About Exhaust Fans
More
About Sound Levels
Measured in decibels (dB), volume ratings indicate how much noise equipment makes. Some common volume levels include a whisper @ 20 dB, a refrigerator @ 40 dB, a conversation @ 60 dB, and a light machine shop @ 90 dB. OSHA recommends hearing protection for exposure to 80 dB and greater.
Wall-Mount Jet-Stream Fans
Often used to cool warehouse aisles and production lines, these fans generate a stream of air that travels farther than air from conventional fans. They have a direct-drive motor, which has fewer moving parts than belt-drive motors for less maintenance. They also have a totally enclosed motor enclosure, which can be used in dirty, dusty, and damp environments.
For technical drawings and 3-D models, click on a part number.
Overall | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Dia. | Airflow, cfm | Volume | Motor Speed, rpm | No. of Speeds | Power, hp | Current, A | Ht. | Wd. | Dp. | Cord Lg., ft. | Housing Material | Blade Material | Guard Material | Mounting Fasteners Included | Each | |
120V AC, Single Phase—Three-Prong Plug | ||||||||||||||||
Non-Oscillating | ||||||||||||||||
| 10" | 1,500 | 56 dBA @ 15 ft. | 1,600 | 2 | 1/8 | 0.8 | 16" | 16" | 13" | 12 | Polypropylene Plastic | Nylon Plastic | Polypropylene Plastic | Yes | 0000000 | 0000000 |
Dust-Resistant Direct-Drive Wall-Mount Exhaust Fans
Better suited for dirty, dusty, and damp environments than standard direct-drive fans, these have a totally enclosed motor enclosure. Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. Use these fans to draw stagnant and humid air out of a room or area.
Collars and louvers are sold separately. Use a collar to connect a wall-mount exhaust fan to a louver.
For technical drawings and 3-D models, click on a part number.
Overall | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Dia. | Airflow, cfm | Volume | Motor Speed, rpm | No. of Speeds | Power, hp | Ht. | Wd. | Dp. | Wt., lbs. | Max. Ambient Temperature | Frame Material | Blade Material | Specifications Met | Each | ||
120V AC, Single Phase—Hardwire | ||||||||||||||||
| 1 | 10" | 1,000 | Not Rated | 2,650 | 1 | 1/4 | 14 5/8" | 14 5/8" | 3 1/4" | 12 | Not Rated | Steel | Steel | UL Recognized Component | 000000 | 0000000 |
| 3 | 10" | 600 | 42 dBA @ 15 ft. | 1,550 | 1 | 1/40 | 13" | 13" | 6 5/8" | 14 | 104° F | Steel | Aluminum | __ | 0000000 | 000000 |
Direct-Drive Wall-Mount Exhaust Fans
Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. Use these fans to draw stagnant and humid air out of a room or area.
Fans with an open dripproof motor enclosure are for relatively clean, dry, indoor locations. Use a collar (sold separately) to connect these fans to a louver.
For technical drawings and 3-D models, click on a part number.
Light Duty Direct-Drive Wall-Mount Exhaust Fans with Louvers
These light duty fans are designed for use without duct. They come complete with a movable-blade louver. The louvers are gravity operated so they open only when air flows through them, which prevents backdrafts. Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. Use these fans to draw stagnant and humid air out of a room or area. All have a totally enclosed motor enclosure, which can be used in dirty, dusty, and damp environments.
For technical drawings and 3-D models, click on a part number.
For Opening | Overall | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Dia. | Airflow, cfm | Motor Speed, rpm | No. of Speeds | Power, hp | Ht. | Wd. | Ht. | Wd. | Dp. | Max. Ambient Temperature | Control Type | Frame Material | Blade Material | Mount. Fasteners Included | Mount. Hole Dia. | Specifications Met | Each | |
120V AC, Single Phase—Hardwire | ||||||||||||||||||
| 10" | 680 | 1,560 | 3 | 1/12 | 10 1/2" | 10 1/2" | 13" | 13" | 8 1/8" | 100° F | Pull Switch | Steel | Aluminum | No | 5/16" | UL Recognized Component | 00000000 | 0000000 |
120V AC, Single Phase—Three-Prong Plug | ||||||||||||||||||
| 10" | 680 | 1,560 | 3 | 1/12 | 10 1/2" | 10 1/2" | 13" | 13" | 8 1/8" | 100° F | Pull Switch | Steel | Aluminum | No | 5/16" | UL Recognized Component | 00000000 | 000000 |
Direct-Drive Wall-Mount Exhaust Fans with Louvers
These fans come complete with a movable-blade louver. The louvers are gravity operated so they open only when air flows through them, which prevents backdrafts. Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. Use these fans to draw stagnant and humid air out of a room or area. All have an open dripproof motor enclosure for relatively clean, dry, indoor locations. They also have a wire mesh inlet guard to protect the fan from debris.
For technical drawings and 3-D models, click on a part number.
