We will reply to your message within an hour.
Extend your socket's reach.
Safely extend your reach in areas where you could accidentally come into contact with live circuits.
Safely lengthen the reach of your socket while working near flammable vapors and combustible residue.
The male ends of these extensions are rounded, so they can pivot to use your tool at an angle.
Lock your socket into these extensions to prevent accidental disengagement.
Bend these socket extensions around obstructions to turn hard-to-reach fasteners.
Convert from one square drive size to another.
Push the square drive through the adapter to change size.
These adapters are insulated to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900.
Fit these adapters between your wrench and socket to enable finger tightening.
Lock the adapter on your tool and the socket to the adapter to prevent accidental disengagement.
Turn sockets with a bit screwdriver.
Change a standard wrench handle into a ratcheting wrench.
Pivot the head to access fasteners from an angle.
A digital display shows how torque measurements change as you turn the wrench. Set the desired torque and angle—lights and an audible alarm indicate when target has been reached or exceeded.
Set a desired torque within the range.
Adapters are set to a specific torque and cannot be adjusted.
Attach one of these adapters to a socket to turn it with an open-end or box wrench.
Attach to your socket for a longer reach.
Lock your socket into the extension to prevent accidental disengagement.
A magnet holds the socket, making changes quicker.
Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.
Pull the collar to quickly attach and remove sockets.
Use sockets with tools that accept hex shanks, such as impact drivers and power drills.
Bend these extensions around obstructions to access hard-to-reach fasteners.
First developed for aerospace and automotive assembly processes, these extensions will stand up to your high-volume production and assembly lines.
Lock your socket into the extension to prevent accidental disengagement..
Eliminate the need for multiple bulky tools with these bit adapters. At less than 3 inches long, these compact adapters convert ¼” bit screwdriver handles and ¼” bits into torque screwdrivers so you can fasten to a specific torque.
Power mobile devices such as smartphones and tablets when electricity is unavailable.
Save energy by automatically turning off unused outlets—the master outlet controls the follower outlets and shuts off power to those outlets when a device plugged into the master is turned off.
The power switch to these outlet strips is on an extension cord, so you can control power even when the strips are in hard to reach places, such as under a desk.
Separately control each device plugged into these strips—each outlet has its own power switch.
Often used in offices and workstations, these outlet strips power multiple devices from a single wall outlet.
Filters between the outlets on these strips protect computers and other sensitive equipment from external signals that interfere with the equipment’s performance.
Also known as hospital-grade outlet strips, these outlets have an extra-tight fit to prevent plugs from detaching. They are marked with a green dot.
A filter through the middle isolates two pairs of outlets, so high voltage equipment plugged into one pair won’t affect the other pair.
Keep personnel safe from electric shock with ground fault protection.
With a rubber housing, these outlet strips withstand drops and other impact.
Power computers, lab equipment, and office machines that have IEC connections.
A combination of an outlet box, cord, and duct, these outlet strips minimize tripping hazards and protect the cord from damage.
Connect multiple devices from a single outlet.
Automatically power heating and cooling devices on and off when temperatures rise or drop.
Mount these outlet strips to a desktop or workbench with the mounting hardware, or set them on a surface.
No need for mounting hardware—these outlet strips have magnets on the back to stick to steel walls, cabinets, and other magnetic surfaces.
Create a permanent outlet system without opening walls. These outlet strips mount to a wall with clips and hardwire to an existing electrical system.
Mount these strips into standard 19" wide electronics racks and enclosures.
Bring power to workstations that are not near a wall—these poles mount from the ceiling.
These curved outlet strips clamp onto a pole or table leg.
Install these extra-long strips onto the frame of an electrical cabinet.
Power devices above and below your workbench while keeping your outlet strip out of the way.
Attach these splitters to an extension cord to power multiple devices from one cord.
Avoid the clutter of multiple extension cords and overcrowded outlet strips—these extension cords have outlet boxes spread evenly along their length.
Insulated to resist water, oil, and solvents, these cords withstand dirty and greasy environments.
Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.
In addition to an outlet on the end, these cords have multiple inline outlets.
Put overhead outlets in arm’s reach.
A locking lever on the socket keeps multiple devices connected to these extension cords.
Designed for indoor use, these cords are often used to power appliances.
Power multiple devices with one extension cord.
The insulation on these cords resists water, so they can be used outdoors.
Charge up to eight batteries at once.
Bring batteries to these chargers for maintenance.
After the battery is fully charged, these chargers continuously provide a low-level charge to maintain the battery without overcharging.
Charge batteries even in wet environments—a sealed housing keeps water out.
Charge multiple devices at once.
These chargers are for use with most DeWalt batteries, except Univolt batteries.
Keep Bosch tool batteries powered with these chargers.
Energize Milwaukee tool batteries with these chargers.
Recharge batteries for Makita tools.
Use these chargers with Black & Decker batteries.
Restore power to batteries for Dremel tools.
Add grounding or surge suppression protection.
Use these extenders when bulbs are too short to fit into deep or recessed fixtures.
Insert your Morse taper arbor into one of these extensions to get additional reach.
If your Morse taper arbor is too small or large for your machine spindle, insert it into one of these adapters. Also known as sleeves or shell sockets.
Lengthen the stem of your tire valve for easier access.