Avoid the clutter of multiple extension cords and overcrowded outlet strips—these extension cords have outlet boxes spread evenly along their length. They’re great for powering temporary workstations and areas with few wall outlets, such as construction or maintenance sites.

Each outlet box has cord grips on both ends for a connection that isn’t easy to yank out. The cord grips also take strain off the cord if it’s bent or pulled. Insulated with rubber and SOOW designated, these cords resist breaking down from oil, water, and chemicals. They won’t tear if dragged along the ground, and their outlet boxes won’t crack if dropped.

Cords with six outlets have an outlet box at the end.

Cords with seven outlets can be attached to another cord, so you can extend the length of your run.

Keep personnel safe from electric shock with these cords. The industry desgination is SJTW, so the insulation resists water.

Cords with manual GFCI reset prevent unexpected start-up.

Cord with a power-indicating light have a light on the socket that illuminates when the cord has power.

Change the connection style between an outlet and your equipment.

NEMA 14-30 and NEMA 14-50 adapters are commonly used to charge electric vehicles.

Adapters with a power-indicating light have a light on the socket that illuminates when the adapter has power.

Use SJT adapters in dry or damp locations. STW and SJTW adapters have a water-resistant outer insulation. STOW and SJTOW adapters have an oil- and water-resistant outer insulation.

For technical drawings and 3-D models, click on a part number.

Power multiple devices from the same outlet with these splitters.

Two-outlet and three-outlet splitters plug into an outlet or extension cord. STOW splitters have an oil- and water-resistant insulation.

For technical drawings and 3-D models, click on a part number.

Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.

For technical drawings and 3-D models, click on a part number.

Use these cords with computers, lab equipment, and office machines that have IEC connections.

Use SJT cords in dry or damp environments.

Provide power to multiple devices with these outlet strips. A circuit breaker prevents damage from current overload and short circuits.

The face of 360° outlets rotate a full circle.

Fasten mounting clips to a surface, and snap the channel on the back of outlet strips into the clips.

Keep personnel safe from electric shock with ground fault protection.

Flip-down covers protect outlets from dust when not in use.

Strips with an automatic reset immediately regain power after ground is established.

With a rubber housing, these outlet strips withstand drops and other impact.

Outlet strips with screw terminals allow you to attach your own power cord.

Install these extra-long strips onto the frame of an electrical cabinet. Screw the included mounting clips to the cabinet and snap the strips into the clips.

Bring power to workstations that are not near a wall—these poles mount from the ceiling. They are internally divided to accommodate power cable on one side and telephone and data cable on the other. Add phone jacks or RJ45 sockets to the knockouts to connect telephone and data cable, or run cable to equipment through the knockouts. Carpet/floor grippers hold fast on the flooring, so there’s no need to cut carpet or drill into the floor.

Change a turn-lock to a straight-blade connection, or a straight-blade to a turn-lock connection.

For technical drawings and 3-D models, click on a part number.

Cover unused electrical outlets or plug prongs to protect them from dust, dirt, liquids, and other contaminants.

Built to handle tough, repetitive-use applications, these are more durable than standard straight-blade connectors.

Note: The current rating of your plug should not exceed that of your socket or receptacle.

For technical drawings and 3-D models, click on a part number.

90° elbow plugs with a rotating face can be plugged in at any angle.

Note: The current rating of your plug should not exceed that of your socket or receptacle.

For technical drawings and 3-D models, click on a part number.

Access the wire connection by opening the hinged housing. The housing is impact-resistant plastic.

Note: The current rating of your plug should not exceed that of your socket.

For technical drawings and 3-D models, click on a part number.

Check the status of your ground connection—a green light signals that connectors have power and are safely grounded. A red light indicates power only. The lights are visible from any angle for quick identification.

Note: The current rating of your plug should not exceed that of your socket.

For technical drawings and 3-D models, click on a part number.

Protect computers and other sensitive equipment from electromagnetic interference (EMI).

Plugs do not limit EMI on their own.

Note: The current rating of your plug should not exceed that of your receptacle.

For technical drawings and 3-D models, click on a part number.

Also known as hospital-grade connectors, these have an extra-tight fit when mated to remain secure in high-vibration environments. The housing is impact-resistant plastic.

Plugs and sockets are clear so you can view wire connections. 90° elbow plugs have a rotating face to plug in at any angle.

Note: The current rating of your plug should not exceed that of your socket or receptacle.

For technical drawings and 3-D models, click on a part number.

A rubber housing protects these connectors from damage caused by drops and impact. They are not intended for use in wet or damp environments.

Note: The current rating of your plug should not exceed that of your socket.

For technical drawings and 3-D models, click on a part number.

All connectors have a multiple-ring seal and rubber housing to keep out liquid. They resist heat, oil, and chemicals. When mated, connectors meet NEMA 6P, NEMA 12, and either IP67 or IP69K.

Connectors that meet IP67 resist temporary submersion.

Connectors that meet IP69K resist high-pressure washdowns.

Plugs mate with female receptacles and female sockets with an attached cover.

Cord splitters power multiple devices from a single outlet.

Note: The current rating of your plug should not exceed that of your socket or receptacle.

For technical drawings and 3-D models, click on a part number.

Rated NEMA 6P, 13, IP66, and IP69K when mated, connectors withstand oil/coolant spraying; temporary submersion; high-pressure, high-temperature washdowns; and are corrosion resistant so they can be used in marine environments.

Plugs have a multiple-ring seal to keep out liquid when mated. They have a locking ring that screws together with sockets and receptacles so connections remain secure in high-vibration applications such as oil drilling and mining operations.

Sockets and receptacles have an attached cover that creates a watertight seal when not in use.

Note: The current rating of your plug should not exceed that of your socket or receptacle.

For technical drawings and 3-D models, click on a part number.

Stainless steel hardware and nickel-plated blades or slots protect connections from damage in corrosive environments. The housing is impact-resistant plastic.

Note: The current rating of your plug should not exceed that of your socket or receptacle.

For technical drawings and 3-D models, click on a part number.