For Opening | Overall | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Dia. | Airflow, cfm | Volume | Motor Speed, rpm | No. of Speeds | Power, hp | Ht. | Wd. | Ht. | Wd. | Dp. | Housing Material | Frame Material | Blade Material | Specifications Met | Each | |
120V AC, Single Phase—Hardwire | ||||||||||||||||
| 10" | 870 | 56 dBA @ 5 ft. | 1,550 | 1 | 1/20 | 17 1/4" | 17 1/4" | 19 1/2" | 19 1/2" | 20 3/4" | Steel | Galvanized Steel | Aluminum | C-UL Listed, UL Listed | 00000000 | 000000000 |
| For Airflow, cfm | Motor Speed, rpm | Power, hp | Each | |
120V AC, Single Phase | ||||
|---|---|---|---|---|
| 870 | 1,550 | 1/20 | 00000000 | 0000000 |
Exterior-Wall-Mount Exhaust Fans
Good when you don't have room to mount an exhaust fan inside your facility, these fans attach to openings in outside walls. Use them to draw stagnant and humid air out of a room or area.
Direct-drive fans have fewer moving parts than belt-drive fans, so they’re easier to maintain.
Fans with an open dripproof motor enclosure should be used in clean, dry, and indoor locations. You can use these fans with or without duct. To use them with duct, you'll need an angle ring (not included).
Note: Airflow depends on the resistance created by louvers, filters, and ductwork in your system. This resistance, known as static pressure (SP), is measured in inches of water.
Grilles (sold separately) have fixed blades.
Louvers (sold separately) are gravity operated. The blades open when air flows and close when it stops, preventing backdrafts.
For technical drawings and 3-D models, click on a part number.
Fans | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Opening | Overall | Grilles | Louvers | |||||||||||||
| Blade Dia. | Airflow @ Static Pressure | Drive Type | Motor Speed, rpm | Power, hp | Dia. | Ht. | Wd. | Dia. | Dp. | Motor Enclosure Type | Each | Each | Each | |||
120V AC, Single Phase—Hardwire | ||||||||||||||||
| 10" | 250 cfm @ 1/4 in. of H₂O 550 cfm @ 0 in. of H₂O | Direct | 1,050 | 1/25 | 10" | 10" | 10" | 21 1/8" | 16" | Open Dripproof | 000000 | 0000000 | 0000000 | 000000 | 0000000 | 000000 |
Direct-Drive Downdraft Roof-Mount Exhaust Fans
Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. More economical than upblast roof-mount exhaust fans, these draw stagnant and humid air out through your roof and then direct it back toward the roof. All fans have a disconnect switch to turn off the power for servicing.
Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
For technical drawings and 3-D models, click on a part number.
Fans | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Mounting Bases | |||||||||||||||
| Blade Dia. | Airflow @ Static Pressure | Volume | Motor Speed, rpm | Power, hp | Dia. | Ht. | Base Wd. | Wt., lbs. | Max. Ambient Temp., °F | Housing Material | Specifications Met | Each | Each | |||
Totally Enclosed Motor Enclosure | ||||||||||||||||
120V AC, Single Phase—Hardwire | ||||||||||||||||
| 1 | 10" | 60 cfm @ 1/2 in. of H₂O 500 cfm @ 0 in. of H₂O | Not Rated | 1,500 | 1/30 | 18 5/16" | 11 1/4" | 19" | 21 | Not Rated | Aluminum | AMCA Certified, ETL Listed | 0000000 | 0000000 | 0000000 | 0000000 |
Fan Blades
Replace worn and damaged fan blades. Use the included set screw or shaft collar to fasten a blade to your fan's shaft. Fan blades with a keyway are for use on motors with a keyed shaft. For difficult-to-remove hubs and fan blades, use fan blade pullers (not included).
Styles A-C blades are for use in low-airflow applications.
For technical drawings and 3-D models, click on a part number.
Blade | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Dia. | Number of | Pitch | Rotation | For Maximum Motor Speed, rpm | Airflow @ Max. Motor Speed, cfm | Power @ Max. Motor Speed, hp | Hub Material | Includes | Each | |
Aluminum | |||||||||||
For Round Shaft with 1/4" Diameter | |||||||||||
| A | 10" | 5 | 21° | Clockwise | 1,725 | 820 | 0.06 | Aluminum | Set Screw | 00000000 | 000000 |
For Round Shaft with 5/16" Diameter | |||||||||||
| B | 10" | 3 | 27° | Clockwise | 1,800 | 740 | 0.03 | Steel | Shaft Collar | 00000000 | 00000 |
| B | 10" | 4 | 23° | Clockwise | 1,800 | 650 | 0.03 | Steel | Shaft Collar | 00000000 | 00000 |
For Round Shaft with 1/2" Diameter | |||||||||||
| B | 10" | 3 | 27° | Clockwise | 1,800 | 740 | 0.03 | Steel | Shaft Collar | 00000000 | 00000 |
| B | 10" | 4 | 23° | Clockwise | 1,800 | 650 | 0.03 | Steel | Shaft Collar | 00000000 | 00000 |
For Keyed Shaft with 5/8" Diameter | |||||||||||
| B | 10" | 4 | 23° | Clockwise | 1,800 | 650 | 0.03 | Steel | Shaft Collar | 00000000 | 00000 |
| C | 10" | 3 | 27° | Clockwise | 1,800 | 740 | 0.03 | Steel | Shaft Collar | 00000000 | 00000 |