Bolt-On Fall-Arrest Anchor Points
![](/prerenderstable/mvPRE/contents/gfx/imagecache/110/11005t11p1-i01b-digital@halfx_637087112960719014.png?ver=imagenotfound)
Mounting Holes | |||||||
---|---|---|---|---|---|---|---|
Capacity, lbs. | Material | Connection Type | Dia. | No. of | Fasteners Included | Each | |
Bolt On | |||||||
310 | Steel | D-Ring | 9/16" | 2 | No | 00000000 | 000000 |
Stationary I-Beam Fall-Arrest Anchor Points
![](/prerenderstable/mvPRE/contents/gfx/imagecache/110/11005t23-@halfx_637762755409383080.png?ver=imagenotfound)
Mount this anchor to vertical and horizontal I-beams.
For I-Beam Flange | ||||||
---|---|---|---|---|---|---|
Wd. | Thick. | Capacity, lbs. | Material | Connection Type | Each | |
Clamp On | ||||||
4" to 14" | 1 1/2" | 310 | Stainless Steel | D-Ring | 00000000 | 0000000 |
Webbing Boom Strap Fall-Arrest Anchor Points
![](/prerenderstable/mvPRE/contents/gfx/imagecache/110/11005t14p1-i01b-digital@halfx_637087131344424722.png?ver=imagenotfound)
Attach to the arm of a bucket truck. The strap has a cinching buckle for a snug, nonslip fit.
For Max. Dia. | Capacity, lbs. | Material | Construction | Connection Type | Features | Each | |
42" | 350 | Polyester | Webbing | D-Ring | Cinching Buckle | 00000000 | 000000 |
Push-In Fall-Arrest Anchor Points for Concrete
![](/prerenderstable/mvPRE/contents/gfx/imagecache/110/11005t29-@halfx_637915913182455939.png?ver=imagenotfound)
Wedge this anchor into a drilled mounting hole—it's good for vertical and horizontal concrete applications.
For Mounting Hole Dia. | Capacity, lbs. | Material | Connection Type | Each | |
Push In | |||||
---|---|---|---|---|---|
5/8" | 400 | Steel | D-Ring | 00000000 | 000000 |
Nail-On Fall-Arrest Anchor Points for Roofs
![](/prerenderstable/mvPRE/contents/gfx/imagecache/110/11005t17p1-i01b-digital@halfx_637087120793807153.png?ver=imagenotfound)
Capacity, lbs. | Material | Connection Type | Fasteners Included | Each | |
Nail On | |||||
---|---|---|---|---|---|
310 | Steel | D-Ring | No | 00000000 | 000000 |
Quick-Stop Fall-Arrest Lanyards
![](/prerenderstable/mvPRE/contents/gfx/imagecache/809/8091t33-@halfx_1708436531.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/809/8091t33-@halfx_1708436958.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/809/8091t82-@halfx_1708436959.png?ver=imagenotfound)
A quick-stop lanyard must be used when you have less than 18 1/2 ft. of fall clearance as it will stop your fall within a few inches. Use in conjunction with a harness and an anchor for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Dual-leg lanyard attaches to two anchors at once.
Harness End Connection | Anchor End Connection | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg., ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Housing Material | Specifications Met | Each | |
Single Leg | ||||||||||||
6 | 310 | Polyester | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4" | Plastic | ANSI Z359.14 | 0000000 | 0000000 |
9 | 310 | Polyester | Webbing | Shackle | Stainless Steel | Snap Hook | Steel | 3/4" | Plastic | ANSI Z359.14 | 0000000 | 000000 |
11 | 310 | Polyester | Webbing | Shackle | Stainless Steel | Snap Hook | Steel | 3/4" | Plastic | ANSI Z359.14 | 0000000 | 000000 |
20 | 420 | Nylon | Webbing | Swivel Eye | Steel | Snap Hook | Steel | 3/4" | Plastic | ANSI Z359.14 | 0000000 | 000000 |
25 | 310 | Stainless Steel | Wire Rope | Carabiner | Stainless Steel | Snap Hook | Steel | 3/4" | Plastic | ANSI Z359.14 | 0000000 | 000000 |
50 | 420 | Stainless Steel | Wire Rope | Swivel Eye | Stainless Steel | Snap Hook | Stainless Steel | 3/4" | Aluminum, Stainless Steel | ANSI Z359.14 | 0000000 | 00000000 |
Dual Leg | ||||||||||||
6 | 310 | Polyester | Webbing | Pin Retainer | Aluminum | Snap Hook/Snap Hook | Steel | 3/4" | Plastic | ANSI Z359.14 | 0000000 | 000000 |
Quick-Stop Fall-Arrest Lanyards with Anchor Point
![](/prerenderstable/mvPRE/contents/gfx/imagecache/809/8091t74c1-i01b-master1573135690@halfx_637087112663576445.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/809/8091t83-31708436487@halfx_1708436532.png?ver=imagenotfound)
These lanyards form their own anchor point by attaching directly to a rated structure. A quick-stop lanyard must be used when you have less than 18 1/2 ft. of fall clearance. Use in conjunction with a harness for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Hook-over lanyard has a large snap hook that attaches directly to a rated structure such as a scaffold or pipe to create an anchor point.
Wraparound lanyard loops around a rated structure such as an I-beam and then attaches to itself to create an anchor point.
