hose
Use ferrules to create a permanent connection between your air- and water-hose and barbed hose fittings. You will need a hose crimper (sold separately) for installation.
Brass and aluminum ferrules have good corrosion resistance. Choose a ferrule with an ID no more than 0.025" larger than your hose OD (measured with the fitting installed); also make sure the ferrule is at least as long as the barbed end of your fitting.
304 stainless steel ferrules offer very good corrosion resistance. Choose a ferrule with an ID no more than 0.031" larger than the hose OD (measured with the fitting installed).
For technical drawings and 3-D models, click on a part number.
| Hose End ID | Lg. | Fitting End ID | Pkg. Qty. | Pkg. | |
Brass | |||||
|---|---|---|---|---|---|
| 0.275" | 0.5" | 0.217" | 50 | 0000000 | 000000 |
| 0.33" | 0.484" | 0.25" | 50 | 0000000 | 00000 |
| 0.358" | 0.5" | 0.266" | 50 | 0000000 | 00000 |
| 0.38" | 0.718" | 0.266" | 50 | 0000000 | 00000 |
| 0.41" | 0.5" | 0.266" | 50 | 0000000 | 00000 |
| 0.45" | 0.5" | 0.266" | 50 | 0000000 | 00000 |
| 0.478" | 0.688" | 0.328" | 50 | 0000000 | 00000 |
| 0.5" | 0.5" | 0.328" | 50 | 0000000 | 00000 |
| 0.5" | 1" | 0.344" | 25 | 0000000 | 00000 |
| 0.525" | 1" | 0.375" | 25 | 0000000 | 00000 |
| 0.548" | 0.484" | 0.375" | 50 | 0000000 | 00000 |
| 0.55" | 0.55" | 0.406" | 50 | 0000000 | 00000 |
| 0.562" | 1" | 0.438" | 25 | 0000000 | 00000 |
| 0.575" | 0.484" | 0.375" | 50 | 0000000 | 00000 |
| 0.593" | 1" | 0.438" | 25 | 0000000 | 00000 |
| 0.6" | 0.5" | 0.5" | 50 | 0000000 | 00000 |
| 0.625" | 0.55" | 0.453" | 25 | 0000000 | 00000 |
| 0.625" | 1" | 0.453" | 25 | 0000000 | 00000 |
| 0.65" | 0.5" | 0.5" | 50 | 0000000 | 00000 |
| 0.656" | 1" | 0.438" | 25 | 0000000 | 00000 |
| 0.675" | 0.516" | 0.5" | 25 | 0000000 | 00000 |
| 0.687" | 1" | 0.5" | 25 | 0000000 | 00000 |
| 0.7" | 0.516" | 0.5" | 50 | 0000000 | 00000 |
| 0.718" | 1" | 0.625" | 25 | 0000000 | 00000 |
| 0.725" | 0.531" | 0.5" | 50 | 0000000 | 00000 |
| 0.75" | 0.531" | 0.5" | 50 | 0000000 | 00000 |
| 0.75" | 1" | 0.625" | 25 | 0000000 | 00000 |
| 0.781" | 1" | 0.625" | 25 | 0000000 | 00000 |
| 0.8" | 0.844" | 0.688" | 25 | 0000000 | 00000 |
| 0.812" | 1" | 0.625" | 25 | 0000000 | 00000 |
| 0.825" | 0.844" | 0.688" | 25 | 0000000 | 00000 |
| 0.85" | 0.563" | 0.688" | 25 | 0000000 | 00000 |
| 0.875" | 0.844" | 0.688" | 25 | 0000000 | 00000 |
| 0.9" | 0.844" | 0.688" | 25 | 0000000 | 00000 |
| 0.925" | 0.81" | 0.688" | 25 | 0000000 | 00000 |
| 0.975" | 0.844" | 0.688" | 10 | 0000000 | 00000 |
| 1" | 0.844" | 0.687" | 25 | 0000000 | 00000 |
| 1.05" | 0.844" | 0.693" | 25 | 0000000 | 00000 |
| 1.1" | 0.844" | 0.812" | 25 | 0000000 | 00000 |
| 1.15" | 0.844" | 0.875" | 25 | 0000000 | 00000 |
| 1.375" | 0.875" | 1.125" | 10 | 0000000 | 00000 |
Aluminum  | |||||
| 0.375" | 0.718" | 0.266" | 50 | 0000000 | 00000 |
| 0.45" | 0.5" | 0.265" | 50 | 0000000 | 00000 |
| 0.5" | 0.5" | 0.328" | 50 | 0000000 | 00000 |
| 0.55" | 0.55" | 0.406" | 50 | 0000000 | 00000 |
