Also known as screw eyes, use the sharp point of these eyebolts to mount directly into wood.

Use these eyebolts for routing wire and for other light duty applications.

Also known as machinery eyebolts.

Unlike conventional eyebolts, you can rotate the eye 360° to match the angle of your load.

Route wire and cable through the smooth eye without snagging.

Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back to compensate for roll and sway when lifting heavy or unbalanced loads.

For a more secure hold than standard hoist rings, weld these hoist rings to your load.

The ball bearing on these hoist rings makes it easy to rotate your load even after it’s suspended.

The fixed base provides added stability and allows you to lift heavy loads with smaller thread sizes.

You can use these versatile hangers in a threaded hole (as you would a screw), or secure them with a nut (as you would a bolt).

Drill holes with the point on these hangers.

These hangers have internal threads for use with threaded rods, bolts, and anchors.

With threads on one end, screw eyes can be easily screwed into wood. They are often used with wire to hang pictures.

Anchor these ringbolts where you need them, then remove the ring when not in use. Once installed, the mounting bolt stays in place. Insert the ring by threading into the mounting bolt; remove by unthreading it.