Stainless Steel Eyebolts

Filter by

Material

System of Measurement

Thread Size

Body Style

Eye Diameter

Shank Length

Threading

Eye Type

Thread Length

Overall Length

Movement

Application

Vertical Capacity

Finish

Eye Shape

Nut Type

Shank Thread Size

Length

Thread Pitch

Specifications Met

Weight Capacity

REACH Compliance

Thickness

Forward

How can we improve?

927 Products

About Rod Ends

Eyebolts—For Lifting

Also known as machinery eyebolts.

Eyebolts with Nuts—For Lifting

Also known as nut eyebolts, these are designed for through-hole applications.

Rotating Eyebolts—For Lifting

Unlike conventional eyebolts, you can rotate the eye 360° to match the angle of your load.

Eye Nuts—For Lifting

Create your own lifting eye by adding an eye nut to a stud or bolt.

Routing Eyebolts with Nuts—Not for Lifting

Also known as nut eyebolts, these are designed for through-hole applications.

Routing Eyebolts for Wood—Not for Lifting

Also known as screw eyes, use the sharp point of these eyebolts to mount directly into wood.

Unthreaded Routing Eyebolts—Not for Lifting

Also known as blank eyebolts, you can weld or thread these to suit your application.

Hoist Rings—For Lifting

Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back to compensate for roll and sway when lifting heavy or unbalanced loads.

Carabiners

Carabiners—Not for Lifting

Quickly connect and disconnect these carabiners—they don’t lock.

Twist-Locking Carabiners—Not for Lifting

Hold rope more securely than nonlocking and slide-release carabiners. While these carabiners are not as secure as screw-locking carabiners, they are easier to open.

Screw-Locking Carabiners—Not for Lifting

The most secure carabiner we offer, these carabiners won’t accidentally open when rope slides because you need to unscrew the latch to unlock them.

Slide-Release Carabiners—Not for Lifting

Slide the lock down to open the latch and release it to lock these carabiners.

Load Securing and Stabilizing

Rope Guides

Use these guides to position a rope.

Clamp-On Rope Guides

Clamp around a pipe or tube to guide rope.

Wraparound Rope Cleats

Wind rope around these cleats for a secure hold.

Webbing Guides

Also known as footman's loops, use these guides to prevent webbing from twisting, or as anchor points in tie-down applications.

Webbing Anchor Plates

Sew webbing onto these plates for a permanent anchor point or run webbing through to use them as guides.

Snap-In Load-Securing Plates

Use these plates where full lengths of track won't fit to create one anchor point.

Rod Ends and Linkages

Corrosion-Resistant Fully Threaded Rod End Bolts

These rod end bolts are good for wet and corrosive environments—for maximum mounting flexibility, cut the fully threaded shaft to whatever length you need.