| 0.625" | 0.55" | 0.453" | 50 | 0000000 | 00000 |
| 0.625" | 0.968" | 0.453" | 50 | 0000000 | 00000 |
| 0.675" | 0.5" | 0.5" | 50 | 0000000 | 00000 |
| 0.75" | 0.55" | 0.5" | 50 | 0000000 | 00000 |
304 Stainless Steel | |||||
| 0.478" | 0.687" | 0.328" | 5 | 0000000 | 0000 |
| 0.53" | 1" | 0.438" | 5 | 0000000 | 0000 |
| 0.56" | 1" | 0.437" | 5 | 0000000 | 0000 |
| 0.593" | 1" | 0.438" | 5 | 0000000 | 0000 |
| 0.625" | 1" | 0.437" | 5 | 0000000 | 0000 |
| 0.656" | 1" | 0.437" | 5 | 0000000 | 0000 |
| 0.69" | 1" | 0.5" | 5 | 0000000 | 0000 |
| 0.718" | 1" | 0.625" | 5 | 0000000 | 0000 |
| 0.75" | 1" | 0.625" | 5 | 0000000 | 0000 |
| 0.925" | 0.968" | 0.75" | 5 | 0000000 | 0000 |
| 1.175" | 0.844" | 0.875" | 5 | 0000000 | 0000 |
Hammer-Operated Crimpers
Use a hammer strike or a vise to crimp ferrules onto your hose and secure barbed hose fittings.
For technical drawings and 3-D models, click on a part number.
| For Use With | For Hose OD | Lg. | Wd. | Material | Number of Jaw Holes | Each | |
| Air Hose, Water Hose | 7/16", 9/16", 11/16" | 9 1/8" | 1" | Steel | 3 | 0000000 | 000000 |
Lever-Operated Crimpers with Dies
Crimpers are furnished with five removable dies that crimp air and water hose. Place your hose, ferrule, and barbed fitting into a die that's inserted in the crimper. Press the lever to crimp the fitting onto the hose. Fasteners not included. Hose OD compatibility is measured without the fittings installed.
Individual dies (sold separately) allow you to crimp sizes of air and water hose from 0.385" to 0.843" OD.
Lever-Operated Crimpers
Place your hose, ferrule, and barbed fitting into a die that's inserted in the crimper. Press the lever to crimp the fitting onto the hose. Use with aluminum or brass ferrules. Fasteners not included.
Individual dies (sold separately) allow you to crimp large sizes of air and water hose from 3/4" to 1 3/8" OD (measured without the fittings installed).
Mounting Holes | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Use With | For Hose OD | Lg. | Base Material | Handle Material | Number of | Dia. | Each | |
| Air Hose, Water Hose | 3/4" to 1 3/8" | 12" | Iron | Zinc-Plated Steel | 2 | 1/8" | 000000 | 0000000 |
| Dies for 0.906" Hose OD | 0000000 | Each | 000000 |
| Dies for 0.813" Hose OD | 0000000 | Each | 00000 |
| Dies for 3/4" Hose OD | 0000000 | Each | 00000 |
| Dies for 1" Hose OD | 0000000 | Each | 00000 |
| Dies for 1 3/8" Hose OD | 0000000 | Each | 00000 |
| Dies for 7/8" Hose OD | 0000000 | Each | 00000 |
| Dies for 0.969" Hose OD | 0000000 | Each | 00000 |
| Dies for 0.938" Hose OD | 0000000 | Each | 00000 |
| Dies for 0.781" Hose OD | 0000000 | Each | 00000 |
| Dies for 1 1/8" Hose OD | 0000000 | Each | 00000 |
Hose-Crimping Pliers
As you squeeze the handles, the vise-like jaws lock tightly onto the ferrule to secure barbed fittings onto your hose. To select the correct pliers, measure the hose OD and select the next larger size "For Hose OD" below.
For technical drawings and 3-D models, click on a part number.