After shutting off power to equipment during a power failure, these cords must be manually reset, preventing unexpected equipment start-up. Use them to replace three-wire power cords on equipment driven by small single-phase motors. The industry designation is SJTO, so the insulation resists oil.

Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.

All cords have a country-specific plug to power equipment on international outlets.

Cords with a 90° elbow plug fit flush against a wall outlet, so they fit behind machinery or in areas where space is tight.

These self-coiling cords stretch to full length and then return to their retracted length for tangle-free storage. The industry designation is SJEOW, so the insulation resists oil and water.

Stop electric shocks before they happen—these cords cut power to equipment when they detect an unsafe current. Once the surge has passed, an automatic reset resumes the flow of power. These SJTW cords have insulation that protects them from water, so they’re safe to use in outdoor charging stations and other wet areas. To help it fit behind machinery and in other tight spaces, the plug has a 90° elbow that sits flush against outlets. Hardwire the other end to your equipment or attach an electrical connector to make your own GFCI-protected extension cord.

For technical drawings and 3-D models, click on a part number.

Plug these cords into fans that have quick-disconnect terminals. The industry designation is SPT, so they have a flat cord shape.

Cords with a 90° elbow socket fit flush against the fan, so they fit in tight spaces.

Cords with a 45° elbow socket fit close against the fan.

Those with a temperature switch turn a fan on when the temperature reaches 88° F and off when it falls to 80° F. They are not adjustable.