About Rod Ends
More
Carabiners—Not for Lifting
Latch
Position
Quickly connect and disconnect these carabiners—they don’t lock.
Aluminum carabiners are more corrosion resistant and lightweight than zinc-plated carabiners. Anodized aluminum carabiners offer excellent corrosion resistance.
Twist-Locking Carabiners—Not for Lifting
Latch
Position
Latch
Position
Hold rope more securely than nonlocking and slide-release carabiners. While these carabiners are not as secure as screw-locking carabiners, they are easier to open.
Twist 90°/push in carabiners are easy to open with one hand.
Pull down/twist 90°/push in and lift up/twist 90°/push in carabiners are more secure than twist 90°/push in because they require an extra step to open. Some have an unlocked setting, making it easy to add your rope or strap. Lift up the latch then twist it. It will remain unlocked until you push in the latch. Once the latch is pushed in, it springs back and locks into place.
Aluminum carabiners are more lightweight and resist corrosion better than zinc-plated steel. Anodized carabiners offer excellent corrosion resistance.
Style 2 carabiners have a spring-loaded wire to keep rope secured to one end, preventing it from sliding or moving. Lift the wire to release the rope. When you let go, the wire springs back into place.
Styles 3 and 7-13 have either a removable eye pin or eyelet that secures rope to one end of the carabiner to prevent it from sliding or moving.
Carabiners with an offset latch open to the side, giving you more space to attach large items.
Carabiners with a locking indicator have a symbol that is shown when the carabiner is fully locked.
Carabiners that meet ANSI/ASSP Z359.12 have been tested for use in fall protection systems.
| Style | Capacity, lbs. | Thick. | Opening Wd. | Inside Lg. | Narrow-End Inside Wd. | Open Latch Position | Locking Indicator | Color | Specifications Met | Features | Each | |
Twist 90°/Push In | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Anodized Aluminum | ||||||||||||
| 1 | 6,500 | 5/16" | 1" | 3 1/2" | 1 1/4" | Offset | Yes | Red | __ | __ | 0000000 | 000000 |
Pull Down/Twist 90°/Push In | ||||||||||||
Anodized Aluminum | ||||||||||||
| 2 | 5,300 | 1/2" | 15/16" | 3 1/2" | 1 3/16" | Offset | Yes | Purple | CE Marked | __ | 0000000 | 00000 |
| 2 | 5,800 | 1/2" | 1" | 3 5/16" | 1" | Straight | Yes | Orange | CE Marked | __ | 0000000 | 00000 |
Lift Up/Twist 90°/Push In | ||||||||||||
Aluminum | ||||||||||||
| 6 | 2,200 | 1/2" | 1 1/16" | 3 1/2" | 1 1/16" | Straight | No | __ | __ | __ | 0000000 | 00000 |
| 10 | 1,600 | 7/16" | 13/16" | 4" | 11/16" | Straight | No | __ | __ | __ | 0000000 | 00000 |
Anodized Aluminum | ||||||||||||
| 5 | 5,800 | 1/2" | 1" | 3 5/16" | 1" | Offset | Yes | Orange | CE Marked | Unlocked Setting | 0000000 | 00000 |
| 5 | 6,500 | 1/2" | 1" | 3 1/2" | 1 1/4" | Offset | Yes | Red | CE Marked | Unlocked Setting | 0000000 | 00000 |
| 11 | 6,700 | 11/16" | 2" | 7 3/4" | 1" | Straight | No | Black | __ | __ | 0000000 | 00000 |
| 12 | 5,000 | 1/2" | 7/8" | 3 3/4" | 1" | Straight | No | __ | ANSI/ASSP Z359.12 | __ | 0000000 | 00000 |
| 12 | 5,000 | 11/16" | 2" | 8" | 7/8" | Straight | No | __ | ANSI/ASSP Z359.12 | __ | 0000000 | 00000 |
| 13 | 5,700 | 1/2" | 7/8" | 3 3/4" | 1 3/8" | Straight | No | Black | CE Marked | __ | 00000000 | 00000 |
| 13 | 5,700 | 1/2" | 7/8" | 3 3/4" | 1 3/8" | Straight | No | Gold | CE Marked | __ | 00000000 | 00000 |
| 14 | 5,700 | 1/2" | 7/8" | 3 3/4" | 1 3/8" | Straight | No | Black | CE Marked | __ | 00000000 | 00000 |
| 14 | 5,700 | 1/2" | 7/8" | 3 3/4" | 1 3/8" | Straight | No | Gold | CE Marked | __ | 00000000 | 00000 |
| 15 | 5,300 | 7/16" | 15/16" | 3 1/2" | 1 3/8" | Offset | Yes | Purple | CE Marked | Unlocked Setting | 0000000 | 00000 |
| 16 | 6,100 | 1/2" | 7/8" | 3 1/8" | 1" | Straight | No | Gold | CE Marked | __ | 0000000 | 00000 |
| 17 | 5,000 | 1/2" | 13/16" | 3 1/2" | 7/8" | Straight | No | __ | ANSI/ASSP Z359.12 | __ | 0000000 | 00000 |
Screw-Locking Carabiners—Not for Lifting
Latch
Position
Latch
Position
The most secure carabiner we offer, these carabiners won’t accidentally open when rope slides because you need to unscrew the latch to unlock them.