Harness End Connection | Anchor End Connection | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg., ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Housing Material | Specifications Met | Each | |
Hook Over Single Leg | ||||||||||||
6 | 310 | Polyester | Webbing | Carabiner | Steel | Snap Hook | Steel | 2 1/2" | Plastic | ANSI Z359.14 | 0000000 | 0000000 |
Wraparound Single Leg | ||||||||||||
7 1/2 | 310 | Polyester | Webbing | Pin Retainer | Aluminum | Snap Hook | Steel | 3/4" | Plastic | ANSI Z359.14 | 0000000 | 000000 |
Shock-Absorbing Fall-Arrest Lanyards
![]() | ![]() Single Leg | ![]() Dual Leg |
![]() |
For adequate fall clearance, you must have at least 18 1/2 ft. of clearance. Use in conjunction with a harness and an anchor for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Dual-leg lanyards attach to two anchors at once.
Harness End Connection | Anchor End Connection | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg., ft. | Lg. After Fall, ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Specifications Met | Each | |
Single Leg | ||||||||||||
6 | 9 1/2 | 310 | Nylon | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4" | ANSI Z359.1 | 0000000 | 000000 |
Dual Leg | ||||||||||||
6 | 9 1/2 | 310 | Nylon | Webbing | Snap Hook | Steel | Snap Hook/Snap Hook | Steel | 3/4" | ANSI Z359.1 | 0000000 | 000000 |
6 | 9 1/2 | 420 | Polyester | Webbing | Snap Hook | Steel | Snap Hook/Snap Hook | Steel | 3/4" | __ | 000000 | 000000 |
Twist-Locking Carabiners—Not for Lifting
![](/prerenderstable/mvPRE/contents/gfx/imagecache/337/3370t21-@halfx_1683927247.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/337/3370t22-@halfx_1683927227.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/337/3370t23-@halfx_1683927268.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/329/3293t32-@halfx_637078909612005360.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/397/3974n11-@halfx_1683927271.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/809/8091t24-@halfx_1683927294.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/809/8091t22-@halfx_1683927288.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/329/3293t18-@halfx_1683927310.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/329/3293t27-@halfx_1683927223.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/i16/i167-3216t11--777de36adc51610632260-p9@halfx_637462074776160388.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/321/3216t11-twist-tilt@halfx_1687961189.png?ver=imagenotfound)
Latch
Position
![](/prerenderstable/mvPRE/contents/gfx/imagecache/321/3216t11-twist-straight@halfx_1687961189.png?ver=imagenotfound)
Latch
Position
Hold rope more securely than nonlocking and slide-release carabiners. While these carabiners are not as secure as screw-locking carabiners, they are easier to open.
Pull down/twist 90°/push in and lift up/twist 90°/push in carabiners are more secure than twist 90°/push in because they require an extra step to open.
Zinc-plated steel carabiners are mildly corrosion resistant. Aluminum carabiners are more lightweight and resist corrosion better than zinc-plated steel. Anodized carabiners offer excellent corrosion resistance. Stainless steel carabiners have excellent resistance to salt water and chemicals.
Styles 3 and 7-13 have either a removable eye pin or eyelet that secures rope to one end of the carabiner to prevent it from sliding or moving.
Carabiners with an offset latch open to the side, giving you more space to attach large items.
Carabiners with a locking indicator have a symbol that is shown when the carabiner is fully locked.
Carabiners that meet ANSI/ASSP Z359.12 have been tested for use in fall protection systems.
For technical drawings and 3-D models, click on a part number.
Style | Capacity, lbs. | Thick. | Opening Wd. | Inside Lg. | Narrow-End Inside Wd. | Open Latch Position | Locking Indicator | Color | Specifications Met | Each | |
Pull Down/Twist 90°/Push In | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
17-4 PH Stainless Steel | |||||||||||
3 | 8,900 | 7/16" | 15/16" | 3 1/2" | 1" | Offset | Yes | __ | ANSI/ASSP Z359.12, CE Marked | 0000000 | 000000 |
4 | 8,900 | 7/16" | 15/16" | 3 1/2" | 1 1/4" | Offset | Yes | __ | ANSI/ASSP Z359.12, CE Marked | 0000000 | 00000 |
5 | 11,200 | 7/16" | 1 3/16" | 4 1/16" | 1 3/4" | Offset | Yes | __ | ANSI/ASSP Z359.12, CE Marked | 0000000 | 00000 |
Lift Up/Twist 90°/Push In | |||||||||||
Zinc-Plated Steel | |||||||||||
6 | 5,000 | 7/16" | 13/16" | 3 1/4" | 1 1/4" | Straight | No | Gold | ANSI/ASSP Z359.12 | 0000000 | 00000 |
7 | 5,000 | 7/16" | 1" | 4" | 3/8" | Straight | No | Gold | ANSI/ASSP Z359.12 | 0000000 | 00000 |
8 | 5,000 | 9/16" | 2 1/4" | 7 1/2" | 1 13/16" | Straight | No | Gold | ANSI/ASSP Z359.12 | 0000000 | 00000 |
9 | 5,000 | 9/16" | 1 3/16" | 6 1/8" | 1" | Straight | No | Gold | ANSI/ASSP Z359.12 | 0000000 | 000000 |
Anodized Aluminum | |||||||||||
12 | 5,000 | 1/2" | 7/8" | 3 3/4" | 1" | Straight | No | __ | ANSI/ASSP Z359.12 | 0000000 | 00000 |
12 | 5,000 | 11/16" | 2" | 8" | 7/8" | Straight | No | __ | ANSI/ASSP Z359.12 | 0000000 | 00000 |
17 | 5,000 | 1/2" | 13/16" | 3 1/2" | 7/8" | Straight | No | __ | ANSI/ASSP Z359.12 | 0000000 | 00000 |
420 Stainless Steel | |||||||||||
6 | 5,000 | 7/16" | 7/8" | 3 7/16" | 1 1/8" | Straight | No | __ | ANSI/ASSP Z359.12 | 0000000 | 00000 |