Aluminum carabiners are more lightweight and resist corrosion better than zinc-plated steel carabiners. Anodized aluminum carabiners have excellent corrosion resistance.
Style 5 carabiners have a spring-loaded wire to keep rope secured to one end. Lift the wire to release the rope. When you let go, the wire springs back into place.
Carabiners with an offset latch open to the side, giving you more space to attach large items.
Carabiners with a locking indicator have a symbol that is covered when the carabiner is fully locked and exposed when it is not.
| Capacity, lbs. | Thick. | Opening Wd. | Inside Lg. | Narrow-End Inside Wd. | Open Latch Position | Locking Indicator | Color | Each | ||
Aluminum | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 400 | 5/16" | 11/16" | 2 3/4" | 1/2" | Straight | No | __ | 0000000 | 000000 |
| 1 | 1,200 | 3/8" | 11/16" | 3 5/16" | 1/2" | Straight | No | __ | 0000000 | 00000 |
| 1 | 1,600 | 7/16" | 15/16" | 4 1/16" | 11/16" | Straight | No | __ | 0000000 | 00000 |
| 2 | 2,200 | 1/2" | 1 1/16" | 3 1/2" | 1 1/16" | Straight | No | __ | 0000000 | 00000 |
| 2 | 6,700 | 1/2" | 1" | 3 5/8" | 1 7/16" | Straight | No | __ | 0000000 | 00000 |
| 4 | 5,100 | 1/2" | 1 3/16" | 3 7/8" | 1" | Straight | No | __ | 0000000 | 00000 |
| 4 | 5,600 | 1/2" | 15/16" | 3 7/16" | 15/16" | Straight | No | __ | 0000000 | 00000 |
Anodized Aluminum | ||||||||||
| 2 | 6,500 | 1/2" | 1" | 3 1/2" | 1 5/16" | Offset | Yes | Red | 0000000 | 00000 |
| 3 | 5,300 | 7/16" | 1" | 3 1/2" | 1 1/2" | Offset | Yes | Black | 0000000 | 00000 |
| 4 | 5,800 | 1/2" | 1" | 3 5/16" | 1 3/16" | Offset | Yes | Orange | 0000000 | 00000 |
| 5 | 5,800 | 1/2" | 1" | 3 5/16" | 7/8" | Offset | Yes | Orange | 0000000 | 00000 |
Twist-Locking Carabiners with Swivel—Not for Lifting
Prevent twisting in your rope or line with these swiveling carabiners. To open, pull the latch down, twist 90° and push in. These carabiners have a symbol that is exposed when the carabiner is fully locked and covered when it is unlocked. Made of anodized aluminum, they resist corrosion and are lightweight.
Carabiners with ball bearings rotate freely under loads.
Carabiners without ball bearings swivel with a bushing to rotate before a load is applied. There is a carabiner on both sides of the swivel, so you can attach multiple items in different orientations.
For technical drawings and 3-D models, click on a part number.
| Swivel Type | Capacity, lbs. | Thick. | Opening Wd. | Inside Lg. | Narrow-End Inside Wd. | Overall Lg. | Eye ID | Open Latch Position | Locking Indicator | Color | Each | |
Pull Down/Twist 90°/Push In | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Anodized Aluminum | ||||||||||||
| With Ball Bearings | 6,700 | 7/16" | 13/16" | 2 15/16" | 3/16" | 5 3/8" | 1" | Straight | Yes | Black | 0000000 | 0000000 |
| Without Ball Bearings | 6,700 | 7/16" | 13/16" | 2 15/16" | 3/16" | 7 3/8" | __ | Straight | Yes | Black | 0000000 | 000000 |
Rope Guides
Use these guides to position a rope.
Aluminum guides are corrosion resistant.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Wraparound Rope Cleats
Wind rope around these cleats for a secure, temporary hold.
Bolt-on cleats have exposed fasteners that attach directly to the deck or other surface.
Weld-on cleats are made of weldable and sandcast aluminum that has better corrosion resistance and durability than standard aluminum. They’re good for permanent installations on aluminum surfaces.
Aluminum and brass cleats are often used in marine environments.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Pull-Through Rope Cleats
Two rotating cams pinch and hold rope as you pull it through to provide a temporary hold. Cleats have corrosion-resistant ball bearings.
Warning: Never use for lifting applications.
For technical drawings and 3-D models, click on a part number.
Rope Cleats | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting Holes | Optional Rope Guides | Optional Saddles | |||||||||||
| For Max. Rope Dia. | Lg. | Overall Ht. | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Lg. | For Mounting Screw Size | Each | Each | Each | |||
Aluminum | |||||||||||||
| 1/2" | 2 9/16" | 1 3/16" | No | 2 | 3/16" | 1 1/2" | No. 10 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 00000 |
| 5/8" | 3 3/8" | 1 7/16" | No | 2 | 1/4" | 2 1/16" | 1/4" | 0000000 | 00000 | 000000 | 00 | 0000000 | 0000 |
Horizontal Snap-In Load-Securing Track
Use this track, also known as E-Track, to lay the groundwork for a tie-down system. Snap in straps, anchor points, and other accessories to keep cargo from shifting inside vans, trucks, and trailers.
Aluminum track has excellent corrosion resistance and can easily be drilled through to mount.
For technical drawings and 3-D models, click on a part number.
| Lg., ft. | Wd. | Ctr.-to-Ctr. Slot Lg. | Mounting Fasteners Included | Each | |
Aluminum | |||||
|---|---|---|---|---|---|
| 10 | 5" | 2" | No | 00000000 | 000000 |
Lightweight Corrosion-Resistant Ball Joint Rod Ends
These anodized aluminum rod ends are lighter than stainless steel rod ends and have good corrosion resistance. A PTFE liner allows smooth ball rotation and eliminates the need for lubrication.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Choose a Shank Thread Direction | Each | |
| 10-32 | 3/16" | 13° | 5/8" | 5/16" | 1 1/4" | 3/4" | 1,350 | Anodized 7075 Aluminum | 00000000 | 000000 | |
| 1/4"-28 | 1/4" | 16° | 3/4" | 3/8" | 1 9/16" | 1" | 2,450 | Anodized 7075 Aluminum | 00000000 | 00000 | |
| 5/16"-24 | 5/16" | 14° | 7/8" | 7/16" | 1 7/8" | 1 1/4" | 2,850 | Anodized 7075 Aluminum | 00000000 | 00000 | |
| 3/8"-24 | 3/8" | 12° | 1" | 1/2" | 1 15/16" | 1 1/4" | 4,200 | Anodized 7075 Aluminum | 00000000 | 00000 | |
| 7/16"-20 | 7/16" | 14° | 1 1/8" | 9/16" | 2 1/8" | 1 3/8" | 4,500 | Anodized 7075 Aluminum | 00000000 | 00000 | |
| 1/2"-20 | 1/2" | 12° | 1 5/16" | 5/8" | 2 7/16" | 1 1/2" | 7,650 | Anodized 7075 Aluminum | 00000000 | 00000 | |
| 5/8"-18 | 5/8" | 16° | 1 1/2" | 3/4" | 2 5/8" | 1 5/8" | 8,500 | Anodized 7075 Aluminum | 00000000 | 00000 | |
| 3/4"-16 | 3/4" | 14° | 1 3/4" | 7/8" | 2 7/8" | 1 3/4" | 13,300 | Anodized 7075 Aluminum | 00000000 | 00000 |
Internally Threaded Lightweight Corrosion-Resistant Ball Joint Rod Ends
These anodized aluminum rod ends are lighter than stainless steel rod ends and have good corrosion resistance. A PTFE liner allows smooth ball rotation and eliminates the need for lubrication.
For technical drawings and 3-D models, click on a part number.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Material | Choose a Shank Thread Direction | Each | |
| 10-32 | 3/16" | 13° | 5/8" | 5/16" | 1 1/16" | 1/2" | 1,350 | Anodized 7075 Aluminum | 00000000 | 000000 | |
| 1/4"-28 | 1/4" | 16° | 3/4" | 3/8" | 1 5/16" | 11/16" | 2,550 | Anodized 7075 Aluminum | 00000000 | 00000 | |
| 5/16"-24 | 5/16" | 14° | 7/8" | 7/16" | 1 3/8" | 11/16" | 2,850 | Anodized 7075 Aluminum | 00000000 | 00000 | |
| 3/8"-24 | 3/8" | 12° | 1" | 1/2" | 1 5/8" | 13/16" | 3,950 | Anodized 7075 Aluminum | 00000000 | 00000 | |
| 7/16"-20 | 7/16" | 14° | 1 1/8" | 9/16" | 1 13/16" | 15/16" | 4,500 | Anodized 7075 Aluminum | Right Hand | 000000000 | 00000 |
| 1/2"-20 | 1/2" | 12° | 1 5/16" | 5/8" | 2 1/8" | 1 1/16" | 7,000 | Anodized 7075 Aluminum | 00000000 | 00000 | |
| 5/8"-18 | 5/8" | 16° | 1 1/2" | 3/4" | 2 1/2" | 1 3/8" | 8,500 | Anodized 7075 Aluminum | Right Hand | 000000000 | 00000 |
| 3/4"-16 | 3/4" | 14° | 1 3/4" | 7/8" | 2 7/8" | 1 9/16" | 13,300 | Anodized 7075 Aluminum | 00000000 | 00000 |